Journal of Structural Engineering: Recent submissions
Now showing items 4041-4060 of 10765
-
Modeling of Reinforced Concrete Assemblies under Column-Removal Scenario
(American Society of Civil Engineers, 2014)This paper presents a computational investigation of two reinforced concrete beam-column assemblies, each comprising three columns and two beams, subjected to monotonically increasing vertical displacement of the unsupported ... -
Assessment of ASCE 7-10 Standard Methods for Determining Wind Loads
(American Society of Civil Engineers, 2013)The purpose of this paper is to discuss issues associated with ASCE 7-10 standard methods for determining wind loads on buildings and other structures that warrant comment, correction, or improvement. The assessment is ... -
Plate Buckling Strength of Steel Wide-Flange Sections at Elevated Temperatures
(American Society of Civil Engineers, 2013)At ambient temperature, estimations of the postbuckling strength of steel plates (web and flanges) in wide-flange beams are based on the assumption that the stress at the edge of the plate equals the yield stress of the ... -
Out-of-Plane Stability of Buckling-Restrained Braces Placed in Chevron Arrangement
(American Society of Civil Engineers, 2013)Large-scale shake table tests were performed at E-Defense to examine the out-of-plane stability of buckling-restrained braces (BRBs). Two specimens were subjected repeatedly to a near-fault ground motion with increasing ... -
Analytical Study on Plastic Hinge Length of Structural Walls
(American Society of Civil Engineers, 2013)This study was organized to derive an analytical expression for the estimation of plastic hinge length for cantilever structural walls using the results of comprehensive nonlinear finite-element analyses. For that purpose, ... -
Simplified Method for Estimation of Beam Plastic Rotation Demand in Special Moment-Resisting Steel-Frame Structures
(American Society of Civil Engineers, 2013)It is necessary to predict the plastic deformation demand of members and the story drift ratio for seismic design. In the present study, a simple method of estimating the plastic rotation of beams in special steel ... -
Effect of Circular Bolt Pattern on Behavior of Extended End-Plate Connection
(American Society of Civil Engineers, 2013)The behavior of extended end-plate connections with a circular bolt pattern under static and cyclic loads is investigated. Twelve three-dimensional numerical models were developed and analyzed using the FEM, and the results ... -
Seismic Design Criteria for Reinforcement Anchorages at Interior RC Beam-Column Joints
(American Society of Civil Engineers, 2013)The requirements for the anchorage of beam longitudinal reinforcement at interior beam-column joints in earthquake-resistant RC moment-resisting frames are reevaluated. An introductory comparison of international design ... -
Comparison of Seismic Experiments on Traditional Chinese Wood Structures and Light Wood-Framed Structures
(American Society of Civil Engineers, 2013)Shaking table tests of two 1:2 scale prototype structures were performed to study the seismic performance of Chinese traditional wood structures and light wood-framed structures. The results show that the natural frequency ... -
Mechanics-Based Hinge Analysis for Reinforced Concrete Columns
(American Society of Civil Engineers, 2013)The lateral deformation behavior of a RC column is particularly important because it not only magnifies the moment but also affects the ability of the column—and, subsequently, the frame—to sway and absorb energy at all ... -
Cyclic Performance of Glued Laminated <i>Guadua</i> Bamboo-Sheathed Shear Walls
(American Society of Civil Engineers, 2013)This paper presents a study aimed to determine the cyclic performance of wood-frame shear walls sheathed with glued laminated -
Response Sensitivity of Geometrically Nonlinear Force-Based Frame Elements
(American Society of Civil Engineers, 2013)To expand the scope of accurate and efficient gradient-based applications in structural engineering, the direct differentiation method (DDM) is applied to compute the response sensitivity of force-based frame finite elements ... -
Evaluation of Conventional Construction Techniques for Enhancing the Blast Resistance of Steel Stud Walls
(American Society of Civil Engineers, 2013)Cold-formed steel stud walls are an attractive alternative to wooden stud walls because of their ductility, sustainability, and resistance to insects, mold, and rot. To date, engineers have faced challenges using steel ... -
Stress-Concentration Factors in Circular Hollow Section and Square Hollow Section T-Connections: Experiments, Finite-Element Analysis, and Formulas
(American Society of Civil Engineers, 2013)Nodal T-connections made up of circular hollow section (CHS) braces and square hollow section (SHS) chords (CHS-SHS T-connections) have the advantage that they do not require complex brace end preparation when compared ... -
Experimental Fatigue Evaluation of Welded Connections in Cantilevered Steel Sign Structures
(American Society of Civil Engineers, 2013)Cantilevered steel sign structures, commonly used to support freestanding signs, are flexible, have low damping, and can be prone to fatigue-type failure as a result of wind-induced vibration. A sleeve connection, involving ... -
Structural Connections for Small-Diameter Poles
(American Society of Civil Engineers, 2013)In Portugal, given the large proportions of natural regeneration pine stands, a large amount of young trees must be removed from the forest, to assure the quality of mature trees and to decrease the risk of fire. With this ... -
Full-Scale Shaking-Table Tests of XLam Panel Systems and Numerical Verification: Specimen 1
(American Society of Civil Engineers, 2013)The material presented in this paper refers to a part of the investigation on cross-laminated (XLam) wall panel systems subjected to seismic excitation, carried out within the bilateral project realized by the Institute ... -
Experimental Study of Diagonally Stiffened Steel Plate Shear Walls
(American Society of Civil Engineers, 2013)Upon recent research, steel plate shear wall (SPSW) is known as an effective lateral force resisting system in high seismic zones. However, there are still areas of concern in the design and construction of this system ... -
Behavior of Precast Concrete Shear Walls for Seismic Regions: Comparison of Hybrid and Emulative Specimens
(American Society of Civil Engineers, 2013)This paper discusses the lateral load behavior of two, 0.40-scale, -
Vibrations in Neighborhood Buildings due to Rock Concerts in Stadiums
(American Society of Civil Engineers, 2013)Rock-concert events in stadiums have raised complaints among dwellers of neighborhood buildings about annoying vibrations in Buenos Aires, Argentina, Wellington, New Zealand, Medellín, Colombia, and other cities around the ...