Now showing items 2221-2240 of 3450

    • Field Verification of Model-Derived Natural Frequencies of a Drill String 

      Pushkar N. Jogi; Michael Neubert; John D. Macpherson (The American Society of Mechanical Engineers (ASME), 2002)
      Vibrations generated in a drill string while drilling generally lead to a reduction in drilling efficiency and often cause premature failure of drill string components and bit damage. It is ...
    • Methods to Estimate the Rock Strength and Tooth Wear While Drilling With Roller-Bits—Part 2: Insert Bits 

      H. Karasawa; J. C. Rowley; T. Ohno; M. Kosugi (The American Society of Mechanical Engineers (ASME), 2002)
      New methods to estimate both the rock strength and tooth wear while drilling with roller-bits were developed and proposed in Part 1. These methods were derived from the results of drilling ...
    • Measuring Reservoir Compaction Through Radioactive Marker Technique 

      Paolo Macini; Ezio Mesini (The American Society of Mechanical Engineers (ASME), 2002)
      Radioactive Marker Technique (RMT), an in-situ method to measure reservoir rock compaction and to evaluate uniaxial compressibility coefficients (Cm), is examined here. Recent field applications ...
    • A New Approach to Evaluate Temperature Effects on Rheological Behavior of Formate-Based Fluids 

      Rosana F. T. Lomba; Carlos H. M. de Sá; Edimir M. Brandão (The American Society of Mechanical Engineers (ASME), 2002)
      Organic salt brines represent a good alternative to drill through deep productive zones. The literature presents these salts as thermal stabilizers of polymers used in the formulation of drill-in ...
    • Characteristics of Thermogravimetric Plants 

      S. Arosio; R. Carlevaro (The American Society of Mechanical Engineers (ASME), 2002)
      A nonconventional thermodynamic converter, called thermogravimetric system, capable of generating mechanical-electric energy is described in the present work. Such plant is basically an interesting ...
    • Methods to Estimate the Rock Strength and Tooth Wear While Drilling With Roller-Bits—Part 1: Milled-Tooth Bits 

      H. Karasawa; J. C. Rowley; T. Ohno; M. Kosugi (The American Society of Mechanical Engineers (ASME), 2002)
      This paper proposes new methods to estimate both the rock strength and tooth wear while drilling with roller-bits. Laboratory drilling tests were conducted to obtain the penetration rate, bit ...
    • Efficiency of Advanced Ground Transportation Technologies 

      Frank Kreith; ASME Fellow; Ron E. West; Professor (Emeritus) of Chemical Engineering; Beth E. Isler (The American Society of Mechanical Engineers (ASME), 2002)
      This paper presents thermodynamic analyses of ten different scenarios for using natural gas to power motor vehicles. Specifically, it presents a comparison between different types of automotive ...
    • Friction on PDC Cutters at High Normal Stress 

      John R. Smith; Jeffrey B. Lund; Robert K. Galloway (The American Society of Mechanical Engineers (ASME), 2002)
      The impact of frictional forces on the overall forces when drilling with a PDC bit has previously been implied by models and by single cutter and bit tests. This report describes new experiments ...
    • Analysis of a Large Scale Liquid Hydrogen Dispersion Using the Multi-Phase Hydrodynamics Analysis Code (CHAMPAGNE) 

      K. Chitose; K. Takeno; K. Hayashi; M. Hishida; M. Okamoto (The American Society of Mechanical Engineers (ASME), 2002)
      It is planned to use hydrogen extensively as a source of clean energy in the new century. As part of our investigation for an International Clean Energy Network Using Hydrogen Conversion ...
    • Global Optimization of Gas Allocation to a Group of Wells in Artificial Lift Using Nonlinear Constrained Programming 

