• Login
    View Item 
    •   DSpace Home
    • ASME
    • Journal of Heat Transfer
    • View Item
    •   DSpace Home
    • ASME
    • Journal of Heat Transfer
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Experimental and Numerical Study of One, Two, and Three Embedded Needle Cryoprobes Simultaneously Operated by High Pressure Argon Gas

    Thumbnail
    View/Open
    JHTRAO-27833#032301_1.pdf (2.655Mb)
    Date
    2008
    Author
    Z. Magalov
    A. Shitzer
    D. Degani
    Metadata
    Show full item record
    Abstract
    One, two, and three needle cryoprobes, 1.47mm outside diameter, simultaneously and uniformly operated by high pressure argon gas, were tested in a gel simulating the thermal properties of biological tissues. The probes were inserted into the same depth in the gel through two parallel templates with holes drilled on a 5×5mm2 mesh. The temperature of the active segment of the probe was monitored by a single soldered thermocouple (TC). Temperatures in the gel were monitored by K-type TC strings in the radial, and in the downward and upward axial directions. The phase-change problem in the gel was solved by ANSYS7.0 , based on the enthalpy method. Calculated and measured results compared reasonably well with the most deviations observed in the upward axial direction. Results of this study may be summarized as follows: (a) Due to the cylindrical structure of the probe, the advancement of the frozen fronts was more pronounced in the upward axial and the radial directions than in the downward direction. (b) The farthest placement of the two probes (10mm) yielded the largest volumes enclosed by the isothermal contours. (c) In the tightest two placement configurations of the three probes, the −40°C fronts of all frozen lumps have joined together even after 1min of operation, while in the less tight configurations, joining occurred later. (d) In multiprobe applications and for a given duration of application, there exists a certain placement configuration that will produce the maximal volume of any temperature-specific frozen lump. The computational tool presented in this study could assist the surgeon in the preplanning of cryosurgical procedures and thus reduce uncertainties and enhance its success rate.
    URI
    http://yetl.yabesh.ir/yetl/handle/yetl/138587
    Collections
    • Journal of Heat Transfer

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV