| description abstract | The fatigue characteristics of microelectromechanical systems (MEMS) material, such as silicon or polysilicon, have become very important. Many studies have focused on this topic, but none have defined a good methodology for extracting the applied stress and predicting fatigue life accurately. In this study, a methodology was developed for the life prediction of a polysilicon microstructure under bending tests. Based on the fatigue experiments conducted by Hocheng et al. (2008, “Various Fatigue Testing of Polycrystalline Silicon Microcantilever Beam in Bending,” Jpn. J. Appl. Phys., 47, pp. 5256–5261) and (Hung and Hocheng, 2012, “Frequency Effects and Life Prediction of Polysilicon Microcantilever Beams in Bending Fatigue,” J. Micro/Nanolithogr., MEMS MOEMS, 11, p. 021206), cantilever beams with different dimensions were remodeled with mesh control technology using finite element analysis (FEA) software to extract the stress magnitude. The mesh size, anchor boundary, loading boundary, critical stress definition, and solution type were well modified to obtain more correct stress values. Based on the new stress data extracted from the modified models, the optimized stress-number of life curve (S–N curve) was obtained, and the new life-prediction equation was found to be referable for polysilicon thin film life prediction under bending loads. After comparing the literature and confirming the new models, the frequency effect was observed only for the force control type and not for the displacement control type. | |
