Now showing items 1301-1320 of 3450

    • Production Cost–Efficiency Relation for Room Air Conditioners and Its Economic and Environmental Impact 

      Mokheimer, Esmail M. A.; Hussain, Syed; Nadeem, Magd DinAli; Abdulrahman, Ahmed Ali Mahmoud (The American Society of Mechanical Engineers (ASME), 2017)
      A large amount of the operating costs in a building is determined by the energy requirements of its air conditioning system. The demand for more energy efficient units desired by both manufacturers and the consumers results ...
    • Exergy Destruction Mechanism of Coal Gasification by Combining the Kinetic Method and the Energy Utilization Diagram 

      Wu, Handong; Li, Sheng; Gao, Lin (The American Society of Mechanical Engineers (ASME), 2017)
      Gasification is the core unit of coal-based production systems and is also the site where one of the largest exergy destruction occurs. This paper reveals the exergy destruction mechanism of carbon gasification through a ...
    • Emissions From Light-Duty Passenger Cars Fueled With Ternary Blend of Gasoline, Methanol, and Ethanol 

      Zhang, Chuanzhen; Ge, Yunshan; Tan, Jianwei; li, Lan; Peng, Zihang; Wang, Xin (The American Society of Mechanical Engineers (ASME), 2017)
      In this study, the emissions from three passenger cars with gasoline, methanol, ethanol, and their blend were tested. The results show that the CO and HC emissions from the exhaust of the vehicles fueled with E7.5/M7.5 ...
    • Assessment of the Noise Generated by Wind Turbines at Low Frequencies 

      Marini, Martino; Baccoli, Roberto; Mastino, Costantino C.; Di Bella, Antonino; Bernardini, Carlo; Masullo, Massimiliano (The American Society of Mechanical Engineers (ASME), 2017)
      The noise production from wind turbines (WT) and its propagation into the surrounding environment have an impact on the receptors (RC) that have to be accurately predicted within the environmental impact assessment. The ...
    • Evaluating the Performance of a Newly Developed Carbon Capture Device for Mobile Emission Sources 

      Ahmed, Samer F.; Atilhan, Mert (The American Society of Mechanical Engineers (ASME), 2017)
      In the present study, a new carbon capture device that can be carried on-board vehicles has been developed and tested. The developed device uses absorption and adsorption methods of postcombustion CO2 capture. Sodium ...
    • Experimental Study and Simulation of a Small-Scale Horizontal-Axis Wind Turbine 

      Jackson, Randall S.; Amano, Ryoichi (The American Society of Mechanical Engineers (ASME), 2017)
      The advancement of wind energy as an alternative source to hydrocarbons depends heavily on research activities in turbulence modeling and experimentation. The velocity deficit behind wind turbines affects the power output ...
    • Investigation of Flow Over an Airfoil Using a Hybrid Detached Eddy Simulation–Algebraic Stress Turbulence Model 

      Beyhaghi, Saman; Amano, Ryoichi S. (The American Society of Mechanical Engineers (ASME), 2017)
      Turbulent air flow over an NACA 4412 airfoil is investigated computationally. To overcome the near-wall inaccuracies of higher order turbulence models such as large Eddy simulation (LES) and detached Eddy simulation (DES), ...
    • Calculation of the Water Droplets Local Collection Efficiency on the Wind Turbines Blade 

      Hu, Liangquan; Zhu, Xiaocheng; Hu, Chenxing; Chen, Jinge; Du, Zhaohui (The American Society of Mechanical Engineers (ASME), 2017)
      Wind turbines operating in cold climate are susceptible to icing events. In order to gain a better understanding of the blade icing, the water droplets local collection efficiency affected by different factors was investigated. ...
    • Power Properties of Two Interacting Wind Turbine Rotors 

      Okulov, Valery L.; Mikkelsen, Robert; Sørensen, Jens N.; Naumov, Igor V.; Tsoy, Mikhail A. (The American Society of Mechanical Engineers (ASME), 2017)
      In the current experiments, two identical wind turbine models were placed in uniform flow conditions in a water flume. The initial flow in the flume was subject to a very low turbulence level, limiting the influence of ...
    • Effects From Complex Terrain on Wind-Turbine Performance 

      Hyvärinen, Ann; Segalini, Antonio (The American Society of Mechanical Engineers (ASME), 2017)
      In this work, experimental measurements are made to study wind turbines over complex terrains and in presence of the atmospheric boundary layer. Thrust and power coefficients for single and multiple turbines are measured ...
    • Wake Deflection in Long Distance From a Yawed Wind Turbine 

      Uemura, Yuta; Tanabe, Yasutada; Mamori, Hiroya; Fukushima, Naoya; Yamamoto, Makoto (The American Society of Mechanical Engineers (ASME), 2017)
      Since it is important to prevent the wake produced by upstream wind turbines from interfering with downstream wind turbines, a method of deflecting such wakes is desired. In this paper, we present the coupled analysis ...
    • Self-Healing of Wind Turbine Blades Using Microscale Vascular Vessels 

      Matt, Arun Kumar Koralagundi; Beyhaghi, Saman; Amano, Ryoichi S.; Guo, Jie (The American Society of Mechanical Engineers (ASME), 2017)
      Development of high bending stresses due to a sudden gust of wind is a significant cause for the failure of wind turbine blades. Self-healing provides a fool proof safety measure against catastrophic failure by healing the ...
    • Computational Fluid Dynamics Study for Improvement of Prediction of Various Thermally Stratified Turbulent Boundary Layers 

      Hattori, Hirofumi; Houra, Tomoya; Kono, Amane; Yoshikawa, Shota (The American Society of Mechanical Engineers (ASME), 2017)
      The objectives of this study are to reconstruct a turbulence model of both the large Eddy simulation (LES) and the Reynolds-averaged Navier–Stokes simulation (RANS) which can predict wind synopsis in various thermally ...
    • Shape Morphing Mechanism for Improving Wind Turbines Performance 

      Alejandro Franco, Jesus; Carlos Jauregui, Juan; Carbajal, Andres; Toledano-Ayala, Manuel (The American Society of Mechanical Engineers (ASME), 2017)
      Wind energy technology is facing new challenges due to the increment in rotor diameter. Nowadays, several studies focus on the development of new flow control methods for load alleviation, in order to increase the lifetime ...
    • Improvement of Aerodynamic Performance of Cambered Airfoils Using Leading-Edge Slots 

      Beyhaghi, Saman; Amano, Ryoichi S. (The American Society of Mechanical Engineers (ASME), 2017)
      Feasibility of increasing lift and decreasing drag by drilling narrow span-wide channels near the leading edge of NACA 4412 airfoils is investigated. It is proposed to drill two-segment slots that allow some of the incoming ...
    • Wind–Wave Interaction Effects on a Wind Farm Power Production 

      AlSam, A.; Szasz, R.; Revstedt, J. (The American Society of Mechanical Engineers (ASME), 2017)
      In the current study, the effects of the nonlocally generated long sea surface waves (swells) on the power production of a 2 × 2 wind farm are investigated by using large-eddy simulations (LES) and actuator-line method ...
    • Regeneration of Initial Ensembles With Facies Analysis for Efficient History Matching 

      Kang, Byeongcheol; Choe, Jonggeun (The American Society of Mechanical Engineers (ASME), 2017)
      Reservoir characterization is needed for estimating reservoir properties and forecasting production rates in a reliable manner. However, it is challenging to figure out reservoir properties of interest due to limited ...
    • Drilling Fluid Density and Hydraulic Drag Reduction With Glass Bubble Additives 

      Kutlu, Bahri; Takach, Nicholas; Ozbayoglu, Evren M.; Miska, Stefan Z.; Yu, Mengjiao; Mata, Clara (The American Society of Mechanical Engineers (ASME), 2017)
      This study concentrates on the use of materials known as hollow glass spheres, also known as glass bubbles, to reduce the drilling fluid density below the base fluid density without introducing a compressible phase to the ...
    • Experimental Study of Operation Stability of a Spark Ignition Engine Fueled With Coal Bed Gas 

      Chen, Lei; Song, Peng; Long, Wuqiang; Feng, Liyan; Zhang, Jing; Wang, Yang (The American Society of Mechanical Engineers (ASME), 2017)
      Experimental research has been carried out on a single cylinder naturally aspirated spark ignition engine which was modified to operate with coal-bed gas fuel to investigate the method of improving operation stability and ...
    • On Heat Transfer Issues for Wind Energy Systems 

      Sunden, Bengt; Wu, Zan (The American Society of Mechanical Engineers (ASME), 2017)
      Control of heat transfer is important in wind power systems. In cold climate, the problems of icing and de-icing of the turbine blades need to be handled by efficient heat transfer technologies. Heat-generating components ...