Journal of Structural Engineering: Recent submissions
Now showing items 4501-4520 of 10765
-
Stress-Block Parameters for Unconfined and Confined Concrete Based on a Unified Stress-Strain Model
(American Society of Civil Engineers, 2011)Equations to obtain equivalent rectangular stress-block parameters for unconfined and confined concrete are derived for rapid (hand) analysis and design purposes. To overcome a shortcoming of existing commonly used ... -
Can Stirrups Suppress Size Effect on Shear Strength of RC Beams?
(American Society of Civil Engineers, 2011)This paper demonstrates the size effect on the shear strength of reinforced concrete (RC) beams with stirrups and does so in two separate and independent ways: (1) by fracture mechanics, based on finite-element analysis ... -
Dynamic Analysis of Three-Dimensional Frames with Material and Geometric Nonlinearities
(American Society of Civil Engineers, 2011)The dynamic analysis of inelastic structures with geometric nonlinearities experiencing large deformations and buckling is challenging, in particular, if three-dimensional space effects are considered. This paper introduces ... -
Interlayer Influence on Timber-LWAC Composite Structures with Screw Connections
(American Society of Civil Engineers, 2011)Timber-concrete composite structures are often used as upgrade solutions for existent timber floors. The timber cross section is maintained and a concrete layer is poured over the floorboard surface. Floorboards help with ... -
Composite Wood-Concrete Beams Using Utility Poles: Time-Dependent Behavior
(American Society of Civil Engineers, 2011)This paper describes the behavior of wood-concrete composite beams in which the wood layer is composed of recycled utility poles. Two full-scale laboratory specimens of -
Out-of-Plane Free Vibration Analysis of a Horizontally Circular Curved Beam Carrying Arbitrary Sets of Concentrated Elements
(American Society of Civil Engineers, 2011)For convenience, a horizontally circular curved beam without any attachments is called a “bare” curved beam and the one carrying any attachments is called a “loaded” curved beam, in this paper. For the out-of-plane free ... -
Editor’s Note
(American Society of Civil Engineers, 2010) -
Constitutive Model for Cyclic Response of Structural Steels with Yield Plateau
(American Society of Civil Engineers, 2011)A rate-independent cyclic plasticity model for structural steels with a yield plateau is proposed. The model couples nonlinear kinematic hardening with a memory surface in the plastic strain space, to account for the ... -
Experimental Tests of Notched and Plate Connectors for LVL-Concrete Composite Beams
(American Society of Civil Engineers, 2011)This paper reports the experimental results of symmetrical push-out tests performed on notched and toothed metal plate connectors for laminated veneer lumber (LVL)-concrete composite floor systems. The characteristic shear ... -
Adaptive Compensation for Detuning in Pendulum Tuned Mass Dampers
(American Society of Civil Engineers, 2011)Detuning, resulting from deterioration, inadvertent changes to structure properties, and design forecasting, can lead to a significant loss of performance in tuned mass dampers (TMDs). To overcome this issue, an adaptive ... -
Review of Spatial Variation of Seismic Ground Motions: Modeling and Engineering Applications by Aspasia Zerva
(American Society of Civil Engineers, 2010) -
Local Buckling of Aluminum Alloy Angles under Uniform Compression
(American Society of Civil Engineers, 2011)Metal members are able to exhibit plastic deformations whose amplitude depends on the local slenderness of the plate elements constituting the member section, provided that global instabilities are prevented. This local ... -
Progressive Incremental Dynamic Analysis for First-Mode Dominated Structures
(American Society of Civil Engineers, 2011)Incremental dynamic analysis (IDA) is a widely used method for assessing structural performance under earthquake excitations. It enables direct evaluation of the record-to-record variability in structural response through ... -
Multistable Tensegrity Structures
(American Society of Civil Engineers, 2011)Tensegrity structures have been intensively studied since they appeared in the 1950s. Their applications have been extended from architecture to other areas including aerospace structures, cell mechanics, and robotics. In ... -
Multihinged Articulated Offshore Tower under Vertical Ground Excitation
(American Society of Civil Engineers, 2011)In this study, the response of a multihinged articulated offshore tower subjected to different seismic excitations in the presence of random waves was investigated. The study includes near-fault as well as far-fault ... -
Punching Shear Behavior of Externally Prestressed Concrete Slabs
(American Society of Civil Engineers, 2011)The use of externally post-tensioned fiber-reinforced concrete decks in highway bridge structures is seen as a viable option in the move toward the design and construction of high-performance structures. However, with the ... -
Wind Analysis of a Suspension Bridge: Identification and Finite-Element Model Simulation
(American Society of Civil Engineers, 2011)A framework for numerically predicting the wind-excited response of suspension bridges with a certain level of confidence is established by means of output only system identification, model updating, wind-response simulation, ... -
Cost-Effective Lifetime Structural Health Monitoring Based on Availability
(American Society of Civil Engineers, 2011)The state of a structural system subjected to deterioration processes is changing continuously. This state cannot be reliably predicted without considering both aleatory and epistemic uncertainties. To reduce the epistemic ... -
Experimental and Numerical Investigations of the Behavior of Flush End Plate Connections at Elevated Temperatures
(American Society of Civil Engineers, 2011)This paper reports on a set of test results on flush end plate connections at ambient and elevated temperatures. The experiments aimed to investigate the behavior of connections at the ends of unprotected beams in fire ... -
Retrofit of Deep Concrete Coupling Beams by a Laterally Restrained Side Plate
(American Society of Civil Engineers, 2011)The existing designs for deep reinforced-concrete (RC) coupling beams with low shear-span ratios and conventionally reinforced shear stirrups tend to fail in a brittle way with limited ductility and deformability under ...