Journal of Structural Engineering: Recent submissions
Now showing items 4661-4680 of 10765
-
Decomposition and Effects of Pulse Components in Near-Field Ground Motions
(American Society of Civil Engineers, 2010)Long-period pulse components in near-field ground motions have been known to cause significant damage to flexible structures. In this paper, an empirical mode decomposition (EMD) approach is used to identify and separate ... -
Adaptive Harmony Search Method for Structural Optimization
(American Society of Civil Engineers, 2010)This paper presents an adaptive harmony search algorithm for solving structural optimization problems. The harmony memory considering rate and pitch adjusting rate are conceived as the two main parameters of the technique ... -
Experimental Analysis of Reinforced Concrete Block Masonry Walls Subjected to In-Plane Cyclic Loading
(American Society of Civil Engineers, 2010)An innovative system for reinforced concrete masonry walls based on the combination of vertical and horizontal trussed reinforcement is proposed. The mechanical characterization of the seismic behavior of such reinforced ... -
Unified Element and Section Approach to Design of Cold-Formed Steel Structures
(American Society of Civil Engineers, 2010)Slender open-section cold-formed steel members that contain flanges with edge stiffeners may buckle in different modes and with mode interactions. The element design approach (effective width method) has been shown to ... -
LRFD Factors for Pultruded Wide-Flange Columns
(American Society of Civil Engineers, 2010)Fiber-reinforced polymer (FRP) pultruded profiles are produced by a number of manufacturers worldwide in similar, but nonstandard, wide-flange, I, angle, and tubular profiles. At present there is no American National ... -
Stress-Strain Behavior of Concrete in Hybrid FRP-Concrete-Steel Double-Skin Tubular Columns
(American Society of Civil Engineers, 2010)Hybrid fiber-reinforced polymer (FRP) concrete-steel double-skin tubular columns are a new form of hybrid columns recently proposed by the second writer. The new column consists of an inner steel tube and an outer FRP tube, ... -
Simple Plastic Model for Shear Critical SFRC Beams
(American Society of Civil Engineers, 2010)A simple physical model, for prediction of ultimate shear strength of steel fiber-reinforced concrete (SFRC) beams is developed on the basis of a plastic approach originally proposed for reinforced concrete beams without ... -
Finite-Element Modeling of Short-Term Field Response of Composite Wood-Concrete Floors/Decks
(American Society of Civil Engineers, 2010)A finite-element model (FEM) is developed to predict the load-displacement behavior of a composite wood-concrete floor/deck system under short-term loading. The interlayer connection was modeled with link elements dedicated ... -
Safety of Structures in Strong Winds and Earthquakes: Multihazard Considerations
(American Society of Civil Engineers, 2010)In accordance with the ASCE Standard 7-05, in regions subjected to wind and earthquakes, structures are designed for loads induced by wind and, separately, by earthquakes, and the final design is based on the more demanding ... -
Displacement Method for the Long-Term Analysis of Steel-Concrete Beams with Flexible Connection
(American Society of Civil Engineers, 2010)The long-term behavior in the service stage of continuous composite steel-concrete beams with deformable connectors subjected to uniaxial bending and axial load is presented. The problem is dealt with by recurring to the ... -
Discussion of “Nonlinear Uniaxial Material Model for Reinforcing Steel Bars” by Sashi K. Kunnath, YeongAe Heo, and Jon F. Mohle
(American Society of Civil Engineers, 2010) -
Large-Scale Experimental Study of Precast Segmental Unbonded Posttensioned Concrete Bridge Columns for Seismic Regions
(American Society of Civil Engineers, 2010)The seismic behavior of the proposed precast segmental unbonded posttensioned concrete bridge columns for use in regions of high seismicity was investigated experimentally. Posttensioning tendons were placed in the hollow ... -
Development and Validation of 3D Composite Structural Elements at Elevated Temperatures
(American Society of Civil Engineers, 2010)A three-dimensional (3D) eight-noded brick element, which is capable of representing the performance of composite structures subjected to 3D stress conditions at ambient and high temperatures, has been developed and ... -
Discussion of “Quantitative Comparison of Optimization Approaches for the Design of Supplemental Damping in Earthquake Engineering Practice” by Robert Levy and Oren Lavan
(American Society of Civil Engineers, 2010) -
Experimental Seismic Response of a Full-Scale Light-Frame Wood Building
(American Society of Civil Engineers, 2010)A full-scale, two-story, light-frame wood townhouse building, designed according to modern U.S. engineered seismic design requirements, was tested on two triaxial shake tables operating in unison. The main objective of ... -
Fragility Analysis and Seismic Record Selection
(American Society of Civil Engineers, 2011)This paper explores the influence of spectrum-matched and amplitude-scaled ground motions on the development of fragility functions for structures. The quantification of the influence of these two types of ensembles on ... -
Fire Design of Timber-Concrete Composite Slabs with Screwed Connections
(American Society of Civil Engineers, 2010)The structural behavior of timber-concrete composite slabs is mainly governed by the shear connection between timber and concrete. When a timber-concrete composite structure is exposed to fire, it is of particular importance ... -
Parallel Axial-Flexural Hinge Model for Nonlinear Dynamic Progressive Collapse Analysis of Welded Steel Moment Frames
(American Society of Civil Engineers, 2010)In this study, a parallel axial-flexural hinge model capable of representing postyield flexural behavior and considering interaction effects of axial force and moment is proposed for a simplified nonlinear progressive ... -
Accounting for Ground-Motion Spectral Shape Characteristics in Structural Collapse Assessment through an Adjustment for Epsilon
(American Society of Civil Engineers, 2011)One of the challenges of assessing structural collapse performance is the appropriate selection of ground motions for use in the nonlinear dynamic collapse simulation. The ground motions should represent characteristics ... -
Finite-Element Analysis of Fluid-Structure Interaction in a Blast-Resistant Window System
(American Society of Civil Engineers, 2010)This paper describes the development of a finite-element model capable of representing a blast-resistant flexible window (flex window) system developed by the Air Force Research Laboratory/Airbase Technologies Division. ...