Journal of Energy Resources Technology: Recent submissions
Now showing items 2181-2200 of 3450
-
On Evaluating Efficiency of a Combined Power and Cooling Cycle
(The American Society of Mechanical Engineers (ASME), 2003)A combined power and cooling cycle is being investigated. The cycle is a combination of the Rankine cycle and an absorption refrigeration cycle. Evaluating the efficiency of this cycle is made ... -
Internal Entropy Generation Limits for Direct Sensible Thermal Storage
(The American Society of Mechanical Engineers (ASME), 2003)This paper presents results for the entropy generated internally during the charging and discharging processes of a direct, sensible thermal energy store. The two processes correspond to the ... -
Finite Element Stress Analysis of Composite Sucker Rods
(The American Society of Mechanical Engineers (ASME), 2003)Analysis of polymer-matrix composite sucker rod systems using finite element methods is performed. Composite sucker rods used in oil production fail mainly due to fatigue loading. In majority ... -
Erratum: “Modeling and Simulation of PEM Fuel Cells With CO Poisoning” [ASME J. Energy Res. Technol., 125, No. 2, pp. 94–100]
(The American Society of Mechanical Engineers (ASME), 2003)The contributed line should have read: -
Modeling of Slug Dissipation and Generation in Gas-Liquid Hilly-Terrain Pipe Flow
(The American Society of Mechanical Engineers (ASME), 2003)Hilly-terrain pipelines consist of interconnected horizontal, uphill and downhill sections. Slug flow experiences a transition from one state to another as the pipe inclination angle changes. ... -
Optimization on the Performance Characteristics of a Magnetic Ericsson Refrigeration Cycle Affected by Multi-Irreversibilities
(The American Society of Mechanical Engineers (ASME), 2003)A general irreversible cycle model of a magnetic Ericsson refrigerator is established. The irreversibilities in the cycle model result from the finite-rate heat transfer between the working ... -
Oxidation Characteristics of Light Hydrocarbons for Underbalanced Drilling Applications
(The American Society of Mechanical Engineers (ASME), 2003)This investigation is directly relevant to various applications associated with the safety aspects of underbalanced drilling operations where de-oxygenated air may be co-injected with oil-based ... -
Propagation of Turbulent Natural Gas/Air Flames in Tubing With 90° Bends
(The American Society of Mechanical Engineers (ASME), 2003)Anytime flammable gas mixtures are handled, there is a risk of combustion. This is particularly true in many industrial applications where space is limited and equipment is located near sources ... -
Minimum Fuel Consumption and CO Emission and Optimum Speed of the Motorcycle with a CVT
(The American Society of Mechanical Engineers (ASME), 2003)The simulated annealing algorithm with the Bessel method for curve fitting and the tensor product method for surface fitting is used to transform engine discrete experimental data into a form ... -
Modeling Time-Dependent Pore Pressure Due to Capillary and Chemical Potential Effects and Resulting Wellbore Stability in Shales
(The American Society of Mechanical Engineers (ASME), 2003)During drilling operations, the mud filtrate interacts with the pore fluid around the wellbore and changes pore pressure by capillary and chemical potential effects. Thus the change in pore ... -
A Ground Resistance for Vertical Bore Heat Exchangers With Groundwater Flow
(The American Society of Mechanical Engineers (ASME), 2003)A new ground resistance was developed for use in existing vertical bore heat exchanger (VBHEx) design algorithms. The new ground resistance accounts for the added heat transfer mode of convection ... -
Experimental Study of Low Liquid Loading Gas-Liquid Flow in Near-Horizontal Pipes
(The American Society of Mechanical Engineers (ASME), 2003)Gas-liquid two-phase flow exists extensively in the transportation of hydrocarbon fluids. A more precise prediction of liquid holdup in near-horizontal, wet-gas pipelines is needed in order to ... -
Proposed System for Hydrogen Production from Methane Hydrate with Sequestering of Carbon Dioxide Hydrate
(The American Society of Mechanical Engineers (ASME), 2003)Gas hydrates (clathrates) are molecular compounds with crystalline structure, formed under certain conditions of pressure and temperature for which gas molecules occupy structural lattices formed ... -
Application of Distributed Sensor Arrays for Monitoring Multiphase Processes
(The American Society of Mechanical Engineers (ASME), 2003)This paper presents a novel approach to designing sensors and instrumentation for monitoring and controlling multiphase processes. It is based on the use of distributed sensor arrays, embedded ... -
Unified Model for Gas-Liquid Pipe Flow via Slug Dynamics—Part 1: Model Development
(The American Society of Mechanical Engineers (ASME), 2003)A unified hydrodynamic model is developed for predictions of flow pattern transitions, pressure gradient, liquid holdup and slug characteristics in gas-liquid pipe flow at all inclination angles ... -
Unified Model for Gas-Liquid Pipe Flow via Slug Dynamics—Part 2: Model Validation
(The American Society of Mechanical Engineers (ASME), 2003)In Zhang et al. [1], a unified hydrodynamic model is developed for prediction of gas-liquid (co-current) pipe flow behavior based on slug dynamics. In this study, the new model is validated ... -
Low-Liquid Loading Multiphase Flow in Natural Gas Pipelines
(The American Society of Mechanical Engineers (ASME), 2003)Pressure and temperature variations of natural gas flows in a pipeline may cause partial gas condensation. Fluid phase behavior and prevailing conditions often make liquid appearance inevitable, ... -
Local Furnace Data and Modeling Comparison for a 600-MWe Coal-Fired Utility Boiler
(The American Society of Mechanical Engineers (ASME), 2002)Reductions in furnace exit gas temperature (FEGT) by changing boiler operating variables and/or adding wall soot blowers and/or lowering burner elevations are investigated. Evaluation of these ... -
Thermal Charge Conditioning for Optimal HCCI Engine Operation
(The American Society of Mechanical Engineers (ASME), 2002)This work investigates a purely thermal control system for HCCI engines, where thermal energy from exhaust gas recirculation (EGR) and compression work in the supercharger are either recycled ... -
Analysis of the Heat Transfer Mechanism in High-Temperature Circulating Fluidized Beds by a Numerical Model
(The American Society of Mechanical Engineers (ASME), 2002)A general numerical model is presented here to describe the complex fluid dynamics and the heat transfer process in high-temperature circulating fluidized beds (CFBs). The core-wall concept is ...