Journal of Structural Engineering: Recent submissions
Now showing items 4061-4080 of 10765
-
Structural Performance of Bolted Connections and Adhesively Bonded Joints in Glass Structures
(American Society of Civil Engineers, 2013)High-strength adhesives provide an alternative, and potentially more efficient, load-bearing connection to conventional bolted connections in glass structures, but the relative structural performance of these connections ... -
Robustness of Bolted-Angle Connections against Progressive Collapse: Experimental Tests of Beam-Column Joints and Development of Component-Based Models
(American Society of Civil Engineers, 2013)Several structural collapse incidents indicate that failure usually starts from beam-column joints exposed to abnormal loads, especially for steel and composite structures. If the connections are sufficiently robust and ... -
Unified Bond Stress–Slip Model for Reinforced Concrete
(American Society of Civil Engineers, 2013)Despite extensive investigations of bond stress versus slip modeling for RC structures, most existing bond stress–slip models are incomplete, discontinuous, and insufficiently accurate. These problems can cause nonconvergence ... -
Probabilistic Models for Structural Performance of Rounded Dovetail Joints
(American Society of Civil Engineers, 2013)This paper presents probabilistic models for the structural performance of rounded dovetail joints. The models are developed with a Bayesian technique, which implies that the model uncertainty is explicitly characterized ... -
Flexure and Shear Interaction in Steel I-Girders
(American Society of Civil Engineers, 2013)AASHTO LRFD and AISC specifications have adopted Basler’s interaction equation, which was formulated for noncompact sections without considering shear buckling. AASHTO LRFD specifications, however, have completely neglected ... -
Seismic Performance of Steel Self-Centering, Moment-Resisting Frame: Hybrid Simulations under Design Basis Earthquake
(American Society of Civil Engineers, 2013)The behavior of a self-centering moment-resisting frame (SC-MRF) is characterized by the connection gap opening and closing at beam-column interfaces under earthquake loading. A SC-MRF uses high-strength posttensioning ... -
Shear Capacity of Normal, Lightweight, and High-Strength Concrete Beams according to Model Code 2010. II: Experimental Results versus Nonlinear Finite Element Program Results
(American Society of Civil Engineers, 2013)Nonlinear finite element analysis (NLFEA) is a useful tool for the assessment and design of structures if the reliability of the prediction is known in advance. Therefore, it makes sense to tailor finite element programs ... -
Probabilistic Demand Models and Fragility Estimates for Bridges Elevated with Steel Pedestals
(American Society of Civil Engineers, 2013)Probabilistic seismic demand models are developed for bridges elevated with steel pedestals by adding correction and error terms to commonly used models. Separate probabilistic demand models are developed for the force ... -
Modeling of Very Large Interacting Multiple-Beam Systems with Application to Suspension Bridge Cables
(American Society of Civil Engineers, 2013)Systems of parallel beams connected with springs appear often in engineering. Typical examples are bundles of wires, such as the ones appearing in suspension bridge cables. These connections result in coupling of the ... -
Shear Capacity of Normal, Lightweight, and High-Strength Concrete Beams according to Model Code 2010. I: Experimental Results versus Analytical Model Results
(American Society of Civil Engineers, 2013)Many models to determine the shear capacity of shear reinforced beams are based on the truss analogy. Various proposals have been formulated in recent years, all of which differ with regard to the limits of strut inclination. ... -
Innovative Families of Double-Layer Tensegrity Grids: Quastruts and Sixstruts
(American Society of Civil Engineers, 2013)Double-layer tensegrity grids (DLTGs) are spatial reticulated systems based on tensegrity principles, which have been studied in detail over recent years. The most important investigations have been carried out focusing ... -
Probabilistic Analysis of Corrosion of Reinforcement in RC Bridges Considering Fuzziness and Randomness
(American Society of Civil Engineers, 2013)A general methodology for probabilistic corrosion analysis of reinforcing bar in RC bridges is proposed in this paper. Uncertainties due to limited number of experimental data, incomplete inspection information, as well ... -
Closure to “Evaluation of Force-Based Frame Element Response Sensitivity Formulations” by Michael H. Scott
(American Society of Civil Engineers, 2013) -
Experimental Investigation and Direct Strength Design of High-Strength, Complex C-Sections in Pure Bending
(American Society of Civil Engineers, 2013)Plain C- or Z-sections are two of the most common cold-formed steel shapes in use throughout the world. Other shapes are high-strength SupaCee and SupaZed (Bluescope Steel Ltd., Melbourne, Australia) steel sections, which ... -
Integrated Analytical and Experimental Research to Develop a New Seismic Design Methodology for Precast Concrete Diaphragms
(American Society of Civil Engineers, 2013)A new seismic diaphragm design methodology has been developed for precast concrete floor diaphragms. The knowledge required to create the design methodology was obtained through an integrated analytical and experimental ... -
Provisions for Ductile Behavior of Timber-to-Steel Connections with Multiple Glued-In Rods
(American Society of Civil Engineers, 2013)Connections with glued-in rods are very efficient, high-strength joints and can be successfully used, for example, for the anchorage of vertical timber elements to a foundation. Although extensive research was done on the ... -
Derivation of Normalized Pressure Impulse Curves for Flexural Ultra High Performance Concrete Slabs
(American Society of Civil Engineers, 2013)In previous studies, a finite-difference procedure was developed to analyze the dynamic response of simply supported normal reinforced concrete (NRC) slabs under blast loads. Ultra high performance concrete (UHPC) is a ... -
Cyclic Response of Reinforced Concrete Walls with Different Anchorage Details: Experimental Investigation
(American Society of Civil Engineers, 2013)Previous tests of structural walls have routinely used continuous reinforcement extending from the foundation to the top of the specimen. This detailing is consistently different from that of multistory walls in the field, ... -
Ultimate Strength of Reinforced Concrete Circular Members Subjected to Axial Force, Bending Moment, and Shear Force
(American Society of Civil Engineers, 2013)Over the last few decades, a significant effort has been made to achieve accurate evaluation of the resistance of RC elements subjected to pure shear or combined internal forces including shear. Regarding the latter, ... -
Moment Connection for Quick Assembly of Timber Portal Frame Buildings: Theory and Validation
(American Society of Civil Engineers, 2014)This paper provides an overview of a moment connection for use in prefabricated timber portal frame buildings. The connection, known as the quick-connect joint, uses rods housed in timber sleeves that are placed on the ...