Journal of Structural Engineering: Recent submissions
Now showing items 3981-4000 of 10765
-
System Reliability Updating of Fatigue-Induced Sequential Failures
(American Society of Civil Engineers, 2014)Many structural systems are subjected to the risk of fatigue-induced failures caused by repeated loading during their service. For effective management of such risk, it is essential to estimate the reliability of a structure ... -
Cyclic Response of Nonductile Reinforced Concrete Frames with Unreinforced Masonry Infills Retrofitted with Engineered Cementitious Composites
(American Society of Civil Engineers, 2014)A new seismic retrofit technique for unreinforced masonry infills in nonductile reinforced concrete frames is presented. The objective was to develop a light and easy to apply retrofit technique for the infills that both ... -
Time-Varying Linear and Nonlinear Structural Identification with Analytical Mode Decomposition and Hilbert Transform
(American Society of Civil Engineers, 2013)Analytical mode decomposition (AMD) of a time series concerning any preselected bisecting frequency with Hilbert transform has been developed for closely spaced multicomponent signal decomposition. For this class of ... -
Simulated Bilinear-Elastic Behavior in a SDOF Elastic Structure Using Negative Stiffness Device: Experimental and Analytical Study
(American Society of Civil Engineers, 2014)The acceleration and base shear of structures during strong ground motion can be attenuated by achieving bilinear-elastic behavior without any permanent displacement—also referred to as “apparent weakening.” The negative ... -
Damage Identification of Bolt Connections in a Steel Frame
(American Society of Civil Engineers, 2014)It is well-known that damage in a structure is a local phenomenon. Based on measured vibration data from sensors, the detection of a local structural damage requires the finite-element formulation for the equations of ... -
Novel Composite Beam Element with Bond-Slip for Nonlinear Finite-Element Analyses of Steel/FRP-Reinforced Concrete Beams
(American Society of Civil Engineers, 2013)A new one-dimensional two-node layered composite beam element that accounts for the bond-slip between reinforcing bars and surrounding concrete is presented for nonlinear analysis of steel/fiber-reinforced polymer (FRP) ... -
Mechanics of an Adhesive Anchor System Subjected to a Pullout Load. II: Viscoelastic Analysis
(American Society of Civil Engineers, 2014)An analytical viscoelastic model is proposed to predict the time-dependent displacement of adhesive anchoring systems under axial tension. Using the correspondence principle, the elastic solution in Paper I has been extended ... -
Wind Loads on Low-Profile, Tilted, Solar Arrays Placed on Large, Flat, Low-Rise Building Roofs
(American Society of Civil Engineers, 2014)The author examined wind loads on low-profile, roof-mounted solar arrays, placed on large, low-rise buildings with nearly flat roofs by using scale models in a boundary layer wind tunnel. The author also examined the effects ... -
External Posttensioning of Reinforced Concrete Beams Using a V-Shaped Steel Rod System
(American Society of Civil Engineers, 2014)This study presents the development of an analysis method to predict the moments at first yielding and at ultimate strength of reinforced concrete beams strengthened using a V-shaped posttensioning steel rod system. The ... -
Laminated Glass Members in Compression: Experiments and Modeling
(American Society of Civil Engineers, 2014)It is well known that structural glass members are made by assembling thin laminated panels, which can be connected with different bonding techniques; for instance, with steel devices or with structural adhesives. The ... -
Generalized Component-Based Model for Shear Tab Connections
(American Society of Civil Engineers, 2014)The behavior of a conventional steel single-plate (shear tab) connection is highly dependent on the type of loading to which it is subjected. Although these connections have been studied primarily under shear loading, ... -
Experimental Studies and Models for Ductile Fracture in ASTM A992 Steels at High Triaxiality
(American Society of Civil Engineers, 2014)This study presents the results of experimental investigation and models for ductile fracture in the ASTM A992 structural steels subjected to high stress triaxiality. To this end, uniaxial tension tests on the notched ... -
Mechanics of an Adhesive Anchor System Subjected to a Pullout Load. I: Elastic Analysis
(American Society of Civil Engineers, 2014)An elastic solution is developed for an anchor embedded in a concrete hole and bonded to the concrete through an adhesive layer that is not necessarily thin. Both bonded and debonded conditions are considered for the ... -
In-Plane Orthotropic Behavior of Timber Floor Diaphragms in Unreinforced Masonry Buildings
(American Society of Civil Engineers, 2014)A full-scale experimental program consisting of testing four as-built diaphragms and four retrofitted diaphragms in both principal loading directions is presented. As-built configurations were typical of those found in ... -
Evaluation of Mean Recurrence Intervals of Wind Effects for Tall Building Design
(American Society of Civil Engineers, 2014)Mean recurrence intervals (MRIs) of wind effects for the strength design (SD) of flexible buildings by the wind-tunnel method are based on estimates of total uncertainties that do not account for uncertainties in the dynamic ... -
Experimental Testing of CFRP-Strengthened Reinforced Concrete Slab Elements Loaded by Close-In Blast
(American Society of Civil Engineers, 2014)Strengthening reinforced concrete slab or wall structural elements with carbon fiber-reinforced polymer (CFRP) can improve their blast resistance. However, close-in blasts (blasts with a scaled range of less than -
Special Issue on Cold-Formed Steel Structures
(American Society of Civil Engineers, 2013) -
General Mesh Configuration Design Approach for Large Cable-Network Antenna Reflectors
(American Society of Civil Engineers, 2014)A well-designed mesh configuration is of great importance to the performance of large cable-network antenna reflectors. The motivation of this study is to find a general approach for designing appropriate mesh configurations ... -
Experimental Investigation of Concrete Frames Infilled with rc for Seismic Rehabilitation
(American Society of Civil Engineers, 2014)New reinforced concrete (RC) walls are popular in seismic rehabilitation of RC buildings as they reduce seismic-deformation demands. Their effectiveness was experimentally investigated by pseudodynamically testing -
Fiber Beam-Column Model Considering Slab Spatial Composite Effect for Nonlinear Analysis of Composite Frame Systems
(American Society of Civil Engineers, 2014)A fiber beam-column model considering the slab spatial composite effect for nonlinear analysis of composite frame systems is proposed and implemented in a general commercial finite element (FE) package. A conventional fiber ...