Journal of Energy Resources Technology: Recent submissions
Now showing items 1361-1380 of 3450
-
Study of Heat and Mass Transfer in MgCl2/NH3 Thermochemical Batteries
(The American Society of Mechanical Engineers (ASME), 2017)Intermittency of sustainable energy or waste heat availability calls for energy storage systems such as thermal batteries. Thermochemical batteries based on a reversible solid–gas (MgCl2–NH3) reactions and NH3 liquid–gas ... -
Novel Catalytic Systems for Waste Tires Pyrolysis: Optimization of Gas Fraction
(The American Society of Mechanical Engineers (ASME), 2017)In this paper, catalyzed pyrolysis of scrap tires was studied in order to identify the influence of catalysts on gas composition during the main thermal range of the decomposition process. The aim is related to gas fraction ... -
Effect of Nanoparticles on the Fuel Properties and Spray Performance of Aviation Turbine Fuel
(The American Society of Mechanical Engineers (ASME), 2017)The influence of nanoparticles' dispersion on the physical properties of aviation fuel and its spray performance has been investigated in this work. To this end, the conventional Jet A-1 aviation fuel and its mixtures with ... -
Performance Improvement of Capacitive Deionization for Water Desalination Using a Multistep Buffered Approach
(The American Society of Mechanical Engineers (ASME), 2017)Due to the increasing demand for clean and potable water stemming from population growth and exacerbated by the scarcity of fresh water resources, more attention has been drawn to innovative methods for water desalination. ... -
Designing Three-Dimensional Directional Well Trajectories Using Bézier Curves
(The American Society of Mechanical Engineers (ASME), 2017)A relatively simple, general, and very flexible method to design complex, three-dimensional hole trajectories can be obtained by using a 3D extension for Bézier curves. This approach offers superior results in terms of ... -
Wind Farm Layout Sensitivity Analysis and Probabilistic Model of Landowner Decisions
(The American Society of Mechanical Engineers (ASME), 2017)This paper offers tools and insights regarding wind farm layout to developers in determining the conditions under which it makes sense to invest resources into more accurately predicting of the cost-of-energy (COE), a ... -
Analytical and Numerical Modeling of Solar Chimney
(The American Society of Mechanical Engineers (ASME), 2017)Solar chimney or Trombe wall has been studied numerically and analytically. Analytical results available in the literature overestimate air flow rate by 46–97%. While insulated walls are used in the experiments, there might ... -
Time-Resolved Experimental Characterization of the Wakes Shed by H-Shaped and Troposkien Vertical Axis Wind Turbines
(The American Society of Mechanical Engineers (ASME), 2017)In this paper, the aerodynamics of two vertical axis wind turbines (VAWTs) are discussed, on the basis of a wide set of experiments performed at Politecnico di Milano, Milan, Italy. A H-shaped and a Troposkien Darrieus ... -
Initial Ensemble Design Scheme for Effective Characterization of Three-Dimensional Channel Gas Reservoirs With an Aquifer
(The American Society of Mechanical Engineers (ASME), 2017)Reservoir characterization is a process of making models, which reliably predict reservoir behaviors. Ensemble Kalman filter (EnKF) is one of the fine methods for reservoir characterization with many advantages. However, ... -
Drill Bit Contact Dynamics Including Side Cutting: Simulation and Validation
(The American Society of Mechanical Engineers (ASME), 2017)Simulation techniques are increasingly becoming popular in recent years as a way of simulating oil drilling processes. Among them, directional drilling is a specific method that benefits enormously from such numerical ... -
A Parametrically Broadband Nonlinear Energy Harvester
(The American Society of Mechanical Engineers (ASME), 2017)In this work, for the first time, an energy harvester based on the nonlinear dynamical response of a parametrically excited cantilever beam in contact with mechanical stoppers has been fabricated and tested; a 145% increase ... -
Experimental Study of Drilling Fluid's Filtration and Mud Cake Evolution in Sandstone Formations
(The American Society of Mechanical Engineers (ASME), 2017)In real time drilling, the complexity of drilling fluid filtration is majorly attributed to changing mud rheology, formation permeability, mud particle size distribution (PSD), filter cake plastering effects, and geochemical ... -
Superheater and Drum Lifetime Estimation: An Approach Based on Dynamic Analysis
(The American Society of Mechanical Engineers (ASME), 2017)The increasing penetration of variable and unpredictable renewable energy sources into the liberalized electricity market brings about significant changes in the management strategies of fossil fuel power plants. These new ... -
Scaling Criteria for Waterflooding and Immiscible CO2 Flooding in Heavy Oil Reservoirs
(The American Society of Mechanical Engineers (ASME), 2017)Scaling criteria have been developed and validated to evaluate performance of waterflooding and immiscible CO2 flooding in heavy oil reservoirs by using a three-dimensional (3D) sandpacked displacement model. Experimentally, ... -
Energy and Exergy Analyses of a Power Plant With Carbon Dioxide Capture Using Multistage Chemical Looping Combustion
(The American Society of Mechanical Engineers (ASME), 2017)A thermodynamic model and parametric analysis of a natural gas-fired power plant with carbon dioxide (CO2) capture using multistage chemical looping combustion (CLC) are presented. CLC is an innovative concept and an ... -
Impacts of Major Offshore Oil Spill Incidents on Petroleum Industry and Regional Economy
(The American Society of Mechanical Engineers (ASME), 2017)Disasters such as offshore oil spills will have a significant negative impact on occupations, incomes, tariffs, and further profits, adding to the struggles of regional area held up in difficulty. Such a broad size of ... -
Relative Significance of Multiple Parameters on the Mechanical Specific Energy and Frictional Responses of Polycrystalline Diamond Compact Cutters
(The American Society of Mechanical Engineers (ASME), 2017)A high pressure single polycrystalline diamond compact (PDC) cutter testing facility was used to investigate the effect of five factors on PDC cutter performance on Alabama marble. The factors include: depth of cut (DOC), ... -
Novel Nanocomposite Fiber-Laden Viscoelastic Fracturing Fluid for Coal Bed Methane Reservoir Stimulation
(The American Society of Mechanical Engineers (ASME), 2017)As coal has strong adsorption characteristics and well-developed natural fracture systems, an improper choice of fracturing fluid can result in significant challenges for coal bed methane exploitation, including damage to ... -
Introduction of Novel Process for Sweetening of Sour Crude Oil: Optimization of Process
(The American Society of Mechanical Engineers (ASME), 2017)The subject of this experimental report is the application of nanoparticles in petroleum refining. Sulfur removal from petroleum using carbon nanotubes is considered in this study. The properties related to the process ... -
Use of Clustered Covariance and Selective Measurement Data in Ensemble Smoother for Three-Dimensional Reservoir Characterization
(The American Society of Mechanical Engineers (ASME), 2017)History matching is essential for estimating reservoir performances and decision makings. Ensemble Kalman filter (EnKF) has been researched for inverse modeling due to lots of advantages such as uncertainty quantification, ...