Modeling of Slug Dissipation and Generation in Gas-Liquid Hilly-Terrain Pipe Flow
View/ Open
Date
2003Author
Subash S. Jayawardena
Clifford L. Redus
Cem Sarica
Hong-Quan Zhang
Eissa M. Al-Safran
James P. Brill
Metadata
Show full item recordAbstract
Hilly-terrain pipelines consist of interconnected horizontal, uphill and downhill sections. Slug flow experiences a transition from one state to another as the pipe inclination angle changes. Normally, slugs dissipate if the upward inclination becomes smaller or the downward inclination becomes larger, and slug generation occurs vice versa. Appropriate prediction of the slug characteristics is crucial for the design of pipeline and downstream facilities. In this study, slug dissipation and generation in a valley pipeline configuration (horizontal-downhill-uphill-horizontal) were modeled by use of the method proposed by Zhang et al. The method was developed from the unsteady continuity and momentum equations for two-phase slug flow by considering the entire film zone as the control volume. Computed results are compared with experimental measurements at different air-mineral oil flow rate combinations. Good agreement is observed for the change of slug body length to slug unit length ratio.