Journal of Structural Engineering: Recent submissions
Now showing items 4381-4400 of 10765
-
Failure Assessment of Lightly Reinforced Floor Slabs. I: Experimental Investigation
(American Society of Civil Engineers, 2011)This paper is concerned with the ultimate behavior of lightly reinforced concrete floor slabs under extreme loading conditions. Particular emphasis is given to examining the failure conditions of idealized composite slabs ... -
Comparisons of the Computed and Measured Behavior of Curved Steel I-Girders during Lifting
(American Society of Civil Engineers, 2012)The stability of I-girders during erection can be difficult to assess because of the limited presence of bracing and uncertainty in the support conditions of the girders. The behavior of curved girders during the early ... -
Local Buckling Analysis of Longitudinal Reinforcing Bars
(American Society of Civil Engineers, 2012)The local buckling behavior of longitudinal reinforcing steel, which occurs between two transverse hoops, is examined using rational mechanics, taking into account the full plastic behavior of the steel and the effects of ... -
Timber Frame Moment Joints with Glued-In Steel Rods. I: Design
(American Society of Civil Engineers, 2012)Significant evidence based on experimental research exists to give designers confidence in the use of theoretical equations to evaluate the pullout strength of threaded steel rods glued into timber. However, the mechanism ... -
Seismic Design and Performance of Self-Centering Steel Plate Shear Walls
(American Society of Civil Engineers, 2012)The self-centering steel plate shear wall (SC-SPSW) is a new seismic load-resisting system that combines the strength and stiffness properties of the SPSW with the recentering capabilities of posttensioned (PT) beam-to-column ... -
Peak Factors for Non-Gaussian Load Effects Revisited
(American Society of Civil Engineers, 2011)The estimation of the extreme of non-Gaussian load effects for design applications has often been treated tacitly by invoking a conventional peak factor on the basis of Gaussian processes. This assumption breaks down when ... -
Progressive Collapse Resistance of an Actual 11-Story Structure Subjected to Severe Initial Damage
(American Society of Civil Engineers, 2011)Progressive collapse resistance of an actual 11-story reinforced concrete structure following severe initial damage is studied experimentally and analytically. The initial damage was caused by simultaneous explosion (removal) ... -
Analytical Modeling and Design Validation of Posttensioned Precast Concrete Coupling Beams for Seismic Regions
(American Society of Civil Engineers, 2012)This paper provides an experimental validation on the analytical modeling and design of unbonded posttensioned precast concrete coupling beams. Previous test results from a series of floor-level coupling beam subassembly ... -
Testing and Analysis of Steel and Concrete Beam-Column Assemblies under a Column Removal Scenario
(American Society of Civil Engineers, 2011)This paper presents an experimental and computational assessment of the performance of steel and reinforced concrete beam-column assemblies under monotonic vertical displacement of a center column, simulating a column ... -
Probabilistic Capacity Models and Fragility Estimates for Steel Pedestals Used to Elevate Bridges
(American Society of Civil Engineers, 2011)Using steel pedestals has become an effective method for elevating simply supported bridges in the United States. However, a method is needed to estimate their lateral load capacity and probability of failure subjected to ... -
Rapid Seismic Rehabilitation Strategy: Concept and Testing of Cable Bracing with Couples Resisting Damper
(American Society of Civil Engineers, 2012)The goal of this study is to design and evaluate simple and rapid seismic retrofit devices for relatively small rehabilitation projects for steel structures. These designs are consistent with the tenets of sustainable ... -
Analytical and Numerical Modeling of Prestressed Continuous Steel-Concrete Composite Beams
(American Society of Civil Engineers, 2011)A loading capacity analysis is conducted for prestressed continuous steel-concrete composite beams. On the basis of the basic theoretical framework of the solution of externally unbonded prestressed structures, formulas ... -
Long-Term Behavior of Prestressed LVL Members. I: Experimental Tests
(American Society of Civil Engineers, 2011)This paper presents the results of experimental tests undertaken to resolve questions regarding the viability of multistory prestressed timber structures, specifically the reduction in the prestress load over time. Reduced- ... -
Long-Term Behavior of Prestressed LVL Members. II: Analytical Approach
(American Society of Civil Engineers, 2011)This paper investigates the long-term behavior of beams and frames made from laminated veneer lumber (LVL) prestressed with unbonded tendons. A formula for the evaluation of the prestress losses during the service life was ... -
Numerical Investigation on the Behavior of Circumferentially Butt-Welded Steel Circular Hollow Section Flexural Members
(American Society of Civil Engineers, 2011)This paper presents a finite element (FE) analysis to quantify the effects of weld-induced residual stresses on the flexural behavior of circumferentially butt-welded steel circular hollow section (CHS) members. FE modeling ... -
Performance of CUF Approach to Analyze the Structural Behavior of Slender Bodies
(American Society of Civil Engineers, 2012)This paper deals with the accurate evaluation of complete three-dimensional (3D) stress fields in beam structures with compact and bridge-like sections. A refined beam finite-element (FE) formulation is employed, which ... -
Discussion of “Progressive Collapse Resistance of Steel-Concrete Composite Floors” by Yasser Alashker, Sherif EI-Tawil, and Fahim Sadek
(American Society of Civil Engineers, 2011) -
Finite-Element Models for Slender, Posttensioned Masonry Walls Loaded Out-of-Plane
(American Society of Civil Engineers, 2011)Nonlinear finite-element models were developed, verified, and used to simulate the measured response of twelve 3.54 m (11.6 ft) tall posttensioned masonry walls with -
Probabilistic Robustness Assessment of Pre-Northridge Steel Moment Resisting Frames
(American Society of Civil Engineers, 2011)This paper investigates the robustness of moment-resisting steel frames that are typical of building construction in seismic regions before the 1994 Northridge earthquake against progressive (disproportionate) collapse. ... -
Transverse Stirrup Configurations in RC Wide Shallow Beams Supported on Narrow Columns
(American Society of Civil Engineers, 2012)This paper addressed the influence of stirrup configurations in wide beams on the effectiveness of stirrups in contributing to shear resistance as a ratio of the nominal shear stirrup strength. The evaluation was made by ...