Journal of Structural Engineering: Recent submissions
Now showing items 3961-3980 of 10765
-
Seismic Behavior of a Modern Concrete Coupled Wall
(American Society of Civil Engineers, 2013)RC core walls are used commonly in modern building construction as the primary lateral load–resisting system. To meet architectural constraints, including elevator, stair, and doorway openings, common configurations include ... -
Progressive Collapse-Resisting Mechanisms of Reinforced Concrete Structures and Effects of Initial Damage Locations
(American Society of Civil Engineers, 2014)Computational simulations for analyzing progressive collapse resistance of structures following initial damage require specific attention to structural modeling of floor systems. In collapse analysis of RC structures, it ... -
Experimental Investigation on Lateral Performance of Timber-Steel Hybrid Shear Wall Systems
(American Society of Civil Engineers, 2014)This paper presents the results of an experimental study on the lateral performance of timber-steel hybrid shear wall systems. Such systems are composed of steel moment-resisting frames and infill wood-frame shear walls. ... -
Confinement of Columns and Wall Boundary Elements Using Headed Bars
(American Society of Civil Engineers, 2014)Two series of full-scale specimens were constructed and tested under pure axial load to investigate the effectiveness of confinement provided by headed bars. One series consisted of columns and the other series represented ... -
Experimental Analysis of the Fire Behavior of Finger-Jointed Timber Members
(American Society of Civil Engineers, 2014)Fire design models for timber structures usually consider both the loss in cross section attributable to charring and the temperature-dependent reduction of strength and stiffness of the uncharred residual cross section. ... -
Three-Dimensional Cyclic Beam-Truss Model for Nonplanar Reinforced Concrete Walls
(American Society of Civil Engineers, 2014)A three-dimensional nonlinear cyclic model for nonplanar reinforced concrete walls is presented. Nonlinear Euler-Bernoulli fiber-section beam elements are used to represent steel and concrete in the vertical direction, and ... -
Effects of Tendon Spacing on In-Plane Behavior of Posttensioned Masonry Walls
(American Society of Civil Engineers, 2014)In-plane behavior of unbonded posttensioned clay brick masonry walls are investigated using detailed finite-element (FE) models. FE models of three walls having different aspect ratios of 1.50, 1.00, and 0.67 are developed. ... -
Prediction of Cyclic Behaviors of Mild Steel at Large Plastic Strain Using Coupon Test Results
(American Society of Civil Engineers, 2014)In practice, engineers can usually only obtain material properties from monotonic tensile coupon tests. The aim of this paper is to predict cyclic plasticity of mild steel from coupon test results available. First, the ... -
Impact of Key System Parameters on the In-Plane Dynamic Response of a Cable Network
(American Society of Civil Engineers, 2014)Using crossties to connect a cable which has experienced or is prone to violent motions with its neighbors and form a cable network has been successfully applied to a number of cable-stayed bridges to control stay cable ... -
Pros and Cons of Rotating Ground Motion Records to Fault-Normal/Parallel Directions for Response History Analysis of Buildings
(American Society of Civil Engineers, 2014)According to the regulatory building codes in the United States (e.g., 2010 California Building Code), at least two horizontal ground motion components are required for three-dimensional (3D) response history analysis (RHA) ... -
Special Issue on NEES 1: Advances in Earthquake Engineering
(American Society of Civil Engineers, 2013) -
Application of Local Reference-Free Damage Detection Techniques to In Situ Bridges
(American Society of Civil Engineers, 2014)There are increasing demands to apply structural health monitoring (SHM) techniques to bridge structures. To meet these demands, our group has developed a suite of local SHM techniques that can detect particular types of ... -
Seismic Reliability Analysis of Wood Shear Walls Using Different Methods
(American Society of Civil Engineers, 2014)Seismic reliability analysis of wood structures has to take into consideration the uncertainties from many sources. This paper presented three methods to deal with the uncertainties from ground motion records, intensity ... -
Normal Strain-Adjusted Shear Strength Expression for Fully Grouted Reinforced Masonry Structural Walls
(American Society of Civil Engineers, 2014)Since the conclusion of the test programs carried out by the Joint U.S.–Japan Technical Coordinating Committee on Masonry Research (TCCMAR) during the 1970s and 1980s, there has been little progress made to enhance the ... -
Wood Block Tear-Out Resistance and Failure Modes of Timber Rivet Connections: A Stiffness-Based Approach
(American Society of Civil Engineers, 2014)Existing prediction models for parallel to grain wood failure in timber connections using dowel-type fasteners consider the minimum, maximum, or summation of the tensile and shear capacities of the failed wood block planes. ... -
Shear Capacity Enhancement of Existing Underground Wall Structures Using Postinstalled Reinforcing Bars
(American Society of Civil Engineers, 2014)Existing underground structures constructed prior to the past few decades do not meet the present seismic design code; therefore, these structures do not have sufficient shear strength to withstand large-magnitude earthquakes ... -
State-of-the-Art Review of Approaches for the Design of Timber Beams with Notches
(American Society of Civil Engineers, 2014)Notches are details that significantly reduce the load-carrying capacity of beams made of timber. The amount of reduction was the subject of investigation in numerous studies from an experimental or theoretical point of ... -
Three-Dimensional Effects and Collapse Resistance Mechanisms in Steel Frame Buildings
(American Society of Civil Engineers, 2014)This study investigates the robustness of a seismically designed steel moment frame building using 3-D nonlinear models. Computational simulations are carried out using validated models to investigate building response to ... -
Probabilistic Seismic Performance Assessment of Setback Buildings under Bidirectional Excitation
(American Society of Civil Engineers, 2014)In this paper, the seismic performance of one-side setback structures is investigated with a probabilistic approach. The effects of the simultaneous action of two orthogonal ground motion components on the performance of ... -
Modeling of Heat Transfer in Gas-Filled Furnace for Steel Members
(American Society of Civil Engineers, 2014)A heat transfer model for unprotected steel structural members was proposed in this study. The model accounts for both the variation of the steel emissivity during the fire growth and the view factor effect. The participation ...