• Login
    View Item 
    •   DSpace Home
    • ASCE
    • Journal of Structural Engineering
    • View Item
    •   DSpace Home
    • ASCE
    • Journal of Structural Engineering
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Long-Term Behavior of Prestressed LVL Members. I: Experimental Tests

    Thumbnail
    View/Open
    %28asce%29st%2E1943-541x%2E0000445.pdf (1.089Mb)
    Date
    2011
    Author
    Matthew Davies
    Massimo Fragiacomo
    Metadata
    Show full item record
    Abstract
    This paper presents the results of experimental tests undertaken to resolve questions regarding the viability of multistory prestressed timber structures, specifically the reduction in the prestress load over time. Reduced- and large-scale specimens were tested for 1 year in controlled and uncontrolled heated indoor conditions. Specimens included beams and two-bay frames made from radiata pine laminated veneer lumber (LVL) with a box-shaped cross section. The prestress load was applied through the center of the section by using an unbonded tendon. All relevant quantities such as load in the prestress tendon, deflection, timber moisture content, environmental temperature, and relative humidity were monitored throughout the test. Functions were fitted to the one-year experimental curves and then used to indicate more clearly the trends of the prestress losses during the testing. For a beam in which all timber is loaded parallel to the grain, a reduction in prestress of 1.4% was found after 1 year, whereas for a frame in which 11% of its length is loaded perpendicular to the grain, the loss increased to 7% because of the presence of columns. Furthermore, an attempt was made to separate the contributions made to prestress losses by key factors, namely creep and mechano-sorption of the LVL that is parallel and perpendicular to the grain; relaxation of the prestressing strand; and shrinkage/swelling on account of environmental variations. The most important factor is the proportion of timber that is loaded perpendicular to grain compared with the timber loaded parallel to grain.
    URI
    http://yetl.yabesh.ir/yetl/handle/yetl/68311
    Collections
    • Journal of Structural Engineering

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV