Journal of Energy Resources Technology: Recent submissions
Now showing items 1281-1300 of 3450
-
Molecular Dynamic Simulation of Hydrogen Production by Catalytic Gasification of Key Intermediates of Biomass in Supercritical Water
(The American Society of Mechanical Engineers (ASME), 2018)Supercritical water gasification (SCWG) is an efficient and clean conversion of biomass due to the unique chemical and physical properties. Anthracene and furfural are the key intermediates in SCWG, and their microscopic ... -
Analyses of the Efficiency of a High-Temperature Gas-Cooled Nuclear Reactor Cogeneration System Generating Heat for the Sulfur–Iodine Cycle
(The American Society of Mechanical Engineers (ASME), 2018)The paper presents the possibilities of the use of a high-temperature gas-cooled nuclear reactor for energy purposes in the hydrogen and electricity production process. The system provides heat for a thermochemical ... -
A Comparative Study of Syngas Production From Two Types of Biomass Feedstocks With Waste Heat Recovery
(The American Society of Mechanical Engineers (ASME), 2018)This paper deals with an integrated biomass system developed for syngas production with waste heat recovery option and analyzes this system thermodynamically using both energy and exergy approaches. Also, an aspenplus ... -
A Power-Law Mixing Rule for Predicting Apparent Diffusion Coefficients of Binary Gas Mixtures in Heavy Oil
(The American Society of Mechanical Engineers (ASME), 2018)A power-law mixing rule has been developed to determine apparent diffusion coefficient of a binary gas mixture on the basis of molecular diffusion coefficients for pure gases in heavy oil. Diffusion coefficient of a pure ... -
Kinetic Effects of Methanol Addition on the Formation and Consumption of Formaldehyde and Benzene in Premixed n-Heptane/Air Flames
(The American Society of Mechanical Engineers (ASME), 2018)A numerical investigation was conducted to explore the kinetic effects of methanol addition on the formation and consumption of formaldehyde and benzene in premixed stoichiometric n-heptane/air flames at atmospheric pressure. ... -
Theoretical Performance Limits of an Isobaric Hybrid Compressed Air Energy Storage System
(The American Society of Mechanical Engineers (ASME), 2018)The desire to increase power production through renewable sources introduces a number of problems due to their inherent intermittency. One solution is to incorporate energy storage systems as a means of managing the ... -
Torrefaction of Healthy and Beetle Kill Pine and Co-Combustion With Sub-Bituminous Coal
(The American Society of Mechanical Engineers (ASME), 2018)Combustion of biomass and co-combustion with fossil fuels are viable means of reducing emissions in electricity generation, and local biomass resources are appealing to minimize life cycle emissions. In the Rocky Mountain ... -
Effect of Acoustic Stimulation on Aqueous Phase Trapping in Low-Permeability Sandstones
(The American Society of Mechanical Engineers (ASME), 2017)Formation damage from aqueous phase trapping in low-permeability sandstones can be removed using mutual solvents, blends of alcohols and mutual solvents, and surfactants. These treatments modify the interfacial tension of ... -
Ellipsometric Measurements of the Thermal Stability of Alternative Fuels
(The American Society of Mechanical Engineers (ASME), 2017)Thermal stability is an important characteristic of alternative fuels that must be evaluated before they can be used in aviation engines. Thermal stability refers to the degree to which a fuel breaks down when it is heated ... -
Optimization of Smart Water Chemical Composition for Carbonate Rocks Through Comparison of Active Cations Performance
(The American Society of Mechanical Engineers (ASME), 2017)Designing smart water (SW) by optimizing the chemical composition of injected brine is a promising low-cost technique that has been developed for both sandstone and carbonate reservoirs for several decades. In this study, ... -
The Experimental and Model Study on Variable Mass Flow for Horizontal Wells With Perforated Completion
(The American Society of Mechanical Engineers (ASME), 2017)The variable mass flow in perforated horizontal wells is very complex. One reason is that the perforation can increase the roughness of the pipe wall which will increase the frictional pressure drop. The other is the fluid ... -
Experimental and Theoretical Quantification of Nonequilibrium Phase Behavior and Physical Properties of Foamy Oil Under Reservoir Conditions
(The American Society of Mechanical Engineers (ASME), 2017)A novel and pragmatic technique has been proposed to quantify the nonequilibrium phase behavior together with physical properties of foamy oil under reservoir conditions. Experimentally, constant-composition expansion (CCE) ... -
Performance of a Diesel Engine at High Coolant Temperatures
(The American Society of Mechanical Engineers (ASME), 2017)The current state of the art in waste heat recovery (WHR) from internal combustion engines (ICEs) is limited in part by the low temperature of the engine coolant. In the present study, the effects of operating a diesel ... -
Co-Combustion of Pulverized Coal and Biomass in Fluidized Bed of Furnace
(The American Society of Mechanical Engineers (ASME), 2017)Combustion processes of two fuels, pulverized coal and biomass, in furnaces take place at steady state. Combustion of condensed fuels involves one-way interfacial flux due to phenomena in the condensed phase (evaporation ... -
Computing the Exergy of Solar Radiation From Real Radiation Data
(The American Society of Mechanical Engineers (ASME), 2017)The decrease of fossil fuels availability and the consequent increase of their price have led to a rapid evolution of renewable market and policy frameworks in recent years. Renewable resources include solar radiation, ... -
High-Speed Rainbow Schlieren Deflectometry of n-Heptane Sprays Using a Common Rail Diesel Injector
(The American Society of Mechanical Engineers (ASME), 2017)More precise measurements of the fuel injection process can enable better combustion control and more accurate predictions resulting in a reduction of fuel consumption and toxic emissions. Many of the current methods ... -
Turbulent Flame Characteristics of Oxycoal MILD Combustion
(The American Society of Mechanical Engineers (ASME), 2017)Oxycoal combustion was numerically simulated in a lab-scale cylindrical furnace (Φ200 mm × 2 m) with high-velocity oxygen jets. The mesoscopic characteristics of turbulent flame behavior such as nondimensional numbers ReT, ... -
An Investigation of Wind Farm Power Production for Various Atmospheric Boundary Layer Heights
(The American Society of Mechanical Engineers (ASME), 2017)The dependency of the atmospheric boundary layer (ABL) characteristics on the ABL’s height is investigated by using large eddy simulations (LES). The impacts of ABL’s height on the wind turbine (WT) power production are ... -
A Study on the Evaporation of Water–Ethanol Mixture Using Rainbow Refractometry
(The American Society of Mechanical Engineers (ASME), 2017)Evaporation of droplets of liquid mixture is a subject of interest in combustion studies, e.g., combustion of bioethanol blends. In this paper, experimental investigation, using rainbow refractometry, on the variations of ... -
Optimal Operational Scheduling of Renewable Energy Sources Using Teaching–Learning Based Optimization Algorithm by Virtual Power Plant
(The American Society of Mechanical Engineers (ASME), 2017)In recent years, a large number of renewable energy sources (RESs) have been added into modern distribution systems because of their clean and renewable property. Nevertheless, the high penetration of RESs and intermittent ...