Journal of Structural Engineering: Recent submissions
Now showing items 3941-3960 of 10765
-
Repairing Distortion-Induced Fatigue Cracks in Steel Bridge Girders Using Angles-with-Plate Retrofit Technique. I: Physical Simulations
(American Society of Civil Engineers, 2014)Physical simulations of 914 mm (36 in.) deep girder-cross frame subassemblies subjected to cyclic loading were carried out to study the effects of distortion-induced fatigue and to evaluate the effectiveness of a new ... -
Repairing Distortion-Induced Fatigue Cracks in Steel Bridge Girders Using Angles-with-Plate Retrofit Technique. II: Computer Simulations
(American Society of Civil Engineers, 2014)This paper presents the results from computer simulations of 914 mm (36 in.) deep girder-cross frame subassemblies to study the effects of distortion-induced fatigue and to evaluate the effectiveness of a newly proposed ... -
Numerical Modeling of New Semiactive Damper Actuator
(American Society of Civil Engineers, 2013)Recent investigations have demonstrated the ability of semiactive devices to reduce the structural vibration. In this paper, a new device called the semiactive damper actuator (SADA) is introduced, which reduces the vibration ... -
Bond Behavior of Plain Round Bars Embedded in Concrete Subjected to Biaxial Lateral Tensile-Compressive Stresses
(American Society of Civil Engineers, 2014)Owing to its importance to the assessment and design of reinforced concrete structures, the bond behavior of steel bars in concrete has been extensively studied. This paper presents an experimental investigation into the ... -
Structure-Independent Parallel Platform for Nonlinear Analyses of General Real-Scale RC Structures under Cyclic Loading
(American Society of Civil Engineers, 2014)Notwithstanding powerful computational simulation methodologies available today, there remain significant challenges: the plane-section assumption of popular fiber models, the scale limitations of sophisticated microscopic ... -
Effective Strip Method for the Design of Cold-Formed Steel Framed Shear Wall with Steel Sheet Sheathing
(American Society of Civil Engineers, 2014)The cold-formed steel framed shear wall sheathed with steel sheet sheathing (CFS-SSSW) is a code-approved lateral force resisting system for light-framed construction. The American Iron and Steel Institute provides design ... -
Size-Dependent Stress-Strain Model for Unconfined Concrete
(American Society of Civil Engineers, 2014)The stress-strain behavior of concrete under compression, both in the ascending and descending branches, is crucial in determining both the strength and ductility of reinforced concrete members. This material property is ... -
Comparison of Directional and Envelope Wind Load Provisions of ASCE 7
(American Society of Civil Engineers, 2014)ASCE 7-10 allows the design of the main wind force resisting system (MWFRS) of buildings with a mean roof height of less than 18.3 m (60 ft) by using either the directional procedure of Chapter 27 or the envelope procedure ... -
Modeling and Analysis of Single-Plate Shear Connections under Column Loss
(American Society of Civil Engineers, 2014)This paper presents a computational assessment of the behavior of single-plate shear (shear tab) connections in gravity frames under column-loss scenarios. Two-span beam assemblies without floor slabs are considered under ... -
Seismic Design of Ballasted Solar Arrays on Low-Slope Roofs
(American Society of Civil Engineers, 2014)Currently, ASCE standards require that nonstructural components of a building be positively attached to the building in regions of moderate to high seismicity. However, for solar arrays that bear on low-slope roofs, friction ... -
Transverse Stiffener Requirements to Develop Shear-Buckling and Postbuckling Resistance of Steel I-Girders
(American Society of Civil Engineers, 2014)Traditionally, the design of transverse stiffeners in the AISC and AASHTO specifications has been based on two criteria: a moment of inertia requirement to ensure near-zero lateral deflection of the stiffeners at the web ... -
Discrete-Like Crack Simulation of Reinforced Concrete Incorporated with Analytical Solution of Cyclic Bond Model
(American Society of Civil Engineers, 2014)This paper presents solutions of second-order ordinary differential equations on bond problems to estimate crack widths of reinforced concrete (RC) members subjected to repeated cyclic loads. Up to now, bond behaviors under ... -
Thermal and Mechanical Modeling of Load-Bearing Cold-Formed Steel Wall Systems in Fire
(American Society of Civil Engineers, 2014)Although a few fire experiments have been carried out on load-bearing cold-formed steel (CFS) wall systems, the understanding of their fire performance is still limited, and further parametric analysis on the basis of such ... -
State of the Art: Seismic Behavior of Wood-Frame Residential Structures
(American Society of Civil Engineers, 2014)There are about 80 million single-family dwellings (SFDs) in the United States, predominantly of wood-frame construction. Of these, 68% are owner-occupied. A home is typically the largest single investment of a family, and ... -
Lateral Force–Displacement Response of Unreinforced Masonry Walls with Flanges
(American Society of Civil Engineers, 2014)The experimental in-plane force-displacement response of unreinforced masonry (URM) walls with flanges (return walls) subjected to pseudo-static cyclic lateral loading is presented. Each wall failed in a diagonal tension ... -
Real-Time Dynamic Model Updating of a Hysteretic Structural System
(American Society of Civil Engineers, 2014)Linear model updating techniques have been successfully applied in structural health monitoring (SHM) for assessing structural conditions. However, civil structures generally exhibit nonlinear hysteretic behavior under ... -
Plastic Hinge Rotation Capacity of Reinforced HPFRCC Beams
(American Society of Civil Engineers, 2015)High performance fiber reinforced cementitious composite (HPFRCC) materials exhibit strain hardening behavior under tensile loading. This strain hardening response occurs after the first cracking of the material. In this ... -
Extending the Direct Strength Method for Cold-Formed Steel Design to Through-Fastened Simple Span Girts and Purlins with Laterally Unbraced Compression Flanges
(American Society of Civil Engineers, 2014)A direct-strength method (DSM) prediction approach is introduced and validated for metal building wall and roof systems that are constructed with steel panels through-fastened with screws to girts or purlins. The focus is ... -
Splitting Failure of Reinforced Concrete Columns
(American Society of Civil Engineers, 2014)Many earthquake reconnaissance studies have revealed a unique splitting failure mode of reinforced concrete (RC) columns that has yet to be fully elucidated. Most available shear strength models in the current codes are ... -
Ground Motion Duration Effects on Hysteretic Behavior of Reinforced Concrete Bridge Columns
(American Society of Civil Engineers, 2014)This study examined seismic behavior under long-duration ground motion in flexural-dominated reinforced concrete bridge columns designed per modern seismic design codes. Two column specimens with identical design parameters ...