Now showing items 2241-2260 of 3450

    • Capacity Control for Refrigeration and Air-Conditioning Systems: A Comparative Study 

      Mohammad Yaqub; Syed M. Zubair (The American Society of Mechanical Engineers (ASME), 2001)
      The capacity control of a vapor-compression refrigeration system is investigated for three different capacity control schemes. In a hot-gas by-pass control scheme, the refrigerant is by-passed ...
    • A Computational Model of a Power Plant Steam Condenser 

      R. P. Roy; V. K. Gokhale; M. Ratisher (The American Society of Mechanical Engineers (ASME), 2001)
      A computational model of a power plant steam condenser which incorporates the effects of air in-leakage and removal on the performance of the condenser is reported. The condenser interior space ...
    • High-Temperature Reliability of Advanced Ceramics 

      Tatsuki Ohji (The American Society of Mechanical Engineers (ASME), 2001)
      This paper describes high-temperature reliability, particularly creep and creep rupture behavior of three engineering ceramics—silicon nitride, silicon carbide, and alumina-based silicon-carbide-particulate ...
    • Editorial 

      Andrew K. Wojtanowicz (The American Society of Mechanical Engineers (ASME), 2001)
      Although I assumed the Editorship of the ASME Journal of Energy Resources Technology (JERT) at the beginning of January 2001, the transition process of this important and complex job from Jim ...
    • Editorial 

      Jim Brill (The American Society of Mechanical Engineers (ASME), 2001)
      It is hard to believe that five years have passed since I assumed the Editorship of the ASME Journal of Energy Resources Technology. With my recent early retirement from The University of ...
    • Influence of Circuitry Arrangement on the Pressure Drops of Two-Row Finned Tube Evaporators 

      Chi-Chuan Wang; Senior Researcher; Min-Sheng Liu; Associate Researcher; Jin-Sheng Leu; Researcher (The American Society of Mechanical Engineers (ASME), 2001)
      This study experimentally investigates the effect of circuitry on the refrigerant-side pressure drops of plate finned tube evaporators. Experiments were performed with countercross, parallel-cross, ...
    • Fundamental Study on a Novel Gas Turbine Cycle 

      Masaru Ishida; Hongguang Jin (The American Society of Mechanical Engineers (ASME), 2001)
      It is important and necessary to develop a new technology for CO2 capture with less or even no energy penalty to make a breakthrough in greenhouse gas abatement. Towards this objective, we ...
    • Pyrolysis and Ignition Characteristics of Pulverized Coal Particles 

      Masayuki Taniguchi; Hidetaka Muto; Toshikazu Tsumura; Hirofumi Okazaki; Hironobu Kobayashi; Shigeru Azuhata; Hiroshi Miyadera (The American Society of Mechanical Engineers (ASME), 2001)
      Pyrolysis and ignition characteristics of pulverized coals were examined under similar burning conditions to those of industrial burners. In the early stage, fine particles (less than 37 μm) ...
    • Effects of Jet Reynolds Number on the Performance of Axisymmetric and Nonaxisymmetric Gas Burner Flames 

      Azfar Kamal; S. R. Gollahalli (The American Society of Mechanical Engineers (ASME), 2001)
      An investigation of the effects of burner exit Reynolds number on the relative effects of burner geometry (circular and elliptic with an aspect ratio 2:4) in a propane jet flame is presented. ...
    • Hydration of Partially Sulfated Lime Particles From Fluidized Bed Combustors 

      M. F. Couturier; Y. Volmerange; F. Steward (The American Society of Mechanical Engineers (ASME), 2001)
      The reaction between water and partially sulfated lime particles was studied under isothermal conditions using a microcalorimeter. Experiments were performed with spent sorbent particles from two ...
    • Modeling on Combustion Characteristics of Biocoalbriquettes 

