| contributor author | Mahidhar Rayasam | |
| contributor author | Ganesh Subbarayan | |
| date accessioned | 2017-05-09T00:19:35Z | |
| date available | 2017-05-09T00:19:35Z | |
| date copyright | September, 2006 | |
| date issued | 2006 | |
| identifier issn | 1528-9044 | |
| identifier other | JEPAE4-26264#291_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/133533 | |
| description abstract | In this technical brief, we describe a simple, yet versatile solder shape prediction model that can handle inclination (as is likely to occur when warped substrates are used) and misalignment of the top pad of the solder joint relative to the bottom pad. The developed model is general in nature and is demonstrated on a solder joint with circular top and bottom pads and on a stud joint where the interconnection is to a stud on which the wetted area is to be determined through simulation. The model was able to accurately predict the solder profiles from literature with an error of ±5%. A program written within the MATHEMATICA ® environment was developed and used for the above simulations. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | A Three-Dimensional Solder Shape Model Incorporating Top Pad Inclination and Misalignment | |
| type | Journal Paper | |
| journal volume | 128 | |
| journal issue | 3 | |
| journal title | Journal of Electronic Packaging | |
| identifier doi | 10.1115/1.2229232 | |
| journal fristpage | 291 | |
| journal lastpage | 293 | |
| identifier eissn | 1043-7398 | |
| keywords | Solders | |
| keywords | Shapes AND Solder joints | |
| tree | Journal of Electronic Packaging:;2006:;volume( 128 ):;issue: 003 | |
| contenttype | Fulltext | |