Journal of Structural Engineering: Recent submissions
Now showing items 4461-4480 of 10765
-
Amplitude-Scaled versus Spectrum-Matched Ground Motions for Seismic Performance Assessment
(American Society of Civil Engineers, 2011)The need to consider only a small number of ground motions combined with the complexities of response sensitivity to both modeling choices and ground motion variability calls for an assessment of current ground motion ... -
Displacement-Based Method of Analysis for Regular Reinforced-Concrete Wall Buildings: Application to a Full-Scale 7-Story Building Slice Tested at UC–San Diego
(American Society of Civil Engineers, 2011)This paper describes a displacement-based method of analysis for the performance-based seismic design of regular buildings with reinforced-concrete bearing walls acting as the lateral-force resisting system. The method ... -
Dynamic Stress Amplification Caused by Sudden Failure of Tension Members in Steel Truss Bridges
(American Society of Civil Engineers, 2011)The property of dynamic stress amplification resulting from the sudden failure of a tension member in a truss bridge is investigated by a precise dynamic response analysis. The primary sources of the dynamic stress ... -
Closure to “Response of Restrained Concrete Beams under Design Fire Exposure” by M. B. Dwaikat and V. K. R. Kodur
(American Society of Civil Engineers, 2011) -
Experimental Research on Fatigue Behavior of RC Beams Strengthened with Steel Plate-Concrete Composite Technique
(American Society of Civil Engineers, 2011)Based on fatigue experiments on eight reinforced concrete (RC) beams strengthened with the steel plate-concrete composite (SPCC) technique, the fatigue life and development trend of stiffness and strain of specimens under ... -
Editor’s Note
(American Society of Civil Engineers, 2011) -
Design and Measured Behavior of a Hybrid Precast Concrete Wall Specimen for Seismic Regions
(American Society of Civil Engineers, 2011)This paper presents the measured behavior from the testing of a 0.4-scale “hybrid” precast concrete wall specimen under reversed-cyclic lateral loading and provides an assessment of the seismic design and analysis of the ... -
Generation of Uniform-Hazard Earthquake Ground Motions
(American Society of Civil Engineers, 2011)This paper presents statistical models for the generation of biaxial earthquake ground-motion time histories with spectra that match those from samples of ground-motion records. The model parameters define near-field ... -
Cyclic Flexural Testing of Concentrically Braced Frame Beam-Column Connections
(American Society of Civil Engineers, 2011)This research investigates the cyclic flexural behavior and performance of concentrically braced frame beam-column connections in the context of evaluating the reserve lateral load-resisting capacity in concentrically ... -
Shake-Table Test of a Full-Scale 7-Story Building Slice. Phase I: Rectangular Wall
(American Society of Civil Engineers, 2011)This paper is a companion to “Displacement-Based Method of Analysis for Regular Reinforced-Concrete Wall Buildings: Application to a Full-Scale 7-Story Building Slice Tested at UC–San Diego” and presents key results obtained ... -
Buckling of Laminated Glass Elements in Compression
(American Society of Civil Engineers, 2011)Monolithic and laminated glass beams or panes are frequently adopted as structural elements in modern and innovative architectural applications. Several aspects related to the load-carrying behavior of these new construction ... -
Along-Wind Aero-Elasticity of High-Rise Buildings by Using Indirect Forced Actuation Technique
(American Society of Civil Engineers, 2011)The frequency-dependent aerodynamic damping and stiffness of high-rise buildings in along-wind motion have been systematically investigated and compared through wind tunnel tests under smooth wind flow. A novel identification ... -
High-Force-to-Volume Seismic Dissipators Embedded in a Jointed Precast Concrete Frame
(American Society of Civil Engineers, 2012)An experimental and computational study of an 80-percent scale precast concrete 3D beam-column joint subassembly designed with high force-to-volume (HF2V) dampers and damage-protected rocking connections is presented. A ... -
Parametric Statistical Generalization of Uniform-Hazard Earthquake Ground Motions
(American Society of Civil Engineers, 2011)Sets of ground-motion records used for seismic hazard analyses typically have intensity measures corresponding to a particular hazard level for a site (perhaps conditioned on a particular intensity value and hazard). In ... -
Instability of Axially Loaded Compression Members under Lateral Rigid Body Excitations
(American Society of Civil Engineers, 2011)The global compressive capacity of steel members subject to lateral rigid body dynamic excitation is examined numerically with a dynamic nonlinear finite-element analytical algorithm that uses the implicit Newmark- -
Methods to Improve Infilled Frame Ductility
(American Society of Civil Engineers, 2011)An experimental investigation was conducted to achieve engineered infilled frames in two stages. The first stage was aimed at discovering methods to raise infilled frames’ ductility, through testing six single-story ... -
Moment-Carrying Capacity of Dovetailed Mortise and Tenon Joints with or without Beam Shoulder
(American Society of Civil Engineers, 2011)This study aimed to evaluate the influence of beam shoulder on the moment-carrying capacity of traditional post-beam joints, dovetailed mortise, and tenon joints. The specimens were manufactured by a computer numerical ... -
Experimental and Analytical Investigation of Concrete Filled Steel Tubular Columns
(American Society of Civil Engineers, 2011)In this paper, an experimental and analytical investigation of concrete-filled steel tubular (CFST) laced columns is presented. These columns consist of four concrete-filled steel tubes that are laced together. A total of ... -
Finite Particle Method for Progressive Failure Simulation of Truss Structures
(American Society of Civil Engineers, 2011)A structural analysis framework called the finite particle method (FPM) for structure failure simulation is presented in this paper. The traditional finite-element method is generated from continuum mechanics and the ... -
Evaluation of the Torsional Response of Multistory Buildings Using Equivalent Static Eccentricity
(American Society of Civil Engineers, 2011)The equivalent static eccentricities of seismic forces are usually defined by building codes with simple expressions of the static eccentricity. The inelastic torsional response of multistory buildings using nonlinear ...