Journal of Structural Engineering: Recent submissions
Now showing items 4481-4500 of 10765
-
Seismic Collapse Safety of Reinforced Concrete Buildings. I: Assessment of Ductile Moment Frames
(American Society of Civil Engineers, 2011)This study applies nonlinear dynamic analyses to assess the risk of collapse of RC special moment-frame (SMF) buildings to quantify the seismic safety implied by modern building codes. Thirty archetypical RC SMF buildings, ... -
Real-Time Hybrid Simulation Using Shake Tables and Dynamic Actuators
(American Society of Civil Engineers, 2011)The development and implementation of the real-time hybrid simulation (RTHS), a seismic response simulation method with a combination of numerical computation and physical specimens excited by shake tables and auxiliary ... -
Discussion of “Tornado-Induced Wind Loads on a Low-Rise Building” by F. L. Haan Jr., Vasanth Kumar Balaramudu, and P. P. Sarkar
(American Society of Civil Engineers, 2011) -
Cyclic Loading Test for Reinforced Concrete Frame with Thin Steel Infill Plate
(American Society of Civil Engineers, 2011)An experimental study was performed to investigate the cyclic behavior of walls that are composed of reinforced concrete boundary frames and thin steel infill plates. For this purpose, three-story steel plate infilled walls ... -
Direct Strength Method for Design of Cold-Formed Steel Columns with Holes
(American Society of Civil Engineers, 2011)In this paper, design expressions are derived that extend the American Iron and Steel Institute (AISI) direct strength method (DSM) to cold-formed steel columns with holes. For elastic buckling-controlled failures, column ... -
Structural Response of Corroded, Unbonded Posttensioned Beams
(American Society of Civil Engineers, 2011)This paper presents the development of models and the analytical study of the structural response of deteriorating unbonded posttensioned beams, with the aim of providing suitable tools for the evaluation of existing ... -
Performance of Conventionally Reinforced Coupling Beams Subjected to Cyclic Loading
(American Society of Civil Engineers, 2011)The behavior of coupled-wall buildings primarily depends on the performance of coupling beams. Existing coupled-wall buildings designed and built prior to the 1970s contain coupling beams reinforced with horizontal and ... -
Reviewers
(American Society of Civil Engineers, 2010) -
Structural Analysis of Compression Deformation and Failure of Aluminum in Fire
(American Society of Civil Engineers, 2011)This paper presents a finite-element (FE) modeling approach to predict the deformation, softening, and failure of compression-loaded aluminum structures exposed to fire. A fully coupled thermal-mechanical FE model is ... -
Modal-Pushover-Based Ground-Motion Scaling Procedure
(American Society of Civil Engineers, 2011)Earthquake engineering is increasingly using nonlinear response history analysis (RHA) to demonstrate the performance of structures. This rigorous method of analysis requires selection and scaling of ground motions appropriate ... -
Accidental Eccentricity of Story Shear for Low-Rise Office Buildings
(American Society of Civil Engineers, 2011)This paper presents the results of a Monte Carlo simulation study on accidental eccentricity of low-rise office buildings. The study incorporates results of a live-load survey in several office buildings in Mexico City. ... -
Seismic Design and Behavior of Ductile Knee-Braced Moment Frames
(American Society of Civil Engineers, 2011)The design and behavior of a ductile structural system called a knee-braced moment frame (KBMF) are presented in this paper. The design of this structural system is based on a capacity-design concept that results in ductile ... -
Application of Indirect Capacity Design Principles for Seismic Design of Steel-Plate Shear Walls
(American Society of Civil Engineers, 2011)This paper presents a capacity design procedure that aims to achieve good seismic performance for steel-plate shear walls and improve the overall economy of the system. The proposed method uses indirect capacity design ... -
Use of Lifetime Functions in the Optimization of Nondestructive Inspection Strategies for Bridges
(American Society of Civil Engineers, 2011)A model using lifetime functions is used to evaluate the probability of survival of bridge components. The possible outcomes associated with nondestructive inspections (NDIs) are incorporated in an event-tree model. Each ... -
Dimensional Response Analysis of Bilinear Systems Subjected to Non-pulselike Earthquake Ground Motions
(American Society of Civil Engineers, 2011)The maximum inelastic response of bilinear single-degree-of-freedom (SDOF) systems when subjected to ground motions without distinguishable pulses is revisited with dimensional analysis by identifying timescales and length ... -
Analytical Assessment of the Effect of Vertical Earthquake Motion on RC Bridge Piers
(American Society of Civil Engineers, 2011)This paper presents analytical assessment of the effect of vertical earthquake ground motion on RC bridge piers. A bridge structure damaged during the Northridge Earthquake and a Federal Highway concept bridge design are ... -
Cellular Finite Beam Element for Nonlinear Analysis of Concrete Structures under Fire
(American Society of Civil Engineers, 2011)A novel approach to nonlinear finite-element analysis of concrete structures exposed to fire is presented. The proposed formulation refers to frame systems, but it can be extended to other types of structures. The main ... -
Residual Drift Response of SMRFs and BRB Frames in Steel Buildings Designed according to ASCE 7-05
(American Society of Civil Engineers, 2011)A recent study has shown that residual drifts after earthquakes that are greater than 0.5% in buildings may represent a complete loss of the structure from an economic perspective. To study the comparative residual drift ... -
SANISTEEL: Simple Anisotropic Steel Plasticity Model
(American Society of Civil Engineers, 2011)A simple constitutive model for the inelastic response of steel under monotonic and random cyclic loading conditions is developed within the framework of bounding surface plasticity. The particular feature that distinguishes ... -
System Identification Study of a 7-Story Full-Scale Building Slice Tested on the UCSD-NEES Shake Table
(American Society of Civil Engineers, 2011)A full-scale 7-story reinforced concrete building slice was tested on the unidirectional University of California–San Diego Network for Earthquake Engineering Simulation (UCSD-NEES) shake table during the period from October ...