Journal of Heat Transfer: Recent submissions
Now showing items 3341-3360 of 3611
-
Direct Numerical Simulation of Condensing Stratified Flow
(The American Society of Mechanical Engineers (ASME), 2008)The paper discusses the results of a detailed direct numerical simulation study of condensing stratified flow, involving a sheared steam-water interface under various thermal and turbulent conditions. ... -
Heat Transfer Enhancement of Air Flowing Across Grooved Channels: Joint Effects of Channel Height and Groove Depth
(The American Society of Mechanical Engineers (ASME), 2008)A numerical study was conducted to investigate convective heat transfer and laminar fluid flow in the developing region of two-dimensional parallel-plate channels with arrays of transverse ... -
Experimental Study and Model on Critical Heat Flux of Refrigerant-123 and Water in Microchannels
(The American Society of Mechanical Engineers (ASME), 2008)The present work is aimed toward understanding the effect of flow boiling stability on critical heat flux (CHF) with Refrigerant 123 (R-123) and water in microchannel passages. Experimental data ... -
Erratum: “Optimally Staggered Finned Circular and Elliptic Tubes in Turbulent Forced Convection” [Journal of Heat Transfer, 2007, 129(5), pp. 674–678]
(The American Society of Mechanical Engineers (ASME), 2008)The original paper reported a heat transfer gain of up to 80% of the optimized elliptical tubes arrangement with respect to the optimized circular one. In fact, the actual heat transfer gain ... -
An Experimental Study of Effective Thermal Conductivity of High Temperature Insulations
(The American Society of Mechanical Engineers (ASME), 2008)An experimental apparatus was designed and fabricated to measure the effective thermal conductivities and simulate the temperature and pressure history of reentry of a launch vehicle into a ... -
Studies on Optimum Distribution of Fins in Heat Sinks Filled With Phase Change Materials
(The American Society of Mechanical Engineers (ASME), 2008)This paper deals with phase change material (PCM), used in conjunction with thermal conductivity enhancer (TCE), as a means of thermal management of electronic systems. Eicosane is used as PCM, ... -
Discussion: “Effects of Various Parameters on Nanofluid Thermal Conductivity” (Jang, S. P., and Choi, S. D. S., 2007, ASME J. Heat Transfer, 129, pp. 617–623)
(The American Society of Mechanical Engineers (ASME), 2008)In a series of articles, Jang and Choi (1-3) listed and explained their effective thermal conductivity (keff) model for nanofluids. For example, in the 2004 article (1), they constructed a ... -
Tomography-Based Determination of the Effective Thermal Conductivity of Fluid-Saturated Reticulate Porous Ceramics
(The American Society of Mechanical Engineers (ASME), 2008)The effective thermal conductivity of reticulate porous ceramics (RPCs) is determined based on the 3D digital representation of their pore-level geometry obtained by high-resolution multiscale ... -
Numerical Investigation on the Effects of Pressure Drop on Thermal Behavior of Porous Burners
(The American Society of Mechanical Engineers (ASME), 2008)This article aims to study the effect of pressure drop on the thermal behavior of porous burners. Since the reticulated ceramics are used in the burners’ construction, in the previous researches ... -
Heat Transfer During Compression and Expansion of Gas
(The American Society of Mechanical Engineers (ASME), 2008)Heat transfer during compression and expansion of gas is investigated to obtain a correlation that is easy to use in the design of the reciprocating energy conversion machines. We carried out ... -
Critical Analysis of the Available Ammonia Horizontal In-Tube Flow Boiling Heat Transfer Correlations for Liquid Overfeed Evaporators
(The American Society of Mechanical Engineers (ASME), 2008)The aim of this work is to present a critical examination of both the available experimental data and the performance of the available heat transfer correlations for oil-free ammonia horizontal ... -
Numerical Study of Dielectric Fluid Bubble Behavior Within Diverging External Electric Fields
(The American Society of Mechanical Engineers (ASME), 2008)A three-dimensional mathematical model is presented that models bubble deformation of a dielectric fluid due to the presence of a nonuniform electric field and calculates the net dielectrophoretic ... -
Heat-Transfer Analysis of High Porosity Open-Cell Metal Foam
(The American Society of Mechanical Engineers (ASME), 2008)Forced convection heat transfer in high porosity metal foam, either attached to an isothermal surface or confined between two isothermal plates, has been analyzed, assuming a repetitive simple ... -
Experimental Validation of Analytical Solutions for Vertical Flat Plate of Finite Thickness Under Natural-Convection Cooling
(The American Society of Mechanical Engineers (ASME), 2008)The analytical solution for a vertical heated plate subjected to conjugate heat transfer due to natural convection at the surface and conduction below is presented. The heated surface is split ... -
A Fast and Efficient Method for Predicting Fluid Flow and Heat Transfer Problems
(The American Society of Mechanical Engineers (ASME), 2008)A fast and efficient method based on the proper orthogonal decomposition (POD) technique for predicting fluid flow and heat transfer problems is proposed in this paper. POD is first applied ... -
Experimental and Numerical Study of One, Two, and Three Embedded Needle Cryoprobes Simultaneously Operated by High Pressure Argon Gas
(The American Society of Mechanical Engineers (ASME), 2008)One, two, and three needle cryoprobes, 1.47mm outside diameter, simultaneously and uniformly operated by high pressure argon gas, were tested in a gel simulating the thermal properties of ... -
Finite Element Simulation on Natural Convection Flow in a Triangular Enclosure Due to Uniform and Nonuniform Bottom Heating
(The American Society of Mechanical Engineers (ASME), 2008)A penalty finite element analysis with biquadratic elements has been carried out to investigate natural convection flows within an isosceles triangular enclosure with an aspect ratio of 0.5. Two ... -
An Atomistic Simulation Study of the Role of Asperities and Indentations on Heterogeneous Bubble Nucleation
(The American Society of Mechanical Engineers (ASME), 2008)Heterogeneous bubble nucleation was studied on surfaces having nanometer scale asperities and indentations as well as different surface-fluid interaction energies. Nonequilibrium molecular dynamics ... -
Measurements of Three-Dimensional Flow in Microchannel With Complex Shape by Micro-Digital-Holographic Particle-Tracking Velocimetry
(The American Society of Mechanical Engineers (ASME), 2008)High time-resolution flow field measurement in two microchannels with a complex shape is performed by a micro-digital-holographic particle-tracking velocimetry (micro-DHPTV). The first microchannel ... -
Experimental Investigation of Turbulent Convective Heat Transfer and Pressure Loss of Alumina/Water and Zirconia/Water Nanoparticle Colloids (Nanofluids) in Horizontal Tubes
(The American Society of Mechanical Engineers (ASME), 2008)The turbulent convective heat transfer behavior of alumina (Al2O3) and zirconia (ZrO2) nanoparticle dispersions in water is investigated experimentally in a flow loop with a horizontal tube test ...