      Gabriel A. Alarcón; Luis E. Gómez; Carlos F. Torres (The American Society of Mechanical Engineers (ASME), 2002)
      Continuous flow gas lift is one of the most common artificial lift methods widely used in the oil industry. A continuous volume of high-pressure gas is injected as deep as possible into the ...
    • Impact of Perforating on Well Performance and Cumulative Production 

      Turhan Yildiz (The American Society of Mechanical Engineers (ASME), 2002)
      This study presents a simplified method to predict inflow performance of and cumulative production from selectively perforated wells in bounded reservoirs. The model first calculates the pseudo-skin ...
    • A Simplified Semi-Analytical Model for Water-Coning Control in Oil Wells With Dual Completions System 

      Jakub Siemek; Jerzy Stopa (The American Society of Mechanical Engineers (ASME), 2002)
      In this paper, a mathematical model and numerical investigations on dynamic water/oil contact (WOC) in a reservoir with active bottom waters are addressed. An original analytical solution describing ...
    • Inflow Performance and Pressure Interference in Dual-Completed Wells With Water Coning Control 

      Andrew K. Wojtanowicz; Ephim I. Shirman (The American Society of Mechanical Engineers (ASME), 2002)
      Dual-completed wells with Downhole Water Sink (DWS) are used for water coning control in oil reservoirs with bottom water drive. In DWS wells, the second (bottom) completion—placed in the water ...
    • Drillstring Vibration and Wellbore Instability 

      João Carlos R. Plácido; Hélio M. R. Santos; Yadira Diaz Galeano (The American Society of Mechanical Engineers (ASME), 2002)
      Wellbore instability can be attributed to several causes. The ones thought to be most important include: chemical interaction with the drilling fluid, high tectonic stresses, and insufficient mud ...
    • Analysis of Leak-off Tests in Shallow Marine Sediments 

      Desheng Zhou; Andrew K. Wojtanowicz (The American Society of Mechanical Engineers (ASME), 2002)
      Typical analysis of the Leak-off testing (LOT) in wells assumes elastic wellbore and involves identification of diversion points from linear trends of the recorded plots. However, LOTs from wells ...
    • Numerical Simulation of Corrosion Inhibitor Transport in Pipelines Carrying Oil-Water Mixtures 

      Antonio Rojas-Figueroa; Yuri V. Fairuzov (The American Society of Mechanical Engineers (ASME), 2002)
      The transport of corrosion inhibitors in a pipeline carrying crude oil-water mixture has been studied using a transient liquid-liquid two-phase flow model. The fluid flow model (the hydrodynamic ...
    • Chemically Improved Filter Cakes for Drilling Wells 

      Neeraj S. Nandurdikar; Nicholas E. Takach; Stefan Z. Miska (The American Society of Mechanical Engineers (ASME), 2002)
      Blast furnace slag (BFS) is a latent hydraulic material similar in composition to Portland cement. BFS was originally studied for mud to cement (MTC) purposes. This application called for large ...
    • Introduction 

      Norio Arai; James P. Brill; Professor Emeritus and Research Professor of Petroleum Engineering (The American Society of Mechanical Engineers (ASME), 2001)
      It is a great honor for us to present this RAN98 Special Issue of the Journal of Energy Resources Technology (JERT), which consists of two invited keynote papers and eleven technical papers. ...
    • Initiation of SHS Flame Induced by Another SHS Flame—Evaluation of the Ignition Energy 

      Atsushi Makino (The American Society of Mechanical Engineers (ASME), 2001)
      Relevant to the self-propagating high-temperature synthesis (SHS) process, an analytical study has been made to investigate dependence of its flame initiation on system parameters, such as operating ...
    • Metal Recovery From the Waste Magnesia-Chromia Bricks With Arc Plasmas 

      N. Tanahashi; A. Takeuchi; K. Tanaka (The American Society of Mechanical Engineers (ASME), 2001)
      A process has been developed to detoxify the waste magnesia-chromia bricks containing sexivalent chromium and recover valuable materials with arc plasma treatment. Especially magnesium and chromium, ...