Journal of Structural Engineering: Recent submissions
Now showing items 4641-4660 of 10765
-
Scaling Earthquake Ground Motions for Performance-Based Assessment of Buildings
(American Society of Civil Engineers, 2011)The impact of alternate ground-motion scaling procedures on the distribution of displacement responses in simplified structural systems is investigated. Recommendations are provided for selecting and scaling ground motions ... -
Verification of Nondimensional Energy Spectrum-Based Blast Design for Reinforced Concrete Members through Actual Blast Tests
(American Society of Civil Engineers, 2010)A method has been developed for the design of reinforced concrete (RC) members when subjected to blast loadings based on the nondimensional energy spectrum. Numerical analyzes showed good agreement between the approximate ... -
Structural Art and the Example of Félix Candela
(American Society of Civil Engineers, 2010) -
Ultimate Wind Load Design Gust Wind Speeds in the United States for Use in ASCE-7
(American Society of Civil Engineers, 2010)This paper presents an overview of the approach employed in the development of the wind speed maps for use in ASCE 7-10. The reason for a reduction in the wind speeds in the new standard as compared to those given in the ... -
Analytical Studies of Concrete-Filled Circular Steel Tubes under Axial Compression
(American Society of Civil Engineers, 2010)This paper describes a numerical program to analyze the behavior of the concrete-filled steel tubular (CFT) stub columns, and predict various modes of lateral interactions between steel tube and filled-in-concrete under ... -
Krylov Subspace Accelerated Newton Algorithm: Application to Dynamic Progressive Collapse Simulation of Frames
(American Society of Civil Engineers, 2010)An accelerated Newton algorithm based on Krylov subspaces is applied to solving nonlinear equations of structural equilibrium. The algorithm uses a low-rank least-squares analysis to advance the search for equilibrium at ... -
Simplified Procedure for Seismic Evaluation of Piles with Partial-Moment Connection to the Deck in Marine Oil Terminals
(American Society of Civil Engineers, 2010)This paper presents development of a simplified procedure for seismic evaluation of piles with partial-moment connection typically used in marine oil terminals. The current seismic evaluation procedure of the piles in ... -
Shear Capacity of the Flange-Web Intersections of Brick Masonry Nonrectangular Sections
(American Society of Civil Engineers, 2010)The monolithic structural action of various types of walls of flanged cross section and walls with engaged stiffeners or returns (nonrectangular sections) is critically dependent on the shear capacity of the interface ... -
Effects of Large Cumulative Travel on the Behavior of Lead-Rubber Seismic Isolation Bearings
(American Society of Civil Engineers, 2010)Lead-rubber bearings are seismic isolators that have been used extensively to protect buildings, bridges, and mission-critical infrastructure from the damaging effects of earthquake shaking. In bridges, lead-rubber bearings ... -
Simplified Damage Assessment Method for Buried Structures against External Blast Load
(American Society of Civil Engineers, 2010)Decoupling of soil-structure interaction is applied to analyze buried structure damage due to external blast load. The structural element under analysis is assumed to deform as a simply supported rigid-plastic beam. Shear ... -
Finite-Element Model for Pretensioned Prestressed Concrete Girders
(American Society of Civil Engineers, 2010)This paper presents a nonlinear model for pretensioned prestressed concrete girders. The model consists of three main components: a beam-column element that describes the behavior of concrete, a truss element that describes ... -
Wind Effects on Low-Rise Metal Buildings: Database-Assisted Design versus ASCE 7-05 Standard Estimates
(American Society of Civil Engineers, 2010)Peak bending moments are compared for a set of steel portal frames of industrial buildings in an open terrain calculated using database-assisted design (DAD) techniques and ASCE 7-05 Standard plots. The comparisons indicate ... -
Simplified Method for the Seismic Analysis of Masonry Shear-Wall Buildings
(American Society of Civil Engineers, 2010)In this paper, an improved version of a simplified method to assess lateral shear forces attracted by shear walls of regular, low-rise masonry structures is presented. This simplified method for seismic analysis (SMSA) is ... -
Cyclic Behavior of Shear Links of Various Grades of Plate Steel
(American Society of Civil Engineers, 2010)Plate steel shear links offer enhanced design freedom, including the ability to use steel grades that are not available in rolled shapes. This paper discusses the cyclic response of five types of shear links designed using ... -
Effect of Fabric Webs on the Static Response of Spindle-Shaped Tensairity Columns
(American Society of Civil Engineers, 2010)Tensairity is a lightweight structural concept comprising struts and cables stabilized by a textile membrane which is inflated by low pressurized air. This paper addresses the effect of fabric webs inside the membrane hull ... -
Characterization of a Roller Seismic Isolation Bearing with Supplemental Energy Dissipation for Highway Bridges
(American Society of Civil Engineers, 2010)A new roller seismic isolation bearing is developed for use in highway bridges. This new bearing uses rolling of cylindrical rollers on V-shaped sloping surfaces to achieve seismic isolation. The bearing is characterized ... -
Acceleration Tracking Performance of the UCSD-NEES Shake Table
(American Society of Civil Engineers, 2010)The main objective of this paper is to investigate the tracking (signal reproduction) capability of the UCSD-NEES shake table system through a series of broadband and harmonic experiments with different tuning and test ... -
Tracking Error-Based Servohydraulic Actuator Adaptive Compensation for Real-Time Hybrid Simulation
(American Society of Civil Engineers, 2010)Real-time hybrid simulation combines experimental testing and numerical simulation by dividing a structural system into experimental and analytical substructures. Servohydraulic actuators are typically used in a real-time ... -
Combined Distortional and Overall Flexural-Torsional Buckling of Cold-Formed Stainless Steel Sections: Experimental Investigations
(American Society of Civil Engineers, 2010)This paper presents a series of 48 full-scale tests on press-braked stainless steel lipped channel section columns subjected to concentric compression. The tests were carried out between fixed ends in the Structures ... -
Effect of Wall Flexibility on Dynamic Response of Concrete Rectangular Liquid Storage Tanks under Horizontal and Vertical Ground Motions
(American Society of Civil Engineers, 2010)In this study, the finite-element method is used to investigate the seismic behavior of rectangular liquid tanks in two-dimensional space. This method is capable of considering both impulsive and convective responses of ...