Journal of Energy Resources Technology: Recent submissions
Now showing items 1321-1340 of 3450
-
New Formulation for Sandstone Acidizing That Eliminates Sand Production Problems in Oil and Gas Sandstone Reservoirs
(The American Society of Mechanical Engineers (ASME), 2017)The sandstone rocks' integrity and consolidation may be highly affected by the type and the strength of the stimulation fluids. Strong acids such as HF/HCl impair the rock consolidation. The reduction in the sandstone rock ... -
Special Issue for the Second International Conference on 2016 Next Generation of Wind Energy (ICNGWE)
(The American Society of Mechanical Engineers (ASME), 2017) -
Effects of Iron Nanoparticles Blended Biodiesel on the Performance and Emission Characteristics of a Diesel Engine
(The American Society of Mechanical Engineers (ASME), 2017)The technology for use of biodiesels (up to 20%) as alternative fuel in diesel engines has already been established. In this regard, some suitable modification of biodiesel with appropriate additives may help in increasing ... -
Recovery Efficiency in Hydraulically Fractured Shale Gas Reservoirs
(The American Society of Mechanical Engineers (ASME), 2017)At the end of 2015 the U.S. held 5.6% or approximately 369 Tcf of worldwide conventional natural gas proved reserves (British Petroleum Company, 2016, “BP Statistical Review of World Energy June 2016,” British Petroleum ... -
Toward Identifying Aeroelastic Mechanisms in Near-Wake Instabilities of Floating Offshore Wind Turbines
(The American Society of Mechanical Engineers (ASME), 2017)A free-vortex-wake aeroelastic framework evaluates the impact of blade elasticity on the near-wake formation and its linear stability for onshore and offshore configurations of the National Renewable Energy Laboratory ... -
Power Augmentation of Shrouded Wind Turbines in a Multirotor System
(The American Society of Mechanical Engineers (ASME), 2017)Diffuser-augmented wind turbines (DAWTs) can significantly increase the performance of the rotor. Multirotor systems (MRSs) have a lot of merits such as significant saving mass and overall cost of the wind turbine system. ... -
Computational Fluid Dynamics Modeling of the Fuel Reactor in NETL's 50 kWth Chemical Looping Facility
(The American Society of Mechanical Engineers (ASME), 2017)The National Energy Technology Laboratory (NETL) has explored chemical looping in its 50 kWth facility using a number of oxygen carriers. In this work, the results for methane conversion in the fuel reactor with a hematite ... -
High Pressure Shock Tube Ignition Delay Time Measurements During Oxy-Methane Combustion With High Levels of CO2 Dilution
(The American Society of Mechanical Engineers (ASME), 2017)Ignition delay times and methane species time-histories were measured for methane/O2 mixtures in a high CO2 diluted environment using shock tube and laser absorption spectroscopy. The experiments were performed between ... -
Genotoxicity of Diesel Particulate Matter Emitted by Port-Injection of Hydrous Ethanol and n-Butanol
(The American Society of Mechanical Engineers (ASME), 2017)This work evaluated the genotoxic potential of the soluble organic material (SOM) extracted from the particulate matter (PM) emitted by an automotive diesel engine. The engine was modified to operate with a home-made ... -
Experimental Investigation of Dynamic Adsorption–Desorption of New Nonionic Surfactant on Carbonate Rock: Application to Enhanced Oil Recovery
(The American Society of Mechanical Engineers (ASME), 2017)Surfactants have the potential to reduce the interfacial tension between oil and water and mobilize the residual oil. An important process which makes the surfactant injection to be less effective is loss of surfactant to ... -
Efficacy of Add-On Hydrous Ethanol Dual Fuel Systems to Reduce NOx Emissions From Diesel Engines
(The American Society of Mechanical Engineers (ASME), 2017)Aftermarket dual-fuel injection systems using a variety of different fumigants have been proposed as alternatives to expensive after-treatment to control NOx emissions from legacy diesel engines. However, our previous work ... -
A Taguchi-Fuzzy-Based Multi-Objective Optimization of a Direct Injection Diesel Engine Fueled With Different Blends of Leucas Zeylanica Methyl Ester and 2-Ethylhexyl Nitrate Diesel Additive With Diesel
(The American Society of Mechanical Engineers (ASME), 2017)The increasing price of conventional diesel fuel, its deficiency, and the injurious outcome of combustion produced contaminants seem to make different sources more fascinating. Leucas zeylanica plant is noncomestible in ... -
Influence of Key Structural Parameters of Combustion Chamber on the Performance of Diesel Engine
(The American Society of Mechanical Engineers (ASME), 2017)The structural parameters of combustion chamber have great impacts on the process of air–fuel mixing, combustion, and emissions of diesel engine. The dynamic characteristics and emission performances could be improved by ... -
Characteristics of Auto-Ignition in Internal Combustion Engines Operated With Gaseous Fuels of Variable Methane Number
(The American Society of Mechanical Engineers (ASME), 2017)This paper explores the feasibility of using Syngas with low methane number as fuel for commercial turbocharged internal combustion engines. The effect of methane number (MN), compression ratio (CR), and intake pressure ... -
A Comparison of Methyl Decanoate and Tripropylene Glycol Monomethyl Ether for Soot-Free Combustion in an Optical Direct-Injection Diesel Engine
(The American Society of Mechanical Engineers (ASME), 2017)Oxygenated fuels have beneficial effects for leaner lifted-flame combustion (LLFC), a nonsooting mode of mixing-controlled combustion associated with lift-off length equivalence ratios below approximately 2. A single-cylinder ... -
In-Furnace Sulfur Capture by Cofiring Coal With Alkali-Based Sorbents
(The American Society of Mechanical Engineers (ASME), 2017)This manuscript presents experimental results on the reduction of sulfur oxide emissions from combustion of a high-sulfur content pulverized bituminous coal (Illinois #6 Macoupin) using a dry sorbent injection method. The ... -
Analytical Study and Experimental Validation of Copper II Sulfate and Potassium Ferri/Ferrocyanide Thermocells Using Onsager Flux Equations
(The American Society of Mechanical Engineers (ASME), 2017)Thermocells convert heat energy directly into electrical energy through charge-transfer reactions at the electrode–electrolyte interface. To perform an analytical study on the behavior of thermocells, the Onsager flux ... -
Determination of Newtonian Fluid Flow Behavior Including Temperature Effects in Fully Eccentric Annulus
(The American Society of Mechanical Engineers (ASME), 2017)In this work, the effect of temperature on the pressure loss for Newtonian fluid in fully eccentric annulus with pipe rotation is investigated. Extensive experiments with water are conducted at Izmir Katip Celebi University ... -
A Systems Engineering Approach to Harnessing Human Energy in Public Places: A Feasibility Study
(The American Society of Mechanical Engineers (ASME), 2017)This study analyzes the feasibility of placing modified exercise equipment in public places to enable human energy harnessing. By assessing the impacts as a system-level synthesis of economic, environmental, productivity, ... -
Parametric Analysis and Comparison of Ejector Expansion Refrigeration Cycles With Constant Area and Constant Pressure Ejectors
(The American Society of Mechanical Engineers (ASME), 2017)In this work, parametric analysis of ejector expansion refrigeration cycles (EERC) with two different types of ejectors (constant area (CA) ejector and constant pressure (CP) ejector) is performed, and comparison of the ...