Journal of Engineering Materials and Technology: Recent submissions
Now showing items 2781-2800 of 3257
-
The Mechanics of Fracture and Fatigue — An Introduction
(The American Society of Mechanical Engineers (ASME), 1982) -
Hydrogen-Induced Crack Propagation in a QT-Steel Weldment
(The American Society of Mechanical Engineers (ASME), 1982)A hydrogen-induced fracture process in the HAZ of a QT-steel weldment is studied numerically. Two-dimensional models are used to estimate the transient distributions of stress and hydrogen during ... -
Effect of Stress Frequency on Fatigue Crack Propagation in Titanium
(The American Society of Mechanical Engineers (ASME), 1982)The effect of stress frequency on the fatigue crack propagation rate in 99.5 percent pure titanium, which has a strong strain rate dependency in the plastic region, was studied. Fatigue crack ... -
Editorial
(The American Society of Mechanical Engineers (ASME), 1981) -
Fracture Mechanics (SIAM-AMS Proceedings, Volume XII)
(The American Society of Mechanical Engineers (ASME), 1981) -
Engineering Plasticity by Mathematical Programming
(The American Society of Mechanical Engineers (ASME), 1981) -
Glass Reinforced Plastic in Construction: Engineering Aspects
(The American Society of Mechanical Engineers (ASME), 1981) -
Materials in World Perspective
(The American Society of Mechanical Engineers (ASME), 1981) -
A Criterion for Low-Cycle Fatigue Failure Under Biaxial States of Stress
(The American Society of Mechanical Engineers (ASME), 1981)The plastic strain energy required for failure in low-cycle biaxial fatigue is estimated using the energy in uniaxial fatigue and assumptions from the theory of plasticity. A criterion for ... -
An Explanation for the Effects of Hold Periods on the Elevated Temperature Fatigue Behavior of 2 1/4 Cr-1 Mo Steel
(The American Society of Mechanical Engineers (ASME), 1981)An analysis of previously reported elevated-temperature fatigue with hold time data supplemented by a metallographic examination of the 2 1/4 Cr-1Mo alloy steel specimens is reported. The tests ... -
Low Cycle Fatigue of Commercial Piping Steels in a BWR Primary Water Environment
(The American Society of Mechanical Engineers (ASME), 1981)This report summarizes results of a comprehensive experimental program on the low cycle fatigue behavior of commercial grade piping steels in a high-pressure, high-temperature, oxygenated water ... -
Small Crack Behavior and the Prediction of Fatigue Life
(The American Society of Mechanical Engineers (ASME), 1981)It is becoming increasingly evident that an understanding of incipient microcracking and growth of small cracks is essential to the development of improved predictions of the fatigue life of ... -
Fatigue Crack Growth Behavior of Explosively-Bonded Clad Steel Plates
(The American Society of Mechanical Engineers (ASME), 1981)Fatigue crack growth behavior of explosively-bonded clad steel plates was studied by making fatigue crack growth tests under a constant stress intensity factor range and carrying out a finite ... -
Ductile Tearing Instability of a Center-Cracked Panel of an Elastic-Plastic Strain Hardening Material
(The American Society of Mechanical Engineers (ASME), 1981)An analysis for crack instability in an elastic-plastic strain hardening material is presented which utilizes the J-integral and the tearing modulus parameter, T. A center-cracked panel of finite ... -
Fracture Toughness of 4130 Quenched and Tempered Steel
(The American Society of Mechanical Engineers (ASME), 1981)The fracture-energy criterion JIc was determined by the single specimen method on quenched and tempered 4130 steel used for tower anchor bars of high voltage transmission lines. A thermodynamic ... -
Age Softening Characteristics of Annealed 2-1/4Cr-1Mo Steel in the Temperature Range 424 to 704°C
(The American Society of Mechanical Engineers (ASME), 1981)The short-term age softening characteristics of isothermal annealed and post weld heat treated 2-1/4Cr-1Mo steel have been investigated over the temperature range 454 to 727°C (850 to ... -
Measuring the Actual Endurance Limit of One Specimen Using a Nondestructive Method
(The American Society of Mechanical Engineers (ASME), 1981)The conventional endurance limit does not characterize one specimen but a set of virgin specimens. This present study deals with the determination of the present state of one specimen by its ... -
Crack Arrest Modes of a Transverse Crack Going Through a Longitudinal Crack or a Hole
(The American Society of Mechanical Engineers (ASME), 1981)The process of a transverse crack intersecting a longitudinal central crack, a longitudinal eccentric crack, or a central hole was investigated by means of high-speed photography and caustics. ... -
On the Physical Basis of Auerbach’s Law
(The American Society of Mechanical Engineers (ASME), 1981) -
Efficiency of Wire Rope Terminations
(The American Society of Mechanical Engineers (ASME), 1981)Nine wire rope terminations were evaluated with respect to true efficiency, service life, and sensitivity to poor workmanship in a comprehensive laboratory test program. The portion of the program ...