Journal of Energy Resources Technology: Recent submissions
Now showing items 881-900 of 3450
-
Models and Analysis of the Pressure Field for a Hybrid Electric Vehicle With a Fuel Vapor-Containment System in a Refueling Process
(American Society of Mechanical Engineers (ASME), 2019)In order to ensure and improve the performance of the fuel vapor-containment system (FVS) on a hybrid electric vehicle (HEV), the vapor pressure field of the evaporative (EVAP) system in the refueling process was analyzed. ... -
Blade Element Momentum Study of Rotor Aerodynamic Performance and Loading for Active and Passive Microjet Systems
(American Society of Mechanical Engineers (ASME), 2019)This study investigates the performance of microjets for load reduction on the NREL-5 MW wind turbine and identifies optimal system parameters. Microjets provide blowing normal to the blade surface and can rapidly increase ... -
Simultaneous Extraction of Clean Coal and Rare Earth Elements From Coal Tailings Using Alkali-Acid Leaching Process
(American Society of Mechanical Engineers (ASME), 2019)With the supply restriction from traditional rare earth deposits, alternative sources of rare earth elements (REEs) such as coal are being studied. The United States National Energy Technology Laboratory has identified US ... -
Numerical Approaches for Modeling Gas–Solid Fluidized Bed Reactors: Comparison of Models and Application to Different Technical Problems
(American Society of Mechanical Engineers (ASME), 2019)Gas–solid fluidized bed reactors play an important role in many industrial applications. Nevertheless, there is a lack of knowledge of the processes occurring inside the bed, which impedes proper design and upscaling. In ... -
Theoretical Assessment of Convective and Radiative Heat Losses in a One-Dimensional Multiregion Premixed Flame With Counter-Flow Design Crossing Through Biofuel Particles
(American Society of Mechanical Engineers (ASME), 2019)Due to perspective of biomass usage as a viable source of energy, this paper suggests a potential theoretical approach for studying multiregion nonadiabatic premixed flames with counterflow design crossing through the ... -
Organophilic Clay-Based Drilling Fluids for Mitigation of Unconventional Shale Reservoirs Instability and Formation Damage
(American Society of Mechanical Engineers (ASME), 2019)High-performance drilling fluid was designed for unconventional reservoirs to minimize the formation damage and borehole instability using organophilic clay treated with trimethyloctylammonium bromide, novel in-house ... -
A Comprehensive Kinetics Library for Simulating the Combustion of Automotive Fuels
(American Society of Mechanical Engineers (ASME), 2019)We have developed a surrogate blending methodology to identify surrogates with a desired degree of complexity. Along with estimation methods for various physical and chemical properties for fuel blends, we have assembled ... -
Advanced Exergetic Assessment of a Vapor Compression Cycle With Alternative Refrigerants
(American Society of Mechanical Engineers (ASME), 2019)The present study compares the thermal performance of various alternative refrigerants with conventional refrigerant operating on a vapor compression cycle with energetic, exergetic, and advanced exergetic approaches. ... -
Experimental Investigation of the Damage Mechanisms of Drilling Mud in Fractured Tight gas Reservoir
(American Society of Mechanical Engineers (ASME), 2019)Mud pollution seriously restricts the development of tight gas reservoirs. For the Dabei tight gas field in Tarim Basin, lots of wells show a higher skin factor on the pressure buildup test curves after drilling. Little ... -
Stochastic Simplex Approximate Gradient for Robust Life-Cycle Production Optimization: Applied to Brugge Field
(American Society of Mechanical Engineers (ASME), 2019)In oil and gas industry, production optimization is a viable technique to maximize the recovery or the net present value (NPV). Robust optimization is one type of production optimization techniques where the geological ... -
Practical Approach to Functional Testing and Analytical Modeling of Axial Oscillation-Supported Drillstrings
(American Society of Mechanical Engineers (ASME), 2019)Drillstrings that include one or more axial oscillation tools (AOTs) are referred to as axial oscillation-supported drillstrings. Downhole vibrations induced by these tools in the drillstring are the most efficient method ... -
Numerical and Experimental Investigation on the Feasibility of Horizontal Drilling With a New Type of Jet Mill Bit
(American Society of Mechanical Engineers (ASME), 2019)Recently, a new type of jet mill bit (JMB) has been introduced to improve the cutting transport efficiency in horizontal drilling by comminuting cuttings into dust-like particles immediately after the cuttings are generated. ... -
Utilization of Hydroturbines in Wastewater Treatment Plants
(American Society of Mechanical Engineers (ASME), 2019)Wastewater treatment plants (WWTPs) are a significant energy consumer, yet there are several opportunities for implementing on-site power generation systems. Within the treatment process, the high flow rate of effluent is ... -
Development of an Advanced Finite Element Model and Parametric Study to Evaluate Cement Sheath Barrier
(American Society of Mechanical Engineers (ASME), 2019)Cement failure is known as one of the major causes for loss of well control events. Cement design is considered as one of the top technological knowledge gaps in high-pressure high-temperature oil and gas exploration. The ... -
Microscopic Studies of Immiscible Displacement Behavior in Interconnected Fractures and Cavities
(American Society of Mechanical Engineers (ASME), 2019)Carbonate rocks are generally highly heterogeneous that make it difficult to accurately assess the behavior of fluid flow and transport in them. In this paper, we experimentally investigate the oil–water displacement in ... -
Predictive Erosion Model for Mixed Flow Centrifugal Pump
(American Society of Mechanical Engineers (ASME), 2019)Electrical submersible pumps (ESPs) are widely used in upstream oil production. The presence of a low concentration solid phase, particle-laden flow, in the production fluid may cause severe damage in the internal sections ... -
Influence of Sand Production in an Unconsolidated Sandstone Reservoir in a Deepwater Gas Field
(American Society of Mechanical Engineers (ASME), 2019)In an unconsolidated sandstone reservoir of a deepwater gas field, due to the reduction of the rock compaction by deepwater, sand production is more likely to occur in the reservoir during production under certain production ... -
Efficiency Enhancement of Photovoltaic/Thermal Module Using Front Surface Cooling Technique in Winter and Summer Seasons: An Experimental Investigation
(American Society of Mechanical Engineers (ASME), 2019)This paper presents the effect of the front surface water cooling on performance parameters (solar cell temperature, back surface temperature, outlet water temperature, electrical efficiency, overall efficiency, etc.) of ... -
The Performance Influences of a Centrifugal Compressor Due to Volute Local Deformation
(American Society of Mechanical Engineers (ASME), 2019)Centrifugal compressors have broad applications in gas compression processes, especially in automobile turbocharger. During the turbocharger installation, there are many installation limitations in the compressor stage. ... -
Microscopic Determination of Remaining Oil Distribution in Sandstones With Different Permeability Scales Using Computed Tomography Scanning
(American Society of Mechanical Engineers (ASME), 2019)To investigate the characteristics of oil distribution in porous media systems during a high water cut stage, sandstones with different permeability scales of 53.63 × 10−3 μm2 and 108.11 × 10−3 μm2 were imaged under a ...