Journal of Structural Engineering: Recent submissions
Now showing items 4161-4180 of 10765
-
Multiple Points-In-Time Estimation of Peak Wind Effects on Structures
(American Society of Civil Engineers, 2013)One of the problems encountered in the estimation of wind effects on high-rise structures is the development of combinations of wind-induced translational responses in possible conjunction with rotational responses and/or ... -
Development and Utilization of Structural Component Databases for Performance-Based Earthquake Engineering
(American Society of Civil Engineers, 2013)Performance-based earthquake engineering necessitates the development of reliable nonlinear analysis models that are able to simulate the behavior of structures from the onset of damage through collapse. These models provide ... -
Three-Dimensional Wharf Response to Far-Field and Impulsive Near-Field Ground Motions in Liquefiable Soils
(American Society of Civil Engineers, 2013)Seismic performance evaluation of wharf structures constitutes the core of the vulnerability assessment of seaport infrastructure exposed to seismic events. Because this performance will depend on complex interactions ... -
Patching Asymptotics Solution of a Cable with a Small Bending Stiffness
(American Society of Civil Engineers, 2013)The analysis of a cable with a small bending stiffness is a problem encountered in many engineering applications such as the fatigue assessment of stay cables, the modeling of pipeline laying operation, or the determination ... -
Internal Pressure in Real Flexible Porous Buildings with a Dominant Opening: Design Perspective
(American Society of Civil Engineers, 2013)Analytical and associated numerical investigations of the fluctuating internal pressures induced through a dominant opening in real buildings with leaky and flexible envelopes are undertaken. The damping effect of these ... -
Fillet Weld Groups Loaded with Out-of-Plane Eccentricity: Simulations and New Model for Strength Characterization
(American Society of Civil Engineers, 2013)The strength of fillet weld groups, loaded with an out-of-plane eccentricity, is controlled by complex interactions of weld yielding, as well as bearing between the connected parts. Current models that characterize connection ... -
Damage-Control Systems Using Replaceable Energy-Dissipating Steel Fuses for Cold-Formed Steel Structures: Seismic Behavior by Shake Table Tests
(American Society of Civil Engineers, 2013)A system that controls the rocking behavior of multistory shear walls is proposed as an innovative damage-control system for cold-formed steel structures. In this system, we have developed a new hold-down equipped with a ... -
Demonstration of Compatible Yielding between Soil-Foundation and Superstructure Components
(American Society of Civil Engineers, 2013)Although the nonlinear behavior of rocking shallow foundations has been experimentally and numerically demonstrated as an effective tool to dissipate vibrational energy during seismic loading, the engineering community has ... -
Accuracy of AISC Methods in Predicting Flexural Strength of Concrete-Encased Members
(American Society of Civil Engineers, 2013)This paper investigated the accuracy of the AISC analysis methods in determining flexural strength of concrete-encased members. Analytical results from analyses performed using the AISC methods and a proposed method were ... -
Comparative Studies of Semiactive Control Strategies for MR Dampers: Pure Simulation and Real-Time Hybrid Tests
(American Society of Civil Engineers, 2013)This paper presents comparisons of the performances of three semiactive control algorithms for use with multiple magnetorheological (MR) dampers. The three controllers are (1) the clipped-optimal controller, (2) the ... -
Cyclic Seismic Testing of Composite Concrete-Filled U-Shaped Steel Beam to H-Shaped Column Connections
(American Society of Civil Engineers, 2013)In this study, the cyclic seismic performance of a concrete-filled U-shaped steel beam to H-shaped steel column connections was experimentally evaluated. The concrete-filled U-shaped steel beams were compositely attached ... -
Proposal of a Design Model for Masonry Walls Subjected to In-Plane Loading
(American Society of Civil Engineers, 2013)Masonry walls subjected to in-plane loading exhibit a complex behavior because of the influence of several parameters such as axial load, aspect ratio, and the strength of materials. In high-rise buildings or seismic areas, ... -
Performance of Three-Dimensional Reinforced Concrete Beam-Column Substructures under Loss of a Corner Column Scenario
(American Society of Civil Engineers, 2013)The vulnerability of conventional RC structures to structural failure caused by the loss of corner columns has been emphasized over the past years. However, the lack of experimental tests has led to a gap in the knowledge ... -
Severely Corroded RC with Cover Cracking
(American Society of Civil Engineers, 2013)It is not uncommon that cover cracking, spalling, and delamination occur in many corroding RC structures. Previous research has mainly been concerned with corrosion levels leading to cover cracking along the main reinforcement, ... -
Active Debonding Detection for Large Rectangular CFSTs Based on Wavelet Packet Energy Spectrum with Piezoceramics
(American Society of Civil Engineers, 2013)The debonding between the steel tube and the confined concrete core of concrete-filled steel tubes (CFSTs) can weaken the confinement effect of the steel tube on the concrete core and may induce a decrease in the load-carrying ... -
Evaluation of Shear Strength Design Methodologies for Slender Shear-Critical RC Beams
(American Society of Civil Engineers, 2013)This paper seeks to examine the concrete contribution to shear strength and determine the inclination of the compressive strut within the variable truss model for slender RC shear-critical beams with stirrups. Using the ... -
Simplified Optimum Design Procedure for Special Unbonded Posttensioned Split Precast Shear Walls
(American Society of Civil Engineers, 2013)In this paper, a set of simplified design equations for an unbonded posttensioned (PT) precast split hybrid shear wall system is developed. Such a system was proposed by the Precast Seismic Structural Systems (PRESSS) and ... -
Effectiveness of Tuned Mass Dampers against Ground Motion Pulses
(American Society of Civil Engineers, 2013)It is known that the effectiveness of tuned mass dampers (TMDs) decreases as the input duration shortens. As a result, their use is commonly discouraged against short-duration, pulse-like ground motions, such as those ... -
Discussion of “Second-Order Analysis of Plane Frames with One Element per Member” by Richard J. Balling and Jesse W. Lyon
(American Society of Civil Engineers, 2013) -
Active Shear Planes of Bolted Connections Failing in Block Shear
(American Society of Civil Engineers, 2013)In the steel design codes worldwide, the shear area for calculating the block shear capacity of a bolted connection is either the gross or the net shear area. The authors have previously noted independent experimental ...