Journal of Structural Engineering: Recent submissions
Now showing items 4001-4020 of 10765
-
Braced Ductile Shear Panel: New Seismic-Resistant Framing System
(American Society of Civil Engineers, 2014)The conceptual design of an innovative seismic-resistant steel framing system capable of providing stiffness and ductility to new or existing structures is presented. The bracing system consists of concentric X-braces ... -
Optimization of Life-Cycle Maintenance of Deteriorating Bridges with Respect to Expected Annual System Failure Rate and Expected Cumulative Cost
(American Society of Civil Engineers, 2014)Civil infrastructure systems are subjected to progressive deterioration resulting from multiple mechanical and environmental stressors. This deterioration process is developed under uncertainties related to load effects, ... -
Real-Time Hybrid Simulation of a Nonductile Reinforced Concrete Frame
(American Society of Civil Engineers, 2014)This paper reports about a real-time hybrid simulation (RTHS) of a nonductile reinforced concrete frame that had previously been tested on a shake table (ST) at the University of California, Berkeley. This three-story, ... -
Material Model Incorporating Buckling of Reinforcing Bars in RC Columns
(American Society of Civil Engineers, 2014)An efficient material model was developed for reinforcing steel in reinforced concrete (RC) columns that implicitly incorporates the degrading effects of bar-buckling. Utilizing the beam-on-springs model developed by the ... -
Hazard-Based Optimum Lifetime Inspection and Repair Planning for Deteriorating Structures
(American Society of Civil Engineers, 2013)The hazard function is one of the most used lifetime distribution functions in reliability analysis of components and systems. Although it is extensively used in several scientific disciplines, few applications have been ... -
Fire Resistance of Concrete Slabs in Punching Shear
(American Society of Civil Engineers, 2014)Twelve specimens of reinforced concrete slab-column connections were tested to investigate fire resistance of punching shear. Half of the specimens were tested at room temperature to determine punching shear strength. Half ... -
Identification of the Controlling Mechanism for Predicting Critical Loads in Elastomeric Bearings
(American Society of Civil Engineers, 2013)Assessing the stability of individual isolators is an important consideration for the design of seismic isolation systems composed of elastomeric bearings. A key component for the stability assessment is the prediction of ... -
Seismic Fragility Evaluation with Incomplete Structural Appraisal Data: An Iterative Statistical Approach
(American Society of Civil Engineers, 2014)This paper presents an iterative statistical approach to evaluating seismic structural safety using incomplete appraisal data. Despite the continuous improvement to traditional structural assessment procedures and the ... -
Structural Performance of Glued Laminated Bamboo Beams
(American Society of Civil Engineers, 2014)This paper presents a study aimed to characterize the structural performance of laminated bamboo lumber (LBL) and bamboo glulam beams (BGBs) as a first step to evaluate their potential application as a structural material. ... -
Wind Design Practice and Recommendations for Solar Arrays on Low-Slope Roofs
(American Society of Civil Engineers, 2014)Currently, ASCE standards do not provide specific guidance on wind loads for solar arrays of photovoltaic panels, in terms of either prescriptive design or requirements for wind tunnel testing. Guidance is needed, particularly ... -
Behavior of Composite Beam-Column Joints in a Middle-Column-Removal Scenario: Experimental Tests
(American Society of Civil Engineers, 2014)A series of experiments has been conducted to investigate the failure modes and ductility of composite beam-column joints in a middle-column-removal scenario. Composite web cleat and flush end plate connections were studied. ... -
After-Fracture Reserve Strength of Two Four-Chord Aluminum Sign Trusses
(American Society of Civil Engineers, 2014)Many departments of transportation use four-chord aluminum tubular truss structures to support dynamic message signs (DMS). Inspections have often revealed that these structures contain cracks that likely occurred during ... -
Probabilistic Nonlinear Response Analysis of Steel-Concrete Composite Beams
(American Society of Civil Engineers, 2014)This paper employs a methodology for probabilistic response analysis based on the first-order second moment (FOSM) method in conjunction with response sensitivity computation through the direct differentiation method (DDM), ... -
Mechanical Performance of Steel-Concrete Composite Beams Subjected to a Hogging Moment
(American Society of Civil Engineers, 2014)Limited experimental results have been reported in the literature on the fatigue and ultimate static loading behavior of composite beams subjected to negative bending moment. This paper examines experimentally the behavior ... -
Structural Behavior of Shear-Critical RC Slender Beams with Corroded Properly Anchored Longitudinal Steel Reinforcement
(American Society of Civil Engineers, 2013)The effect of corrosion of properly anchored longitudinal reinforcement on the structural behavior of shear-critical RC slender beams was experimentally investigated. A total of 10 medium-scale reinforced concrete beams ... -
Enhanced Smooth Hysteretic Model with Degrading Properties
(American Society of Civil Engineers, 2014)The elastic and inelastic nonlinear behavior of structural members use constitutive relations in which restoring forces and deformations are not proportional and often follow different paths in loading and unloading using ... -
Performance of Pendulum Tuned Mass Dampers in Reducing the Responses of Flexible Structures
(American Society of Civil Engineers, 2013)The primary objective of this paper is to study the dynamic responses of a flexible multiple degree-of-freedom structure coupled with the three-dimensional motions of a nonlinear pendulum tuned mass damper (PTMD). The ... -
Shear Resistance Mechanism of Posttensioned Precast Concrete Members
(American Society of Civil Engineers, 2013)An analytical model to investigate the shear resistance mechanism of a posttensioned precast concrete (PPC) member is proposed. The model is based on the truss mechanism. The compatibility of strains and the equilibrium ... -
Damage Identification in Reinforced Concrete Beams Using Spatially Distributed Strain Measurements
(American Society of Civil Engineers, 2013)Brillouin optical time domain reflectometry or analysis (BOTDR/A) is one of the strain measurement technologies that is suitable for smart monitoring of civil engineering infrastructures. Although the technology has the ... -
Static Strength of Axially Loaded Elliptical Hollow Section X Joints with Braces Welded to Wide Sides of Chord. II: Parametric Study and Strength Equations
(American Society of Civil Engineers, 2014)A research program consisting of experimental tests and finite-element (FE) analyses has been carried out to study the behavior and static strength of axially loaded elliptical hollow section (EHS) X joints of two ...