Effects of Substrate Conductivity on Convective Cooling of Electronic Components

Abstract

The coupled conduction and forced convection transport from substrate-mounted modules in a channel is numerically investigated to identify the effects of the substrate conductivity. The results presented apply to air and two-dimensional laminar flow conditions. It was found that recirculating cells as well as streamwise conduction through the substrate play an important role in predicting convective heat transfer from the printed circuit board (PCB) and modules and in determining the temperature distributions in the PCB, modules, and fluid. The dimensionless temperature and the local Nusselt number along the interface between the fluid and the module or PCB are rather complicated, and therefore, predetermined simple boundary conditions along the solid surface may be inappropriate in many conjugate heat transfer problems. In general, the results show that the maximum temperature within heat sources can be greatly reduced by increasing the conductivity of the PCB. The effectiveness of the use of highly conductive materials for PCB, however, depends on the distance between the heat generating modules on the PCB. In addition, finite thermal resistance between the module and the PCB would serve to diminish the PCB conduction effects, thereby reducing the effectiveness of the enhancement afforded by increased conductivity.