| contributor author | Aizawa, T. | |
| contributor author | Suga, H. | |
| contributor author | Nagata, T. | |
| contributor author | Yamaguchi, T. | |
| date accessioned | 2017-11-25T07:18:37Z | |
| date available | 2017-11-25T07:18:37Z | |
| date copyright | 2017/23/3 | |
| date issued | 2017 | |
| identifier issn | 2166-0468 | |
| identifier other | jmnm_005_02_021004.pdf | |
| identifier uri | http://138.201.223.254:8080/yetl1/handle/yetl/4235279 | |
| description abstract | The initial microdot and microline patterns were first ink-jet printed onto the surface of polished AISI420 stainless steel mold. This masked mold substrate was nitrided at 693 K for 7.2 ks at 70 Pa by using the high-density plasma nitriding system. The unmasked parts were selectively nitrided to have higher hardness than 1200 HV. This hardness-profiled substrate was mechanically sand-blasted to fabricate the microtextured mold. Microdisk patterned plastic cover-case for cellular phones were injection-molded by using this method for practical demonstration. Both the selective hardening and anisotropic inner nitriding processes were experimentally discussed as a key step in the present processing. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Microtexturing Into AISI-SUS420 Molds for Injection Molding Via Plasma Nitriding | |
| type | Journal Paper | |
| journal volume | 5 | |
| journal issue | 2 | |
| journal title | Journal of Micro and Nano-Manufacturing | |
| identifier doi | 10.1115/1.4035953 | |
| journal fristpage | 21004 | |
| journal lastpage | 021004-8 | |
| tree | Journal of Micro and Nano-Manufacturing:;2017:;volume( 005 ):;issue: 002 | |
| contenttype | Fulltext | |