Journal of Structural Engineering: Recent submissions
Now showing items 4441-4460 of 10765
-
Cost-Based Optimum Scheduling of Inspection and Monitoring for Fatigue-Sensitive Structures under Uncertainty
(American Society of Civil Engineers, 2011)Inspection and monitoring of deteriorating structures are generally performed to assess structural integrity and predict the remaining service life. For deteriorating structures, a reliable prediction of damage occurrence ... -
Discussion of “Cyclic Behavior of Shear Links of Various Grades of Plate Steel” by Peter Dusicka, Ahmad M. Itani, and Ian G. Buckle
(American Society of Civil Engineers, 2012) -
Seismic Design and Performance of Steel Moment-Resisting Frames with Nonlinear Replaceable Links
(American Society of Civil Engineers, 2011)Although moment resisting frames (MRFs) designed according to the latest seismic codes can provide life safety during a design level earthquake, they are expected to sustain significant damage at flexural yielding locations ... -
Experimental Evaluation of Pretopped Precast Diaphragm Critical Flexure Joint under Seismic Demands
(American Society of Civil Engineers, 2011)Precast concrete diaphragm seismic response is examined in experimental research integrating model-based simulation with physical testing. The experimental substructure is the diaphragm critical flexural region of a prototype ... -
Comparative Response Assessment of Minimally Compliant Low-Rise Base-Isolated and Conventional Steel Moment-Resisting Frame Buildings
(American Society of Civil Engineers, 2011)In this study, the multihazard response of code-designed conventional and base-isolated steel frame buildings is evaluated using nonlinear response history analysis. The results of hazard and structural response analysis ... -
Nanoparticle Reinforced Polymer for Blast Protection of Unreinforced Masonry Wall: Laboratory Blast Load Simulation and Design Models
(American Society of Civil Engineers, 2011)This paper investigates the performance of a new generation of nanoparticle-reinforced polymeric materials as an alternative to fiber-reinforced polymer for the protection of masonry structures against blast loads. The ... -
Shear Strength Model for Steel Fiber Reinforced Concrete Beams without Stirrup Reinforcement
(American Society of Civil Engineers, 2011)A simple model is presented to estimate the shear strength of steel fiber reinforced concrete (FRC) beams without stirrup reinforcement. The model was developed on the basis of observations from tests of 27 large-scale ... -
Response of Arching Unreinforced Concrete Masonry Walls to Blast Loading
(American Society of Civil Engineers, 2011)New standards for blast protection of buildings are currently being developed in the United States and Canada. In this regard, both standards are considering unreinforced masonry (URM) walls as particularly vulnerable to ... -
Design for Block Shear of Coped Beams with a Welded End Connection
(American Society of Civil Engineers, 2011)This paper presents a numerical study of the block shear strength and behavior of coped beams with welded end connections. The finite-element (FE) method was employed to predict the structural behavior and block shear ... -
Measures of Circularity for Shell Structures
(American Society of Civil Engineers, 2011)Most design codes for circular shell structures include a limit on out-of-round imperfections. However, commonly used measures of out-of-roundness fail to identify shapes that have constant diameter but are not circular. ... -
Analysis of Shear-Critical Reinforced Concrete Plane Frame Elements under Cyclic Loading
(American Society of Civil Engineers, 2011)An analytical procedure was recently developed for the nonlinear analysis of reinforced concrete frame structures consisting of beams, columns, and shear walls under monotonic loading. The procedure is distinct from others ... -
Experimental Validation of Replaceable Shear Links for Eccentrically Braced Steel Frames
(American Society of Civil Engineers, 2011)In the current design of steel eccentrically braced frames (EBFs), the yielding link is coupled with the floor beam. This often results in oversized link elements, which leads to overdesigned structures and foundations. ... -
Nonlinear Analysis of Shear-Critical Reinforced Concrete Beams Using Fixed Angle Theory
(American Society of Civil Engineers, 2011)This paper proposes a solution methodology for the application of the fixed-angle theory to predict the shear response of reinforced concrete (RC) beams subjected to the combined actions of shear and flexure. The proposed ... -
Optimal Topological Design of Periodic Structures for Natural Frequencies
(American Society of Civil Engineers, 2011)This paper proposes a method for topology optimization of periodic structures on dynamic problems by using an improved bidirectional evolutionary structural optimization (BESO) technique. Frequency optimization and ... -
Numerical Models Validation of Cracked Square Hollow Section (SHS) Y- and K-Joints
(American Society of Civil Engineers, 2011)To validate the accuracy of finite-element models of cracked square hollow section (SHS) -
Strut-and-Tie Model Based on Crack Band Theory for Deep Beams
(American Society of Civil Engineers, 2011)A simplified strut-and-tie model including size effect based on the crack band theory is proposed to evaluate the shear capacity of deep beams. Concrete struts are idealized as uniformly tapered prismatic members with a ... -
Cold-Formed-Steel Oval Hollow Sections under Axial Compression
(American Society of Civil Engineers, 2011)A test program was performed on cold-formed-steel oval hollow sections under axial compression. The test specimens were cold-rolled into oval hollow sections with flat web plates and semicircular flanges. The test program ... -
Experimental and Analytical Performance Evaluation of Engineering Wood Encased Concrete-Steel Beam-Column Joints
(American Society of Civil Engineers, 2011)The seismic performance of engineering wood encased concrete-steel (EWECS) beam-column joints is investigated and reported within this paper. Experimental and analytical investigation was carried out on a total of two ... -
Risk Consistency and Synergy in Multihazard Design
(American Society of Civil Engineers, 2011)Current design procedures in the United States use the envelope of individual hazard demands on a structure to ensure safety against multiple hazards. A difficulty in multihazard design for wind and earthquake is that the ...