Now showing items 2201-2220 of 3450

    • Combustion Characteristics of Heavy Liquid Fuels in a Bubbling Fluidized Bed 

      E. J. Anthony; D. Y. Lu; J. Q. Zhang (The American Society of Mechanical Engineers (ASME), 2002)
      Liquid fuels such as bitumen, tars, and pitches are byproducts of heavy oil upgrading processes, and are usually contaminated with high sulphur and sometimes heavy metals contents as well. ...
    • Performance Evaluation of a Window Room Air Conditioner With Microchannel Condensers 

      Man-Hoe Kim; Clark W. Bullard (The American Society of Mechanical Engineers (ASME), 2002)
      A performance evaluation for a residential window air conditioning system with microchannel condensers has been performed. First, a series of wind-tunnel calorimeter tests were conducted for two ...
    • Thermoeconomic Considerations in the Optimum Allocation of Heat Transfer Inventory for Refrigeration and Heat Pump Systems 

      Mohamed A. Antar; Syed M. Zubair (The American Society of Mechanical Engineers (ASME), 2002)
      Thermoeconomics is defined as attaching monetary values to heat exchanger conductances of a given plant. In this study, optimum allocation of heat transfer inventory for heat exchangers in a ...
    • A Practical Technique to Estimate the Formation Thickness of a Kicking Zone 

      G. Robello Samuel; Technical Advisor (R&D-Drilling); Thomas Engler; Assistant Professor and Chairman; Stefan Miska (The American Society of Mechanical Engineers (ASME), 2002)
      Characterization of formation while drilling continues to be a challenge to the engineers. When a well kicks while drilling, evaluation of pore pressure and the corresponding kill mud density ...
    • Modeling of Pig Assisted Production Methods 

      Hoi C. Yeung; Paulo C. R. Lima (The American Society of Mechanical Engineers (ASME), 2002)
      More and more transient gas-liquid operations in pipes have been successfully applied in the oil and gas industry. Pigging operation in two-phase pipelines to remove liquid accumulation or for ...
    • Synthesis and Analysis of Stroke-Increasing and Force-Balancing Mechanisms for Rod Pumping Units 

      Lu Yi; Tatu Leinonen (The American Society of Mechanical Engineers (ASME), 2002)
      This paper introduces a creative synthesis and analysis of stroke-increasing and force-balancing mechanisms for rod oil pumping units by using the systematic linkage technique. The corresponding ...
    • Proton Exchange Membrane Fuel Cell System Model for Automotive Vehicle Simulation and Control 

      Daisie D. Boettner; Gino Paganelli; Yann G. Guezennec; Giorgio Rizzoni; Michael J. Moran (The American Society of Mechanical Engineers (ASME), 2002)
      This paper describes a proton exchange membrane (PEM) fuel cell system model for automotive applications that includes an air compressor, cooling system, and other auxiliaries. The fuel cell ...
    • Available Energy—Part II: Gibbs Extended 

      Richard A. Gaggioli; David M. Paulus (The American Society of Mechanical Engineers (ASME), 2002)
      Since Gibbs, representations with formulas have been developed and are common, for the “available energy of body and medium.” Gaggioli has developed formulas which are more general, to represent ...
    • Screening Analysis for EPACT-Covered Commercial HVAC and Water-Heating Equipment 

      Sriram Somasundaram; Program Manager; Technology Systems Analysis; David W. Winiarski; David B. Belzer (The American Society of Mechanical Engineers (ASME), 2002)
      PNNL, under direction from DOE, conducted a screening analysis to determine the energy savings potential from the efficiency levels for commercial HVAC and water-heating equipment listed in ...
    • Effect of Liquid on a Reciprocating Compressor 

      B. G. Shiva Prasad (The American Society of Mechanical Engineers (ASME), 2002)
      Compressors are intolerant to liquids. In reciprocating compressors with inherently large volumetric displacement rates, all modes of liquid ingestion pose a serious problem and can even result ...
    • Entropy Production During Laser Picosecond Heating of Copper 