      Hee-Joon Kim; Guo-Qing Lu; Ichiro Naruse; Jianwei Yuan; Kazutomo Ohtake (The American Society of Mechanical Engineers (ASME), 2001)
      A biocoalbriquette, a new artificial solid fuel, is manufactured by a mixture of coal and biomass under a high-compression pressure. The combustion characteristics of biocoalbriquettes were ...
    • Stability of Flames Close to Auto-Ignition Temperatures Generated by Extreme Separated Gas-Air Inlets 

      O. Piepers; P. P. Breithaupt; A. B. N. van Beelen (The American Society of Mechanical Engineers (ASME), 2001)
      Stabilization of the combustion of natural gas in high-temperature processes by using the auto-ignition of the fuel when mixed with highly preheated air is well known and has found application ...
    • Catalytic Combustion of Pre-Vaporized Liquid Fuel 

      Masataka Arai; Kenji Amagai; Toshio Mogi (The American Society of Mechanical Engineers (ASME), 2001)
      Fundamental characteristics of the catalytic combustion of vaporized kerosene spray were experimentally investigated. This study is a part of the development of a ceramic gas turbine engine for ...
    • Life Cycle Assessment Estimation for Eco-Management of Co-Generation Systems 

      Seizo Kato; Naoki Maruyama; Yasuki Nikai; Hidekazu Takai; Anugerah Widiyanto (The American Society of Mechanical Engineers (ASME), 2001)
      A LCA (life cycle assessment) scheme for any industrial activity system is introduced to estimate the quantitative load on the environment with the aid of the NETS (numerical environment total ...
    • Gasification Kinetics of Coal Chars Carbonized Under Rapid and Slow Heating Conditions at Elevated Temperatures 

      Chunhua Luo; Tomokazu Watanabe; Makoto Nakamura; Shigeyuki Uemiya; Toshinori Kojima (The American Society of Mechanical Engineers (ASME), 2001)
      Measurements of CO2 gasification kinetics of coal chars at temperatures of 1273–1873 K were conducted by using a bench-scale fluidized bed reactor (FBR) made of alumina. The gasification rates ...
    • Advanced Coal-Fired Power Plants 

      Lawrence A. Ruth (The American Society of Mechanical Engineers (ASME), 2001)
      The U.S. Department of Energy is partnering with industry to develop advanced coal-fired electric power plants that are substantially cleaner, more efficient, and less costly than current plants. ...
    • Transportation Fuel Substitutes Derived From Biomass 

      S. Gouli; A. Serdari; S. Stournas; E. Lois (The American Society of Mechanical Engineers (ASME), 2001)
      This paper describes some of the recent work carried out in our laboratory regarding the effects of novel nitrogen compounds in gasoline and diesel fuel on ignition quality and on pollutant ...
    • Optical Analysis of Pulse Combustion Using Shadowgraph and Planar CH-LIF Imaging Technique 

      Yojiro Ishino; Tatsuya Hasegawa; Shigeki Yamaguchi; Norio Ohiwa (The American Society of Mechanical Engineers (ASME), 2001)
      Planar imaging of laser-induced fluorescence of CH radical is made to examine combustion processes in a valveless pulse combustor. An excimer-pumped dye laser tuned to a wavelength of 387 nm ...
    • NOx and N2O Formation Mechanisms—A Detailed Chemical Kinetic Modeling Study on a Single Fuel Particle in a Laboratory-Scale Fluidized Bed 

      Gerhard Löffler; Dietmar Andahazy; Christian Wartha; Franz Winter; Hermann Hofbauer (The American Society of Mechanical Engineers (ASME), 2001)
      NOx (i.e., NO and NO2) and N2O are known as harmful pollutants. In fluidized bed combustion these are formed from the nitrogen in the fuel. To develop effective primary measures reducing the ...
    • Bubble Analogy and Stabilization of Core-Annular Flow 

      Antonio C. Bannwart; Assoc. Mem. ASME (The American Society of Mechanical Engineers (ASME), 2001)
      A theory for the stabilization of annular liquid-liquid flow (i.e., core-annular flow) in a horizontal pipe is proposed. Based upon the analysis of the momentum conservation equation in the ...