Journal of Structural Engineering: Recent submissions
Now showing items 4681-4700 of 10765
-
Editor’s Note
(American Society of Civil Engineers, 2009) -
Discussion of “Long-Term Behavior of Prestressed Composite Beams at Service Loads for One Year” by Weichen Xue, Min Ding, Chi He, and Jie Li
(American Society of Civil Engineers, 2009) -
Damage Identification in a Truss Tower by Regularized Model Updating
(American Society of Civil Engineers, 2010)This paper presents a sensitivity-based damage identification of a three-dimensional truss tower tested in the laboratory. A finite-element model is updated by modal parameters obtained from ambient vibration measurements. ... -
Reviewers
(American Society of Civil Engineers, 2009) -
Behavior of Hollow Tubular-Flange Girder Systems for Curved Bridges
(American Society of Civil Engineers, 2010)This paper describes research results for an innovative curved highway bridge girder system, which uses I-shaped steel girders with hollow rectangular tubes as flanges. The increased torsional stiffness provided by the ... -
Delay Correlation of Mechanical Hysteresis and Damping
(American Society of Civil Engineers, 2010)This paper presents a procedure for calculating the effective equivalent structural properties (stiffness and damping) of hysteretic systems from the time histories of their dynamic response. The method is based on the ... -
Local Buckling of Fire-Exposed Aluminum Members: New Design Model
(American Society of Civil Engineers, 2010)Design models for local buckling of fire-exposed aluminum sections are currently lacking. Based on analyses with validated finite-element models, this paper investigates local buckling of extruded sections with stress-strain ... -
Tornado-Induced Wind Loads on a Low-Rise Building
(American Society of Civil Engineers, 2010)Current design wind loads for buildings and other structures are based upon model tests in low-speed boundary-layer wind tunnels that generate straight-line winds. Winds resulting from tornadoes that can occur during extreme ... -
Stability Capacity and Lateral Bracing Requirements of Wood Beam-Columns
(American Society of Civil Engineers, 2010)This paper presents a study on the stability capacity and lateral bracing requirements of wood beam-columns subjected to biaxial eccentric compression loads. Material property tests and wood beam-column tests were conducted ... -
Editor’s Note
(American Society of Civil Engineers, 2009) -
Near-Fault and Far-Field Strong Ground-Motion Simulation for Earthquake Engineering Applications Using the Specific Barrier Model
(American Society of Civil Engineers, 2011)Codes for aseismic design may require use of recorded ground motions as input in dynamic analysis. When records are not available, motions must be simulated. The specific barrier model (SBM) is particularly useful in this ... -
Moment Redistribution in Continuous Steel-Concrete Composite Beams with Compact Cross Section
(American Society of Civil Engineers, 2010)The paper investigates the design of continuous steel-concrete composite beams with compact cross section using the elastic analysis with limited redistribution. The permissible moment redistribution which satisfies the ... -
Probabilistic Seismic Loss Assessment of a Vancouver High-Rise Building
(American Society of Civil Engineers, 2010)A seismic loss curve of a real-world building is obtained by means of state-of-the-art models for the impending ground motion, the structure, the damage of structural and nonstructural components, and the ensuing losses. ... -
Closure to “Long-Term Behavior of Prestressed Composite Beams at Service Loads for One Year” by Weichen Xue, Min Ding, Chi He, and Jie Li
(American Society of Civil Engineers, 2009) -
Design Input Motion Synthesis Considering the Effect of Uncertainty in Structural and Seismic Parameters by Feature Indexes
(American Society of Civil Engineers, 2011)Various aspects of earthquakes and structures have inherent uncertainty, and this consideration is essential for seismic design. It makes the input ground-motion selection for seismic design a difficult task, especially ... -
Load-History Effects on Deformation Capacity of Flexural Members Limited by Bar Buckling
(American Society of Civil Engineers, 2010)Buckling of reinforcement is one of the possible phenomena that limit the deformation capacity of reinforced concrete members under reversed cyclic loading. Previous experimental research suggests that occurrence of buckling ... -
Discussion of “Mechanics and Slenderness Limits of Sway-Restricted Reinforced Concrete Columns” by Jostein Hellesland
(American Society of Civil Engineers, 2009) -
Three-Dimensional Seismic Response of a Full-Scale Light-Frame Wood Building: Numerical Study
(American Society of Civil Engineers, 2010)The experimental seismic responses of a full-scale two-story light-frame wood townhouse building, designed to modern U.S. engineered seismic design requirements, were compared against the predictions of a new software ... -
Editor’s Note
(American Society of Civil Engineers, 2009) -
Closure to “Mechanics and Slenderness Limits of Sway-Restricted Reinforced Concrete Columns” by Jostein Hellesland
(American Society of Civil Engineers, 2009)