Journal of Structural Engineering: Recent submissions
Now showing items 4401-4420 of 10765
-
Estimation of Error Factors in Concrete Cable-Stayed Structures with Sensitivity of Creep
(American Society of Civil Engineers, 2011)This study proposes a method for estimating the properties of concrete creep and the unstrained length of cable, by using measured displacements and cable tension forces, in a concrete cable-stayed structure over time. The ... -
Opposing Theories and the Buckling Strength of Unequal-Leg Angle Columns
(American Society of Civil Engineers, 2011)A structural engineer wishing to determine the buckling load of unequal-leg angle columns receives conflicting information from published literature because researchers offer two radically different models for their analyses ... -
End-Loaded Shallow Curved Beams
(American Society of Civil Engineers, 2011)This note examines the linear response of thin, shallow curved beams to an axially-directed compressive load. The response is tracked with a rise parameter drawn from related work on linear arches through which it is shown ... -
Seismic Behavior of a Coupled Wall System with HPFRC Materials in Critical Regions
(American Society of Civil Engineers, 2011)High-performance fiber-reinforced concrete (HPFRC) materials have a unique strain-hardening behavior in tension that translates into enhanced structural response, especially under reversed cyclic loading. Recent experimental ... -
High-Rise Reinforced Concrete Structures: Database-Assisted Design for Wind
(American Society of Civil Engineers, 2011)Advances in wind pressure measurement and computer technology have made time-domain analyses of wind effects on high-rise structures possible in recent years. Time-domain solutions use aerodynamic and wind climatological ... -
Simplified Lateral-Torsional Buckling Analysis in Special Truss-Reinforced Composite Steel-Concrete Beams
(American Society of Civil Engineers, 2011)The paper addresses the lateral-torsional buckling for a special steel truss structure which is adopted to reinforce a particular class of composite steel-concrete beams. The investigated instability phenomenon deals with ... -
Storm and Gust Duration Effects on Design Wind Loads for Glass
(American Society of Civil Engineers, 2011)Duration effects on the design wind loads for glass are examined with respect to ASCE 7-10. Pressure time histories are created by combining variations of wind speed and wind direction from a “design cyclone” with pressure ... -
Eliminating Shrinkage Effect from Moment Curvature and Tension Stiffening Relationships of Reinforced Concrete Members
(American Society of Civil Engineers, 2011)Experimental results on cracking and deformation behavior of RC members subjected to short-term loading are frequently misinterpreted because shrinkage effect is not taken into account. Even at first loading, free shrinkage ... -
Numerical Modeling of LiteSteel Beams Subject to Shear
(American Society of Civil Engineers, 2011)A LiteSteel beam (LSB) is a new cold-formed steel hollow flange channel beam produced by using a patented manufacturing process involving simultaneous cold-forming and dual electric resistance welding. It has the beneficial ... -
Analysis of Structural Response of WTC 7 to Fire and Sequential Failures Leading to Collapse
(American Society of Civil Engineers, 2012)This paper presents the structural analysis approach used and results obtained during the investigation conducted by the National Institute of Standards and Technology (NIST) to model the sequence of fire-induced damage ... -
Dynamic Testing and Structural Identification of the Hypo Bank Office Complex. II: Identification
(American Society of Civil Engineers, 2011)The Hypo Bank headquarters complex, a structure formed by two adjacent seven-story buildings, was subjected to a series of harmonic forced vibration tests in August 2005. In Part I of this research, the natural frequencies, ... -
Use of Wavelet-Based Damage-Sensitive Features for Structural Damage Diagnosis Using Strong Motion Data
(American Society of Civil Engineers, 2011)This paper introduces three wavelet-based damage-sensitive features (DSFs) extracted from structural responses recorded during earthquakes to diagnose structural damage. Because earthquake excitations are nonstationary, ... -
Deterioration Modeling of Steel Components in Support of Collapse Prediction of Steel Moment Frames under Earthquake Loading
(American Society of Civil Engineers, 2011)Reliable collapse assessment of structural systems under earthquake loading requires analytical models that are able to capture component deterioration in strength and stiffness. For calibration and validation of these ... -
Harmony Search Method for Multimodal Size, Shape, and Topology Optimization of Structural Frameworks
(American Society of Civil Engineers, 2011)This paper describes and demonstrates modifications of the harmony search method to support multimodal structural optimization. Several researchers have recognized the potential of population-based optimization methods, ... -
Welded Sleeve Connection Design of Cantilevered Steel Sign Structures
(American Society of Civil Engineers, 2011)Cantilevered steel sign structures are widely used for on-premises freestanding signs. A welded sleeve connection detail is commonly used to splice pipes of different diameters. This type of structure can be flexible and ... -
Mathematical Macromodeling of Infilled Frames: State of the Art
(American Society of Civil Engineers, 2011)The primary objective of this paper is to present a general review of the different macromodels used for the analysis of infilled frames. A number of distinct approaches in the field of analysis of infilled frames since ... -
Discussion of “Long-Term Behavior of Composite Beams under Positive and Negative Bending. I: Experimental Study” by Jiansheng Fan, Jianguo Nie, Quanwang Li, and Hao Wang
(American Society of Civil Engineers, 2011) -
Effective Stiffness of Squat Structural Walls
(American Society of Civil Engineers, 2011)Reinforced concrete (RC) structural walls are the primary lateral-load carrying elements in many structures designed to resist earthquakes. A review of the technical literature shows considerable uncertainty with regards ... -
Experimental Study on Fire Resistance of Building Seismic Rubber Bearings
(American Society of Civil Engineers, 2011)Eight building seismic rubber bearings (four uninsulated lead rubber bearings, one insulated lead rubber bearing, two uninsulated natural rubber bearings, and one insulated natural rubber bearing) were experimentally ... -
Prediction of Column Axial Forces in Inverted V-braced Seismic Steel Frames Considering Brace Buckling
(American Society of Civil Engineers, 2011)Brace buckling in inverted-V-braced frames induces the vertical unbalanced force. The columns in the braced bay should be designed, per the capacity design concept, to remain elastic for gravity load actions and additional ...