Two Phase Liquid Cooling for Thermal Management of IGBT Power Electronic ModuleSource: Journal of Electronic Packaging:;2013:;volume( 135 ):;issue: 002::page 21001DOI: 10.1115/1.4023215Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Recent trends including rapid increases in the power ratings and continued miniaturization of semiconductor devices have pushed the heat dissipation of power electronics well beyond the range of conventional thermal management solutions, making control of device temperature a critical issue in the thermal packaging of power electronics. Although evaporative cooling is capable of removing very high heat fluxes, twophase cold plates have received little attention for cooling power electronics modules. In this work, devicelevel analytical modeling and systemlevel thermal simulation are used to examine and compare singlephase and twophase cold plates for a specified inverter module, consisting of 12 pairs of silicon insulated gate bipolar transistor (IGBT) devices and diodes. For the conditions studied, an R134acooled, twophase cold plate is found to substantially reduce the maximum IGBT temperature and spatial temperature variation, as well as reduce the pumping power and flow rate, in comparison to a conventional singlephase watercooled cold plate. These results suggest that twophase cold plates can be used to substantially improve the performance, reliability, and conversion efficiency of power electronics systems.
|
Collections
Show full item record
contributor author | Wang, Peng | |
contributor author | McCluskey, Patrick | |
contributor author | Bar | |
date accessioned | 2017-05-09T00:57:38Z | |
date available | 2017-05-09T00:57:38Z | |
date issued | 2013 | |
identifier issn | 1528-9044 | |
identifier other | ep_135_2_021001.pdf | |
identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/151408 | |
description abstract | Recent trends including rapid increases in the power ratings and continued miniaturization of semiconductor devices have pushed the heat dissipation of power electronics well beyond the range of conventional thermal management solutions, making control of device temperature a critical issue in the thermal packaging of power electronics. Although evaporative cooling is capable of removing very high heat fluxes, twophase cold plates have received little attention for cooling power electronics modules. In this work, devicelevel analytical modeling and systemlevel thermal simulation are used to examine and compare singlephase and twophase cold plates for a specified inverter module, consisting of 12 pairs of silicon insulated gate bipolar transistor (IGBT) devices and diodes. For the conditions studied, an R134acooled, twophase cold plate is found to substantially reduce the maximum IGBT temperature and spatial temperature variation, as well as reduce the pumping power and flow rate, in comparison to a conventional singlephase watercooled cold plate. These results suggest that twophase cold plates can be used to substantially improve the performance, reliability, and conversion efficiency of power electronics systems. | |
publisher | The American Society of Mechanical Engineers (ASME) | |
title | Two Phase Liquid Cooling for Thermal Management of IGBT Power Electronic Module | |
type | Journal Paper | |
journal volume | 135 | |
journal issue | 2 | |
journal title | Journal of Electronic Packaging | |
identifier doi | 10.1115/1.4023215 | |
journal fristpage | 21001 | |
journal lastpage | 21001 | |
identifier eissn | 1043-7398 | |
tree | Journal of Electronic Packaging:;2013:;volume( 135 ):;issue: 002 | |
contenttype | Fulltext |