Journal of Energy Resources Technology: Recent submissions
Now showing items 901-920 of 3450
-
Oxy-Combustion Modeling for Direct-Fired Supercritical CO2 Power Cycles
(American Society of Mechanical Engineers (ASME), 2019)Supercritical CO2 power cycles for fossil energy power generation will likely employ oxy-combustion at very high pressures, possibly exceeding 300 bar. At these high pressures, a direct fired oxy-combustor is more likely ... -
Special Issue for the 12th International Conference on Energy Sustainability (ES2018)
(American Society of Mechanical Engineers (ASME), 2019) -
Multirotor Systems Using Three Shrouded Wind Turbines for Power Output Increase
(American Society of Mechanical Engineers (ASME), 2019)Brimmed-diffuser augmented wind turbines (B-DAWTs) can significantly increase the performance of the rotor. Multirotor systems (MRSs) have a lot of merits such as significant saving mass and overall cost of the wind turbine ... -
On the Assessment of a Numerical Weather Prediction Model for Solar Photovoltaic Power Forecasts in Cities
(American Society of Mechanical Engineers (ASME), 2019)Recent developments in the weather research and forecasting (WRF) model have made it possible to accurately estimate incident solar radiation. This study couples the WRF-solar modifications with a multilayer urban canopy ... -
Experimental Study of the Wake Regions in Wind Farms
(American Society of Mechanical Engineers (ASME), 2019)It is desired, through this work, to investigate in detail the scenario that takes place behind a single wind turbine unit by focusing on three parameters; average axial wind velocity component, velocity deficit, and total ... -
An Improved Mass Consistent Model for Three-Dimensional Wind Field Construction
(American Society of Mechanical Engineers (ASME), 2019)An improved diagnostic mass-consistent finite element model (FEM) has been developed to construct 3D wind fields over irregular terrain. Instead of using constant Gauss precision moduli over the whole domain in the existing ... -
Thermal Design and Analysis of a Solid-State Grid-Tied Thermal Energy Storage for Hybrid Compressed Air Energy Storage Systems
(American Society of Mechanical Engineers (ASME), 2019)Power overgeneration by renewable sources combined with less dispatchable conventional power plants introduces the power grid to a new challenge, i.e., instability. The stability of the power grid requires constant balance ... -
NH3 as a Transport Fuel in Internal Combustion Engines: A Technical Review
(American Society of Mechanical Engineers (ASME), 2019)Ammonia (NH3) is an excellent hydrogen (H2) carrier that is easy to bulk manufacture, handle, transport, and use. NH3 is itself combustible and could potentially become a clean transport fuel for direct use in internal ... -
Multivariable Analysis of Aerodynamic Forces on Slotted Airfoils for Wind Turbine Blades
(American Society of Mechanical Engineers (ASME), 2019)Improvement of the aerodynamic performance for cambered airfoils with leading-edge slots is investigated in this work. This concept is proven both computationally and experimentally in recent years. Five design variables ... -
A New Vascular System Highly Efficient in the Storage and Transport of Healing Agent for Self-Healing Wind Turbine Blades
(American Society of Mechanical Engineers (ASME), 2019)Self-healing wind turbine blades offer a substantial offset for costly blade repairs and failures. We discuss the efforts made to optimize the self-healing properties of wind turbine blades and provide a new system to ... -
Physicochemical Properties of Fuel Blends Composed of Heavy Fuel Oil and Tire-Derived Pyrolytic Oils
(American Society of Mechanical Engineers (ASME), 2019)The paper presents physicochemical properties of pyrolysis oil (PO) blends obtained from pyrolysis of rubber and spent tires mixed with selected heavy fuel oil (HFO) and the effect of PO properties on physicochemical ... -
Numerical Predictions of Three-Dimensional Unsteady Turbulent Film-Cooling for Trailing Edge of Gas-Turbine Blade Using Large Eddy Simulation
(American Society of Mechanical Engineers (ASME), 2019)This work investigates the performance of film-cooling on trailing edge of gas turbine blades using unsteady three-dimensional numerical model adopting large eddy simulation (LES) turbulence scheme in a low Mach number ... -
Numerical Investigation of Auto-Ignition Characteristics in Microstructured Catalytic Honeycomb Reactor for CH4–Air and CH4–H2–Air Mixtures
(American Society of Mechanical Engineers (ASME), 2019)Stable ranges of auto-ignition for the microcombustion of CH4 and CH4–H2 mixtures are identified numerically in a platinum-coated microcatalytic honeycomb reactor. Steady and transient simulations under pseudo-auto-thermal ... -
The Staged Thermal Conversion of Sewage Sludge in the Presence of Oxygen
(American Society of Mechanical Engineers (ASME), 2019)This study compares a staged thermal processing of the sewage sludge, with single step, integrated thermal processing. The aim of this study is to find the optimal conditions for drying and subsequently for carbonization ... -
Effect of Heat Treatment on the Combustion Characteristics of a Lignite
(American Society of Mechanical Engineers (ASME), 2019)In this study, the ignition and combustion behavior of raw and heat-treated single particles of lignite were experimentally investigated, with a focus on the effect of heat treatment temperatures. The lignite particles ... -
Evaluating Laser-Induced Breakdown Spectroscopy Sensor Technology for Rapid Source Characterization of Rare Earth Elements
(American Society of Mechanical Engineers (ASME), 2019)A prototype laser-induced breakdown spectroscopy (LIBS) sensor is tested for the determination of rare earth elements (Eu and Yb) in liquid and solid samples. The sensor head, built using a monolithic passively Q-switched ... -
Feasibility Analysis and Optimal Design of Acidizing of Coalbed Methane Wells
(American Society of Mechanical Engineers (ASME), 2019)Plugging is a prominent reason for production reduction in coalbed methane (CBM) wells. In order to solve this problem, authors conducted the feasibility analysis and optimal design of acidizing of CBM wells to remove the ... -
Experimental Simulation on Imbibition of the Residual Fracturing Fluid in Tight Sandstone Reservoirs
(American Society of Mechanical Engineers (ASME), 2019)Fracturing is a fundamental technique for enhancing oil recovery of tight sandstone reservoir. The pores in tight reservoirs generally have small radii and generate tremendous capillary force; accordingly, the imbibition ... -
Synergistic Interactions During Cocombustion of Lignite, Biomass, and Their Chars
(American Society of Mechanical Engineers (ASME), 2019)Woody biomasses such as ash tree (AT), hybrid poplar (HP), and rhododendron (RD) were subjected to torrefaction and carbonization at temperatures of 200 °C and 400 °C. Likewise, several lignite samples were carbonized at ... -
Renewable Energy Based Dimethyl-Ether Production System Linked With Industrial Waste Heat
(American Society of Mechanical Engineers (ASME), 2019)A new renewable energy based dimethyl-ether (DME) production system is proposed in this paper. The DME is then produced through the indirect synthesis method where methanol is produced first through carbon hydrogenation ...