Journal of Structural Engineering: Recent submissions
Now showing items 4081-4100 of 10765
-
Behavior and Design of Sheathed Cold-Formed Steel Stud Walls under Compression
(American Society of Civil Engineers, 2013)Currently, there is a need for a design method for cold-formed steel (CFS) stud and track walls that use traditional sheathing materials to brace against compressive load. The objective of this paper is to provide a robust ... -
Flexural Strength and Rotation Capacity of I-Shaped Beams Fabricated from 800-MPa Steel
(American Society of Civil Engineers, 2013)Flexural tests on full-scale I-shaped beams, built up from high-strength steels (HSB800 and HSA800) with a nominal tensile strength of 800 MPa, were carried out to study the effect of flange slenderness on flexural strength ... -
Reinforcement and Concrete Bond: State Determination along the Development Length
(American Society of Civil Engineers, 2013)The distribution of bond on the lateral surface of steel reinforcement embedded in concrete is explored through systematic solution of the governing field equations of the associated mechanical problem. By separating the ... -
Structural Identification: Opportunities and Challenges
(American Society of Civil Engineers, 2013) -
Accounting for Earthquake-Induced Dam-Reservoir Interaction Using Modified Accelerograms
(American Society of Civil Engineers, 2013)This paper proposes a new practical and efficient procedure to investigate the seismic response of gravity dams that (1) avoids the finite or boundary element discretization of the impounded reservoir; (2) can be applied ... -
Experimental Study of Collapse Limits for Wood Frame Shear Walls
(American Society of Civil Engineers, 2013)Under extreme earthquake loading, light-frame wood building collapse is often caused by excessive interstory drifts at one or more story levels, leading to catastrophic -
Relative Displacement Sensing Techniques for Postevent Structural Damage Assessment: Review
(American Society of Civil Engineers, 2013)Relative displacement, which is displacement of a point on a structure with respect to its original location or an adjacent point on the structure that has also undergone movement, can be an effective indicator of postevent ... -
Quantifying Sources of Uncertainty for Creep Models under Varying Stresses
(American Society of Civil Engineers, 2013)The prediction of creep deformations of concrete and reinforced concrete structures has been a field of extensive research. Several different creep models have been developed. Most of the models were developed for constant ... -
Hybrid Simulation for Earthquake Response of Semirigid Partial-Strength Steel Frames
(American Society of Civil Engineers, 2013)The behavior of semirigid partial-strength connections has been investigated through either experimental component testing or detailed three-dimensional (3D) finite-element (FE) models of beam-column subassemblies. Previous ... -
Wind-Induced Response and Equivalent Static Wind Load of Long-Span Roof Structures by Combined Ritz-Proper Orthogonal Decomposition Method
(American Society of Civil Engineers, 2013)The contribution of higher vibration modes is important to the wind-induced response of long-span roofs, which makes it difficult to estimate the wind-induced response and equivalent static wind loads accurately. The authors ... -
Strength and Stiffness of Masonry-Infilled Frames with Central Openings Based on Experimental Results
(American Society of Civil Engineers, 2013)An extensive statistical analysis is conducted on experimental data to achieve a formula for the strength and stiffness of masonry- infilled frames having central openings. For this, most of the available experimental data ... -
Experimental Investigation and Design Method Research on Low-Rise Cold-Formed Thin-Walled Steel Framing Buildings
(American Society of Civil Engineers, 2013)Cold-formed thin-walled steel residential building systems, because of their good environment protection, seismic performance, and high construction efficiency, have been widely used in the United States, Canada, Japan, ... -
Experimental Study on the Mechanical Behavior and Failure Mechanism of a Latticed Steel Transmission Tower
(American Society of Civil Engineers, 2013)Transmission tower collapses caused by strong winds or severe freezing rains frequently occur in many parts around the world. To study the mechanical behavior and failure mechanism of tower structures under such environmental ... -
Developing LH Controller to Model Low- and High-Velocity Behavior in a Prototype MR Damper
(American Society of Civil Engineers, 2013)A low- and high-velocity based controller (LH controller) is developed to model the force-velocity relationship of a magnetorheological (MR) fluid damper that enables the controlling current to be calculated as a function ... -
Seismic Performance Parameter Quantification of Shear-Critical Reinforced Concrete Masonry Squat Walls
(American Society of Civil Engineers, 2013)In North America, the design of reinforced masonry (RM) shear walls as a seismic force-resisting system (SFRS) is very conservative in terms of quantifying the wall’s shear strength and ductility capacity. In the current ... -
Strengthening and Repair of Reinforced Concrete Beams Using External Steel Plates
(American Society of Civil Engineers, 2013)The study presents the results of an experimental program aimed at investigating the flexural behavior of externally plated RC beams. A total of 13 full-scale rectangular RC beams were tested. The effects on the behavior ... -
Use of Continuous-Wavelet Transmissibility for Structural Operational Modal Analysis
(American Society of Civil Engineers, 2013)Operational modal analysis is a challenging task to deal with output-only vibration measurements contaminated by noise. This paper proposes a new method for operational modal identification of a linear system using ... -
Advancing Earthquake Engineering Research through Cyberinfrastructure
(American Society of Civil Engineers, 2013)This paper describes the cyberinfrastructure (CI) of the George E. Brown, Jr. Network for Earthquake Engineering Simulation (NEES) and examines the evidence that this infrastructure is facilitating earthquake engineering ... -
Behavior of a Double-Layer Tensegrity Grid under Static Loading: Identification of Self-Stress Level
(American Society of Civil Engineers, 2013)The determination of the state of internal stress is important to define the rigidity of a tensegrity structure and its stability. Several methods can be used; some are based on direct measurements of the forces in the ... -
Confidence Bounds on Design Variables Using High-Dimensional Model Representation–Based Inverse Reliability Analysis
(American Society of Civil Engineers, 2013)This paper presents a novel solution procedure for inverse reliability problems with implicit response functions without requiring the derivatives of the response functions with respect to uncertain variables. This can be ...