Journal of Engineering Materials and Technology: Recent submissions
Now showing items 1321-1340 of 3257
-
Special Issue on Durability and Damage Tolerance of Heterogeneous Materials and Structures
(The American Society of Mechanical Engineers (ASME), 2003) -
Strain Hardening at Large Strains as Predicted by Dislocation Based Polycrystal Plasticity Model
(The American Society of Mechanical Engineers (ASME), 2002)A recent strain hardening model for late deformation stages (Estrin, Y., Tóth, L.S., Molinari, A., and Bréchet, Y., Acta Materialia, 1998, “A dislocation-based model for all hardening stages ... -
Prediction of Grain-Boundary Interfacial Mechanisms in Polycrystalline Materials
(The American Society of Mechanical Engineers (ASME), 2002)A multiple slip dislocation-density based crystalline formulation has been coupled to a kinematically based scheme that accounts for grain-boundary (GB) interfacial interactions with dislocation ... -
Bicrystal-Based Modeling of Plasticity in FCC Metals
(The American Society of Mechanical Engineers (ASME), 2002)In this paper, intermediate modeling of polycrystalline plasticity is proposed for rigid viscoplatic large deformations. This approach is based on the use of a bicrystal as the elementary local ... -
X-Ray Microbeam Laue Pattern Studies of the Spreading of Orientation in OFHC Copper at Large Strains
(The American Society of Mechanical Engineers (ASME), 2002)This paper assesses, via X-ray microbeam diffraction, the effects of development of dislocation substructure on the distribution of sub-grain misorientations in annealed OFHC copper deformed to ... -
Averaging Models for Heterogeneous Viscoplastic and Elastic Viscoplastic Materials
(The American Society of Mechanical Engineers (ASME), 2002)Averaging models are proposed for viscoplastic and elastic-viscoplastic heterogeneous materials. The case of rigid viscoplastic materials is first discussed. Large deformations are considered. A ... -
Transformation Induced Plasticity: Mechanisms and Modeling
(The American Society of Mechanical Engineers (ASME), 2002)TRansformation Induced Plasticity (TRIP) phenomenon results from the competition between two basic mechanisms, namely the orientation and accommodation. An accurate description of such a behavior ... -
A Multiscale Model of Plasticity Based on Discrete Dislocation Dynamics
(The American Society of Mechanical Engineers (ASME), 2002)We present a framework coupling continuum elasto-viscoplasticity with three-dimensional discrete dislocation dynamics. In this approach, the elastic response is governed by the classical Hooke’s law ... -
Investigation of the Microstructural Evolution During Large Strain Cold Working of Metals by Means of Synchrotron Radiation—A Comparative Overview
(The American Society of Mechanical Engineers (ASME), 2002)Dislocation densities, arrangements and long range internal stresses in cold rolled polycrystalline Cu, Ni, and Al, as well as in cold torsioned Fe, were determined by X-ray diffraction profile ... -
Editorial
(The American Society of Mechanical Engineers (ASME), 2002)This Special Issue of the Journal of Engineering Materials and Technology (JEMT) contains a number of selected papers in the field of micromechanics in crystal plasticity. All papers in this ... -
A Technique for Deducing In-Plane Modulus and Coefficient of Thermal Expansion of a Supported Thin Film
(The American Society of Mechanical Engineers (ASME), 2002)A technique for determining the in-plane modulus and the coefficient of thermal expansion (CTE) of supported thin films has been developed. The modulus and CTE are calculated by solving two ... -
Optimization Design of Drawbead in Drawing Tools of Autobody Cover Panel
(The American Society of Mechanical Engineers (ASME), 2002)In the tooling design of autobody cover panels, design of drawbead will affect the distribution of drawing restraining force along mouth of dies and the relative flowing velocity of the blank, ... -
Prediction of Forming Limit Diagram Based on Damage Coupled Kinematic-Isotropic Hardening Model Under Nonproportional Loading
(The American Society of Mechanical Engineers (ASME), 2002)Based on the theory of damage mechanics, an anisotropic damage coupled mixed isotropic-kinematic hardening plastic model for the prediction of forming limit diagram (FLD) is developed. The model ... -
Numerical Simulation of the Mechanically Coupled Cook-Off Experiment
(The American Society of Mechanical Engineers (ASME), 2002)There has been a significant amount of recent interest concerning the behavior of High Explosives including work on an experiment known as the Mechanically Coupled Cook Off experiment in which ... -
Effect of Grain Boundaries on PLC Plastic Instabilities
(The American Society of Mechanical Engineers (ASME), 2002)The effect of single grain boundaries on the Portevin Le Cha⁁telier (PLC) effect was investigated by depth sensing Vickers indentation. The experiments were carried out in load control. Independently ... -
Dislocation Structure and Crystallite Size Distribution in Plastically Deformed Metals Determined by Diffraction Peak Profile Analysis
(The American Society of Mechanical Engineers (ASME), 2002)The dislocation densities and arrangement parameters and the crystallite size and size-distributions are determined in tensile or cyclically deformed polycrystalline copper specimens by X-ray ... -
Dislocation Motion in Crystals With a High Peierls Relief: A Unified Model Incorporating the Lattice Friction and Localized Obstacles
(The American Society of Mechanical Engineers (ASME), 2002)The combined effect of the lattice friction and localized obstacles on the individual dislocation velocity is considered. First the two effects are considered separately. The velocity of an ... -
Deformation and Recrystallization Textures in Cross-Rolled Copper Sheet
(The American Society of Mechanical Engineers (ASME), 2002)A study has been made of the deformation and recrystallization textures of 99.99% pure copper sheets which were cross rolled by 82 and 96% reduction in thickness and recrystallized in a salt ... -
Creep Rupture Due to Material Damage by Cavitation
(The American Society of Mechanical Engineers (ASME), 2002)A phenomenological model to predict creep rupture times, based on material damage due to void growth and coalescence is presented. The model employs the Gurson-Tvergaard yield function together ... -
Evaluation of Multiaxial Fatigue Life Prediction Methodologies for Ti-6Al-4V
(The American Society of Mechanical Engineers (ASME), 2002)Many critical engineering components are routinely subjected to cyclic multiaxial stress states, which may include non-proportional loading and multidimensional mean stresses. Existing multiaxial ...