Now showing items 1441-1460 of 3257

    • Spatial Free Plastic Forming of Slender Parts—Machine Design, Forming Limits, and Application 

      M. Thalmair; M. Reigl; H. Lippmann (The American Society of Mechanical Engineers (ASME), 2001)
      Free plastic forming of a slender part means that an initially straight bar, clamped at its both ends, is bent and twisted by an appropriate motion of the end supports only. Emphasis is ...
    • In Process Control of Strain in a Stretch Forming Process 

      D. E. Hardt; W. A. Norfleet; V. M. Valentin; A. Parris (The American Society of Mechanical Engineers (ASME), 2001)
      The process of stretch forming is used extensively in the aerospace industry to form large sheet panels of mild curvature. This has traditionally been a low precision process requiring considerable ...
    • Thermal Damage in Particulate-Reinforced Metal Matrix Composites 

      Y. C. Zhou; Z. P. Duan; T. Hashida; S. G. Long (The American Society of Mechanical Engineers (ASME), 2001)
      Thermal damage of SiC particulate-reinforced aluminum composites (MMCs) caused by laser thermal shock was investigated. The damage was induced by a combination of laser beam thermal shock and ...
    • Stamping Blank Optimal Layout and Coil Slitting Widths for Single and Multiple Blanks 

      T. J. Nye (The American Society of Mechanical Engineers (ASME), 2001)
      In stamping, operating costs are dominated by raw material costs, which can typically reach 75 percent of total costs in a stamping facility. In this paper, material utilization efficiency is ...
    • Viscoplastic Constitutive Modeling of Anisotropic Damage Under Nonproportional Loading 

      C. L. Chow; Edmund Chu; X. J. Yang (The American Society of Mechanical Engineers (ASME), 2001)
      Based on the theory of damage mechanics, a viscoplastic constitutive modeling of anisotropic damage for the prediction of forming limit curve (FLC) is developed. The model takes into account ...
    • Optimum Process Design in Sheet-Metal Forming With Finite Element Analysis 

      Hoon Huh; Se-Ho Kim (The American Society of Mechanical Engineers (ASME), 2001)
      Process optimization is carried out to determine process parameters which satisfy the given design requirements and constraint conditions in sheet-metal forming processes. The scheme incorporates ...
    • The Effects of Tooling Imperfections on the Initiation of Wrinkling in Finite Element Modeling of a Deep Drawing Process 

      J. Hematian; P. M. Wild (The American Society of Mechanical Engineers (ASME), 2001)
      A brief review of the literature on wrinkling in deep drawing processes is presented. It is noted that, while there is a large body of literature related to thin sheet, only one study related ...
    • Efficient Meshfree Formulation for Metal Forming Simulations 

      Sangpil Yoon; Cheng-Tang Wu; Research Associate; Hui-Ping Wang; Jiun-Shyan Chen (The American Society of Mechanical Engineers (ASME), 2001)
      A stabilized conforming (SC) nodal integration method is developed for elastoplastic contact analysis of metal forming processes. In this approach, strain smoothing stabilization is introduced to ...
    • Failure Analysis of Tubular Hydroforming 

      Z. C. Xia (The American Society of Mechanical Engineers (ASME), 2001)
      A mathematical analysis of failure developments for tubular hydroforming under combined internal pressure and end feeding is presented in this paper. Under considerations are two distinct failure ...
    • A Study on Fundamental Mechanisms of Warp and Recoil in Hemming 

      Guohua Zhang; Xin Wu; S. Jack Hu (The American Society of Mechanical Engineers (ASME), 2001)
      In this paper, the occurrence of recoil and surface warp during the flat surface-straight edge hemming process is investigated. A general-purpose finite element code ABAQUS/Standard is used to ...
    • Effects of Some Modeling Parameters of Finite Element Models of Binder Forming 

      Kuo-Kuang Chen; Chung-Yeh Sa (The American Society of Mechanical Engineers (ASME), 2001)
      This paper studies the effects of some modeling parameters on the accuracy of finite element simulation in sheet-metal forming. A simple stepdie, which simulates binder forming, is used. In ...
    • Modified Anisotropic Gurson Yield Criterion for Porous Ductile Sheet Metals 

      W. Y. Chien; S. C. Tang; J. Pan (The American Society of Mechanical Engineers (ASME), 2001)
      The influence of plastic anisotropy on the plastic behavior of porous ductile materials is investigated by a three-dimensional finite element analysis. A unit cell of cube containing a spherical ...
    • Optimal Blank Design for the Drawings of Arbitrary Shapes by the Sensitivity Method 

      H. B. Shim; K. C. Son (The American Society of Mechanical Engineers (ASME), 2001)
      The sensitivity method is employed in this work in order to find initial blank shapes which result in desired shapes after deformation. By assuming the final deformation shape be the drawn ...
    • Stress-Based Forming Limits in Sheet-Metal Forming 

      Thomas B. Stoughton (The American Society of Mechanical Engineers (ASME), 2001)
      A strain-based forming limit criterion is widely used throughout the sheet-metal forming industry to gauge the stability of the deformed material with respect to the development of a localized ...
    • Application of the Radial Return Method to Compute Stress Increments From Mroz’s Hardening Rule 

      Sing C. Tang; Z. Cedric Xia; Feng Ren (The American Society of Mechanical Engineers (ASME), 2001)
      It is well known in the literature that the isotropic hardening rule in plasticity is not realistic for handling plastic deformation in a simulation of a full sheet-metal forming process ...
    • Effective Models for Prediction of Springback In Flanging 

      Nan Song; Research Assistant; Shaofan Li; Dong Qian; Research Assistant; Jian Cao; Wing Kam Liu (The American Society of Mechanical Engineers (ASME), 2001)
      A study on the prediction of springback angle is presented, with focus on the straight flanging operation. The objective of this work is to evaluate the reliability of different methods of ...
    • Wrinkling Limit in Tube Bending 

      Xi Wang; Jian Cao (The American Society of Mechanical Engineers (ASME), 2001)
      Thin-walled tube bending has found many of its applications in the automobile and aerospace industries. This paper presents an energy approach to provide the minimum bending radius, which does ...
    • Stress and Strain Histories of Multiple Bending-Unbending Springback Process 

      H.-M. Huang; S. Jiang; S.-D. Liu (The American Society of Mechanical Engineers (ASME), 2001)
      A drawbead model with sheet metal passing through multiple bending-unbending processes was employed in this study to understand the springback phenomenon and to develop a numerical simulation ...
    • Nonlinear Kinematic Hardening Identification for Anisotropic Sheet Metals With Bending-Unbending Tests 

      M. Brunet; S. Godereaux; F. Morestin (The American Society of Mechanical Engineers (ASME), 2001)
      An inverse identification technique is proposed based on bending-unbending experiments on anisotropic sheet-metal strips. The initial anisotropy theory of plasticity is extended to include the ...
    • Generation of Cyclic Stress-Strain Curves for Sheet Metals 

      K. M. Zhao; J. K. Lee (The American Society of Mechanical Engineers (ASME), 2001)
      The main objective of this paper is to obtain the first few stress-strain loops of sheet metals from reverse loading so that the springback can be simulated accurately. Material parameters are ...