      Bekir Sami Yilbas (The American Society of Mechanical Engineers (ASME), 2002)
      Nonequilibrium energy transport taking place in the surface region of the metallic substrate due to laser short-pulse heating results in entropy production in electron and lattice systems. The ...
    • Performance Evaluation of Coriolis Mass Flowmeters 

      Mohammed N. Al-Khamis; Ali A. Al-Nojaim; Muhammad A. Al-Marhoun (The American Society of Mechanical Engineers (ASME), 2002)
      The first practical coriolis mass flowmeter was introduced in 1977. Today, there are several manufacturers which offer various coriolis mass flowmeters with different sensing tube configurations ...
    • Effects of Geometry on the Performance of a Downhole Orbital Vibrator 

      Robert R. Reynolds; Jack H. Cole; Zhen Yuan; Formerly; Graduate Research Assistant (The American Society of Mechanical Engineers (ASME), 2002)
      The influence of geometry on the pressure field within the confined, water-filled annulus between a central, vibrating cylinder and an outer, rigid enclosure is determined. A two-dimensional model ...
    • Comparison of the Flame Characteristics of Turbulent Circular and Elliptic Jets in a Crossflow 

      S. R. Gollahalli; D. Pardiwalla (The American Society of Mechanical Engineers (ASME), 2002)
      This study was directed to understand the coupling effects of the noncircular geometry of the burner and a crossflow on the combustion of gas jets. This paper compares the characteristics of ...
    • On-Board Reforming Effects on the Performance of Proton Exchange Membrane (PEM) Fuel Cell Vehicles 

      Daisie D. Boettner; Gino Paganelli; Yann G. Guezennec; Giorgio Rizzoni; Michael J. Moran (The American Society of Mechanical Engineers (ASME), 2002)
      This paper incorporates a methanol reformer model with a proton exchange membrane (PEM) fuel cell system model for automotive applications. The reformer model and fuel cell system model have ...
    • Enhancing the Performance Evaluation and Process Design of a Commercial-Grade Solid Oxide Fuel Cell via Exergy Concepts 

      Comas Haynes; Assoc. Mem. Asme; William J. Wepfer (The American Society of Mechanical Engineers (ASME), 2002)
      Fuel cell technology is a promising means of energy conversion. As the technology matures, process design and analysis are gaining importance. The conventional measures of fuel cell performance ...
    • The Stability of Fluid Production From a Flexible Riser 

      Jonathan A. Montgomery; Hoi C. Yeung (The American Society of Mechanical Engineers (ASME), 2002)
      The prediction of slug formation and slug size has a direct impact on the design of topsides separation facilities and flow assurance to the process. The characteristics and stability of liquid ...
    • Available Energy—Part I: Gibbs Revisited 

      Richard A. Gaggioli; David H. Richardson; Anthony J. Bowman (The American Society of Mechanical Engineers (ASME), 2002)
      The concept of available energy, as defined by Gibbs is revisited. Being more general, this concept of available energy differs from that referred to commonly by the same name, or as “exergy” ...
    • Investigation of Paraffin Deposition During Multiphase Flow in Pipelines and Wellbores—Part 1: Experiments 

      Ahmadbazlee Matzain; J. L. Creek; Mandar S. Apte; Hong-Quan Zhang; Michael Volk; James P. Brill (The American Society of Mechanical Engineers (ASME), 2002)
      Results are presented from two-phase flow wax deposition tests using a state-of-the-art, high-pressure, multiphase flow test facility. Wax deposition was found to be flow pattern specific and ...
    • A LCA/LCC Optimized Selection of Power Plant System With Additional Facilities Options 

      Anugerah Widiyanto; Seizo Kato; Naoki Maruyama (The American Society of Mechanical Engineers (ASME), 2002)
      In the past, the selection of an energy resource for electricity generation was dominated by finding the least expensive power generating plant. Although such an approach is essential, there ...