Journal of Structural Engineering: Recent submissions
Now showing items 3921-3940 of 10765
-
Tall Buildings and Damping: A Concept-Based Data-Driven Model
(American Society of Civil Engineers, 2014)Modern tall buildings are characterized by their slenderness and sensitivity to resonant wind effects. This is especially true considering the acceleration-based motion perception criteria under which they must be designed. ... -
Time-Response Analysis of Arching Unreinforced Concrete Block Walls Subjected to Blast Loads
(American Society of Civil Engineers, 2014)The new ASCE59-11 standards currently limit the use of unreinforced masonry (URM) walls in blast-resistant construction, regardless of the wall boundary conditions. This is attributable in part to the lack of experimental ... -
Computational Simulation of Gravity-Induced Progressive Collapse of Steel-Frame Buildings: Current Trends and Future Research Needs
(American Society of Civil Engineers, 2014) -
Estimation of Hurricane Wind Speed Probabilities: Application to New York City and Other Coastal Locations
(American Society of Civil Engineers, 2014)A procedure is presented for estimating parametric probabilistic models of hurricane wind speeds from existing information on state-of-the-art estimates of wind speeds with various mean recurrence intervals (MRIs). Such ... -
Seismic Performance Quantification of Reinforced Masonry Structural Walls with Boundary Elements
(American Society of Civil Engineers, 2014)The design of reinforced masonry (RM) structural walls subject to high inelastic curvature demands can often be hindered by prescriptive requirements in design codes regarding the ratio between compression zone depth ( -
Analytical Model for Predicting Response and Flexure-Shear Resistance of Composite Beams Combining Reinforced Ultrahigh Performance Fiber-Reinforced Concrete and Reinforced Concrete
(American Society of Civil Engineers, 2014)The addition of an external layer of reinforced ultrahigh performance fiber-reinforced concrete (R-UHPFRC) on top of reinforced concrete (RC) floor slabs and bridge decks is an emerging technique for strengthening RC ... -
Displacement-Based Design of Buildings with Torsion: Theory and Verification
(American Society of Civil Engineers, 2014)Direct displacement design (DDD) is a procedure that allows one to distribute the forces induced by an earthquake to the levels of a multistory building to ensure that the desired level of interstory drift is not exceeded. ... -
Optimum Level of Shear Wall Curtailment in Wall-Frame Buildings: The Continuum Model Revisited
(American Society of Civil Engineers, 2014)The continuum model constitutes a simple and efficient tool to analyze high-rise wall-frame buildings. It has been commonly used in recent decades to analyze the behavior of these structures. The related equations are ... -
Repair of Fire-Exposed Preloaded Rectangular Concrete Columns by Postcompressed Steel Plates
(American Society of Civil Engineers, 2014)This paper describes an experimental study of axially loaded, fire-exposed, rectangular RC columns repaired with postcompressed steel plates. Seven RC columns with identical section dimensions and reinforcement details ... -
Sustainable Design of Reinforced Concrete Structures through CO2 Emission Optimization
(American Society of Civil Engineers, 2015)Efforts are being made to achieve more efficient operation of buildings, with the goal of reducing the construction industry’s contribution to energy consumption and greenhouse gas emissions. That contribution also includes ... -
Plastic Hinge Model and Displacement-Based Seismic Design Parameter Quantifications for Reinforced Concrete Block Structural Walls
(American Society of Civil Engineers, 2014)A practical alternative to the traditional rectangular cross sections of reinforced masonry structural wall systems is to alter the wall ends to allow for smaller compression zone depths, and thus higher curvatures to ... -
Flexural and Shear Resistance of Steel Fiber–Reinforced Lightweight Concrete Beams
(American Society of Civil Engineers, 2014)In the present paper an analytical model is proposed that is able to determine the shear resistance of lightweight reinforced concrete beams with longitudinal bars, in the presence of reinforcing steel fibers. The model ... -
Special Detailing Techniques to Improve Structural Resistance against Progressive Collapse
(American Society of Civil Engineers, 2014)Previous research work has found that catenary action can significantly increase structural resistance in addition to flexural capacity under column removal scenarios. However, whether reinforcements in beams can effectively ... -
Retrofit Options for Light-Frame Wood Stud Walls Subjected to Blast Loading
(American Society of Civil Engineers, 2014)This paper presents the results of an experimental program, where a total of eight retrofitted walls were subjected to blast loading, simulated by shock waves using the University of Ottawa’s shock tube. Four different ... -
Seismic Response of Midrise Light Wood-Frame Buildings with Portal Frames
(American Society of Civil Engineers, 2014)The seismic response of midrise light wood-frame buildings incorporating portal frames and shear walls were investigated via numerical simulation. Because portal frames and shear walls exhibit different ductility ... -
Efficient Procedure for Selecting and Scaling Ground Motions for Response History Analysis
(American Society of Civil Engineers, 2014)Linear and nonlinear response history analyses (RHA) are often conducted for predicting the seismic demand and capacity of structures. The proper selection of ground motions is critical to obtaining reliable results from ... -
Semiactive Friction Damper for Lightweight Pedestrian Bridges
(American Society of Civil Engineers, 2014)In many cases, structural damping of lightweight structures is quite low. Therefore, additional damping systems have to be applied. These systems are, in most instances, passive ones. Concerning lightweight structures, ... -
Eccentric Axial Load Capacity of High-Strength Steel-Concrete Composite Columns of Various Sectional Shapes
(American Society of Civil Engineers, 2014)Two concrete-filled steel tube columns and four concrete-encased steel columns using high-strength steel (yield strength -
Performance Evaluation of Portal Frame System in Low-Rise Light-Frame Wood Structures
(American Society of Civil Engineers, 2014)In this paper, results are presented from a testing program focused on evaluating the performance of portal frame systems. A total of nine full-scale portal frame assemblies with six different configurations were tested ... -
Seismic Retrofit of Steel Moment-Resisting Frames with High-Performance Fiber-Reinforced Concrete Infill Panels: Large-Scale Hybrid Simulation Experiments
(American Society of Civil Engineers, 2014)Recent earthquakes around the world have demonstrated that steel moment-frame buildings designed based on older seismic provisions are seismically deficient. To enhance the seismic performance of these buildings, a new ...