Journal of Structural Engineering: Recent submissions
Now showing items 3901-3920 of 10765
-
Simulation of Seismic Collapse in Nonductile Reinforced Concrete Frame Buildings with Masonry Infills
(American Society of Civil Engineers, 2014)Improved analysis methods and guidelines are presented to simulate the seismic collapse of nonductile concrete frame buildings with masonry infills. The analysis tools include an inelastic dual-strut model that captures ... -
Weak-Axis Behavior of Wide Flange Columns Subjected to Blast
(American Society of Civil Engineers, 2014)Much of past research in the civilian area on the response of civil structures to explosive loading has focused on large detonations in the far field that result in relatively uniform pressure distribution over the structure ... -
Using a Lumped Mass, Nonuniform Stiffness Beam Model to Obtain the Interstory Drift Spectra
(American Society of Civil Engineers, 2014)The drift spectrum has recently been introduced as a new measure for estimating the interstory drift demands in buildings under near-field earthquakes. In this study, a method for estimating the drift demands in buildings ... -
Two Near-Optimal Layouts for Trusslike Bridge Structures Bearing Uniform Weight between Supports
(American Society of Civil Engineers, 2014)Although the primary objective on designing a structure is to support the external loads, the achievement of an optimal layout that reduces all costs associated with the structure is an aspect of increasing interest. The ... -
Finite-Element Parametric Study of Bond and Splitting Stresses in Reinforced Concrete Tie Members
(American Society of Civil Engineers, 2014)A nonlinear finite element (FE) technique is used to study the bond mechanism at the steel/concrete interface in reinforced concrete (RC) tie members. The accuracy of three different FE bond models, namely, the perfect ... -
Local Buckling Restraining Behavior of Thin-Walled Circular CFT Columns under Seismic Loads
(American Society of Civil Engineers, 2014)The local buckling restraining behavior of thin-walled circular concrete-filled tubular (CFT) columns is examined under seismic loads by conducting a bidirectional cyclic loading and a bidirectional shaking table test. ... -
Three-Dimensional Modeling of Long-Term Structural Behavior of Wood-Concrete Composite Beams
(American Society of Civil Engineers, 2014)This paper presents a three-dimensional (3D) numerical model for capturing the time-dependent behavior of layered wood-concrete composite beams with notched shear key interlayer connections, subject to long-term static ... -
Cast Steel Yielding Brace System for Concentrically Braced Frames: Concept Development and Experimental Validations
(American Society of Civil Engineers, 2014)The Yielding Brace System is a highly ductile bracing system in which seismic energy is dissipated by the yielding fingers of a specially engineered cast steel connector. When the brace is severely loaded in tension and ... -
Quantitative Insight into Rational Tornado Design Wind Speeds for Residential Wood-Frame Structures Using Fragility Approach
(American Society of Civil Engineers, 2014)Tornadoes are an extremely devastating natural hazard that have significant consequences but are currently not considered in the structural design codes due to their low probability of occurrence. These low-occurrence ... -
Monotonic Loading Tests of Ring-Beam Connections for Steel Reinforced Concrete Columns and RC Beams
(American Society of Civil Engineers, 2014)Many types of connections between steel reinforced concrete (SRC) columns and reinforced concrete (RC) beams have been proposed. These connections are usually difficult to design and complex to construct. This study proposes ... -
Disturbed Stress Field Model for Unreinforced Masonry
(American Society of Civil Engineers, 2014)The traditional smeared crack macromodels for the analysis of masonry structures consider masonry as a homogeneous material with the effects of mortar joints included in an average sense. This approach, suitable for the ... -
Hybrid Simulation of Bridge Response to Three-Dimensional Earthquake Excitation Followed by Truck Load
(American Society of Civil Engineers, 2014)A hybrid simulation approach is used to evaluate the traffic performance of a typical California highway overpass bridge after a major earthquake. The prototype bridge used in this study is a five-span single-column-bent ... -
Effect of Ground Motion Sequence on Response of Squat Reinforced Concrete Shear Walls
(American Society of Civil Engineers, 2014)Most industrial and nuclear facilities rely on reinforced concrete structural walls as their primary seismic lateral-force-resisting components. In nuclear facility structures, squat walls commonly have an aspect ratio ... -
Shear Behavior of Ultrahigh Performance Fiber-Reinforced Concrete Beams. II: Analysis and Design Provisions
(American Society of Civil Engineers, 2014)The safety margin of shear design provisions for ultrahigh performance fiber reinforced concrete (UHPFRC) requires quantification prior to widespread use. To this aim, the results of a dedicated experimental campaign ... -
Shear Behavior of Ultrahigh Performance Fiber-Reinforced Concrete Beams. I: Experimental Investigation
(American Society of Civil Engineers, 2014)To quantify the safety margin of shear design provisions for ultrahigh performance fiber-reinforced concrete (UHPFRC), an experimental campaign has been performed. In a four-point bending configuration, shear tests have ... -
Design of Locally Slender Structural Steel Columns
(American Society of Civil Engineers, 2014)The primary objective of this paper is to evaluate and compare design methods for locally slender steel columns. Three design methods utilized for such columns in the United States are explored: (1) the Q-factor method; ... -
Cyclic Behavior of Nonconforming Full-Scale RC Columns
(American Society of Civil Engineers, 2014)Capacity models to assess structural safety are primarily based on experimental outcomes typical of new constructions. In order to analyze deformation and strength mechanisms of members that do not comply to current seismic ... -
Flexural Test for Steel-Concrete Composite Members Using Prefabricated Steel Angles
(American Society of Civil Engineers, 2014)In the proposed composite [prefabricated steel-reinforced concrete (PSRC)] column, steel angles located at the corners of the cross section are weld connected with tie bars to provide a bond for the steel angles, shear ... -
Seismic Laboratory Testing of Energy-Efficient, Staggered-Stud, Wood-Frame Shear Walls
(American Society of Civil Engineers, 2015)Residential energy use is a significant contributor to greenhouse gas emissions and climate change. Reducing energy efficiency in conventional wood-framed houses are thermal bridges: direct paths that allow heat to flow ... -
Collision-Free Path Planning of Tensegrity Structures
(American Society of Civil Engineers, 2014)Path planning is a crucial step in shape control of tensegrity structures. A mathematical model for the path planning problem of tensegrities is proposed. Both external collision and internal collision are considered. A ...