| contributor author | A. I. Attarwala | |
| contributor author | G. Dody | |
| contributor author | J. K. Tien | |
| contributor author | G. Y. Masada | |
| date accessioned | 2017-05-08T23:38:07Z | |
| date available | 2017-05-08T23:38:07Z | |
| date copyright | June, 1992 | |
| date issued | 1992 | |
| identifier issn | 1528-9044 | |
| identifier other | JEPAE4-26129#109_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/110062 | |
| description abstract | Solder joints of leadless surface mounted components, which were thermally cycled, were studied to determine their failure mode and to compare the results with work done on bulk solder specimens. Previous studies done on the characterization of the mechanical properties of cyclically tested bulk Pb/Sn solder of different compositions show that their deformation behavior is a result of an interaction between creep and fatigue damage processes. Fractographic forensics of the failed solder joints also showed damage due to both creep and fatigue processes. Fatigue striations were observed side by side with creep voids and extensive intergranular cracking. The crack growth rate (da/dn) was calculated to be around 0.25 μm/cycle. It is also established that the failure is crack propagation controlled. It was found that the crack initiation site on at least one of the joints was a tin rich area. The size of the voids varied from 0.1 μm to 0.5 μm. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Confirmation of Creep and Fatigue Damage in Pb/Sn Solder Joints | |
| type | Journal Paper | |
| journal volume | 114 | |
| journal issue | 2 | |
| journal title | Journal of Electronic Packaging | |
| identifier doi | 10.1115/1.2906405 | |
| journal fristpage | 109 | |
| journal lastpage | 111 | |
| identifier eissn | 1043-7398 | |
| keywords | Creep | |
| keywords | Fatigue damage | |
| keywords | Solder joints | |
| keywords | Failure | |
| keywords | Fatigue | |
| keywords | Solders | |
| keywords | Fracture (Materials) | |
| keywords | Mechanical properties | |
| keywords | Fracture (Process) | |
| keywords | Crack propagation | |
| keywords | Cycles AND Deformation | |
| tree | Journal of Electronic Packaging:;1992:;volume( 114 ):;issue: 002 | |
| contenttype | Fulltext | |