Journal of Energy Resources Technology: Recent submissions
Now showing items 1341-1360 of 3450
-
An Experimental Study on Heterogeneous Porous Stacks in a Thermoacoustic Heat Pump
(The American Society of Mechanical Engineers (ASME), 2017)Growing evidence suggests that research must be done to develop energy efficient systems and clean energy conversion technologies to combat the limited sources of fossil fuel, its high price, and its adverse effects on ... -
Anthropogenic Heat Generation and Heat Exhaust to the Ultimate Sink
(The American Society of Mechanical Engineers (ASME), 2017)Anthropogenic heat generation in the world has been shown to be non-negligible, as it was a previous misconception. The scientific contribution of the current work is to urge scientists and engineers to develop technologies ... -
Artificial Neural Network Prediction of Diesel Engine Performance and Emission Fueled With Diesel–Kerosene–Ethanol Blends: A Fuzzy-Based Optimization
(The American Society of Mechanical Engineers (ASME), 2017)The present study explores the impact of ethanol on the performance and emission characteristics of a single cylinder indirect injection (IDI) Diesel engine fueled with Diesel–kerosene blends. Five percent ethanol is added ... -
Cooling of Turbine Blades With Expanded Exit Holes: Computational Analyses of Leading Edge and Pressure-Side of a Turbine Blade
(The American Society of Mechanical Engineers (ASME), 2017)Turbine blades are cooled by a jet flow from expanded exit holes (EEH) forming a low-temperature film over the blade surface. Subsequent to our report on the suction-side (low-pressure, high-speed region), computational ... -
Lattice Boltzmann Simulation of Wormhole Propagation in Carbonate Acidizing
(The American Society of Mechanical Engineers (ASME), 2017)In acidizing operations, the acid flows selectively through large pores to create wormholes. Wormhole propagation has been studied by many experts at macroscopic scale. In this paper, the lattice Boltzmann model (LBM), ... -
A Preliminary Investigation Into the Characterization of Asphaltenes Extracted From an Oil Sand and Two Vacuum Residues From Petroleum Refining Using Nuclear Magnetic Resonance, DEPT, and MALDI-TOF
(The American Society of Mechanical Engineers (ASME), 2017)This paper reports the findings of an investigation into the molecular structures and properties of three asphaltene samples, namely, an asphaltene sample extracted from Buton Oil Sand (Indonesia), and two asphaltene samples ... -
Evaluation of Transport Properties Effect on the Performance of Gas-Condensate Reservoirs Using Compositional Simulation
(The American Society of Mechanical Engineers (ASME), 2017)Gas-condensate productivity is highly dependent on the thermodynamic behavior of the fluids-in-place. The condensation attendant with the depletion of gas-condensate reservoirs leads to a deficiency in the flow of fluids ... -
An Efficient Workflow for Production Allocation During Water Flooding
(The American Society of Mechanical Engineers (ASME), 2017)This paper presents an efficient production optimization scheme for an oil reservoir undergoing water injection by optimizing the production rate for each well. In this approach, an adaptive version of simulated annealing ... -
The Effect of Different Drilling Fluids on Mechanical Friction
(The American Society of Mechanical Engineers (ASME), 2017)A very important aspect in highly inclined wellbores is the mechanical friction. For extended reach drilling (ERD) and through tubing extended reach drilling (TTERD) this can be a limiting factor. Friction caused by the ... -
Maximum Power From Fluid Flow by Applying the First and Second Laws of Thermodynamics
(The American Society of Mechanical Engineers (ASME), 2017)The application of equilibrium thermodynamics in the study of thermal plant performance under real operating conditions is a constant challenge. In this paper, an analysis of a reservoir pressure piston working between two ... -
Practical Data Mining and Artificial Neural Network Modeling for Steam-Assisted Gravity Drainage Production Analysis
(The American Society of Mechanical Engineers (ASME), 2017)Production forecast of steam-assisted gravity drainage (SAGD) in heterogeneous reservoir is important for reservoir management and optimization of development strategies for oil sand operations. In this work, artificial ... -
Modeling of Filter Cake Composition in Maximum Reservoir Contact and Extended Reach Horizontal Wells in Sandstone Reservoirs
(The American Society of Mechanical Engineers (ASME), 2017)Drilling mud should be properly designed to build an effective filter cake on the formation face during the drilling process. This filter cake should be removable to allow the oil and gas production. The need for removal ... -
Lab Testing and Finite Element Method Simulation of Hole Deflector Performance for Radial Jet Drilling
(The American Society of Mechanical Engineers (ASME), 2017)Radial jet drilling (RJD) is an efficient approach for improving the productivity of wells in low permeability, marginal and coal-bed methane (CBM) reservoirs at a very low cost. It uses high-pressure water jet to drill ... -
Ensemble Kalman Filter With Principal Component Analysis Assisted Sampling for Channelized Reservoir Characterization
(The American Society of Mechanical Engineers (ASME), 2017)Ensemble Kalman filter (EnKF) is one of the widely used optimization methods in petroleum engineering. It uses multiple reservoir models, known as ensemble, for quantifying uncertainty ranges, and model parameters are ... -
Research on Underground Dynamic Fluid Pressure Balance in the Process of Oil Shale In-Situ Fracturing-Nitrogen Injection Exploitation
(The American Society of Mechanical Engineers (ASME), 2017)Oil shale in-situ retorting is a reasonable development technology. However, the ground water may flow into fractures in oil shale layer that impact the process of oil shale in-situ retorting. This paper introduced oil ... -
A Mathematical Model and Inflow Control Effect Analysis of Inflow Control Devices Completed Horizontal Well
(The American Society of Mechanical Engineers (ASME), 2017)The main purpose of this paper is to analyze and compare the influence of nozzle size, uneven gravel packing, packer leakage, and dynamic production process on the inflow control effect. First, a new mathematical model of ... -
Dilution Sensitivity of Particulate Matter Emissions From Reactivity-Controlled Compression Ignition Combustion
(The American Society of Mechanical Engineers (ASME), 2017)Dual-fuel reactivity-controlled compression ignition (RCCI) combustion can yield high thermal efficiency and simultaneously low NOx and soot emissions. Although soot emissions from RCCI are very low, hydrocarbon (HC) ... -
Design and Experimental Study of a Cascade Thermoacoustic Engine for Remote and Rural Communities
(The American Society of Mechanical Engineers (ASME), 2017)The design, construction, and experimental evaluation of a cascade thermoacoustic engine are presented in this paper. The system was designed and built under the constraint of an inexpensive device to meet the energy needs ... -
Characterization and Prediction of Gas Breakthrough With Cyclic Steam and Gas Stimulation Technique in an Offshore Heavy Oil Reservoir
(The American Society of Mechanical Engineers (ASME), 2017)In this paper, a reservoir simulation study was conducted for the characterization and prediction of gas breakthrough during the development of cyclic steam and gas stimulation (CSGS) for a horizontal well. A new concept ... -
An Experimental Study of Optimum Angle of Air Swirler Vanes in Liquid Fuel Burners
(The American Society of Mechanical Engineers (ASME), 2017)The present work shows that how the angle of an air swirler vane affects the combustion characteristics of liquid fuels such as flame temperature, radiation heat flux, combustion efficiency, and pollutants' emission. It ...