contributor author | Wu, Yuan | |
contributor author | Lee, Chin C. | |
date accessioned | 2017-05-09T01:06:45Z | |
date available | 2017-05-09T01:06:45Z | |
date issued | 2014 | |
identifier issn | 1528-9044 | |
identifier other | ep_136_01_011006.pdf | |
identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/154447 | |
description abstract | Two copper (Cu) substrates were bonded using silver (Ag) and indium (In) and annealed at 200–250 آ°C to convert the joints into the solid solution (Ag) for enhanced strength and ductility. Cu–Cu pair was chosen so that the samples break in the joint during shear test. The upper Cu was electroplated with 15 خ¼m Ag. The lower Cu was plated with 15 خ¼m Ag, followed by In and 0.1 خ¼m Ag to inhibit indium oxidation. Two designs were implemented, using 8 خ¼m and 5 خ¼m In, respectively. The Cu substrates were bonded at 180 آ°C in 100 mTorr vacuum without flux. Afterwards, samples were annealed at 200 آ°C for 1000 h (first design) and at 250 آ°C for 350 h (second design), respectively. Scanning electron microscope with energy dispersive Xray analysis (SEM and EDX) results indicate that the joint of the first design is an alloy of mostly (Ag) with micronsize Ag2In and (خ¶) regions, and that of second design has converted to a single (Ag) phase. Shear test results show that the samples are very strong. The breaking forces far exceed requirements in MILSTD883 H standards. Fracture incurs inside the joint and is a mix of brittle and ductile modes or only ductile mode. The joint solidus temperatures are 600 آ°C and 900 آ°C for the first and second designs, respectively. | |
publisher | The American Society of Mechanical Engineers (ASME) | |
title | The Strength of High Temperature Ag–In Joints Produced Between Copper by Fluxless Low Temperature Processes | |
type | Journal Paper | |
journal volume | 136 | |
journal issue | 1 | |
journal title | Journal of Electronic Packaging | |
identifier doi | 10.1115/1.4026171 | |
journal fristpage | 11006 | |
journal lastpage | 11006 | |
identifier eissn | 1043-7398 | |
tree | Journal of Electronic Packaging:;2014:;volume( 136 ):;issue: 001 | |
contenttype | Fulltext | |