Journal of Structural Engineering: Recent submissions
Now showing items 4101-4120 of 10765
-
Experimental Behavior of Nonconforming RC Columns with Plain Bars under Constant Axial Load and Biaxial Bending
(American Society of Civil Engineers, 2013)Available capacity models for the assessment of seismic capacity of RC columns are mainly based on experimental tests under axial load and uniaxial bending. Furthermore, experimental tests have been mainly performed on ... -
Punching of Concrete Slabs: Interpretation of Test Results
(American Society of Civil Engineers, 2013) -
Innovation in Steel Design: Rethinking the Research Paradigm
(American Society of Civil Engineers, 2013) -
Prediction of Flexural Deformation of a Corroded RC Beam with a Polynomial Tension-Stiffening Model
(American Society of Civil Engineers, 2013)A new model is proposed by an assumption of quartic polynomial function to simulate the relative slip of steel bar and surrounding concrete in RC tensile member. In the new model, the postcracking behavior with a ... -
Discussion of “Evaluation of Force-Based Frame Element Response Sensitivity Formulations” by Michael H. Scott
(American Society of Civil Engineers, 2013) -
Seismic Behavior of Steel Buildings with Hybrid Braced Frames
(American Society of Civil Engineers, 2013)This paper presents the seismic performance of buildings with a hybrid bracing system in which buckling-restrained braces (BRBs) are used at the lower stories with the higher level of ductility demands, and conventional ... -
Reviewers
(American Society of Civil Engineers, 2012) -
Free Vibration Analysis of Cross-Ply Laminated Thin-Walled Beams with Open Cross Sections: Exact Solution
(American Society of Civil Engineers, 2013)The objective of the present paper is to analyze the free vibrations of thin-walled beams with arbitrary open cross section, made of cross-ply laminates with midplane symmetry, by means of an exact solution. The theory of ... -
Cold-Formed Steel Lipped Channel Columns Influenced by Local-Distortional Interaction: Strength and DSM Design
(American Society of Civil Engineers, 2013)This paper deals with the ultimate strength and design of fixed-ended lipped channel columns experiencing local-distortional buckling mode interaction. First, the paper reports the results of an experimental investigation ... -
ASCE/SEI 41 Provisions on Deformation Capacity of Older-Type Reinforced Concrete Columns with Plain Bars
(American Society of Civil Engineers, 2013)This study contributes to the improvement of capacity models for older-type RC members to be used in the seismic assessment of existing RC structures. A database of experimental tests on RC columns with plain bars is ... -
Large-Scale Experimental Studies of Structural Control Algorithms for Structures with Magnetorheological Dampers Using Real-Time Hybrid Simulation
(American Society of Civil Engineers, 2013)Real-time hybrid simulations using large-scale magnetorheological (MR) dampers were conducted to evaluate the performance of various structural control strategies to control the seismic response of a three-story steel-frame ... -
Large-Scale Experimental Validation of Steel Posttensioned Connections with Web Hourglass Pins
(American Society of Civil Engineers, 2013)A new self-centering beam-to-column connection is proposed. The connection uses posttensioned high-strength steel bars to provide self-centering capability and carefully designed energy-dissipation (ED) elements that consist ... -
Reinforced Concrete Force Visualization and Design Using Bilinear Truss-Continuum Topology Optimization
(American Society of Civil Engineers, 2013)A new force visualization and design tool employing hybrid topology optimization is introduced for RC and prestressed concrete structural members. The optimization scheme couples a minimum compliance (maximum stiffness) ... -
Time-Dependent Response of Spatially Curved Steel-Concrete Composite Members. I: Computational Modeling
(American Society of Civil Engineers, 2013)This paper develops a numerical formulation for the nonlinear time-dependent analysis of steel-concrete composite members that are curved arbitrarily in space, which includes the effects of concrete shrinkage, creep, and ... -
Performance of Beam-to-Column Connection of a Well-Detailed RC Moment Frame Building under Pseudodynamic Loading
(American Society of Civil Engineers, 2013)The performance of RC frame members under earthquake loading may differ significantly from that of the frame. Even if the story drifts are not significant, a collapse mechanism may be observed because of extensive deformations ... -
Simplified Procedure to Calculate by Hand the Natural Periods of Semirigid Steel Frames
(American Society of Civil Engineers, 2013)Current seismic design codes provide empirical equations for the calculation of the fundamental period of a framed structure primarily as a function of height, and do not consider the effect of beam-column joint stiffness. ... -
Time-Dependent Response of Spatially Curved Steel-Concrete Composite Members. II: Curved-Beam Experimental Modeling
(American Society of Civil Engineers, 2013)This paper presents a comprehensive experimental study of the time-dependent creep and shrinkage behavior of a simply supported steel-concrete composite beam that is curved in its plan; it is a companion to the first paper ... -
Multispring Hinge Element for Reinforced Concrete Frame Analysis
(American Society of Civil Engineers, 2013)This paper describes the development and validation of an analytical multispring plastic hinge element that can predict elongation of ductile RC plastic hinges together with its flexural and shear responses. The element ... -
Bayesian Updating of Fragility Functions Using Hybrid Simulation
(American Society of Civil Engineers, 2013)The accuracy of fragility functions is critical for regional risk and loss estimations. This paper proposes a two-stage approach to generate improved fragility functions for engineering structures using field measurement ... -
Seismic Performance of an Innovative Light-Frame Cold-Formed Steel Frame for Midrise Construction
(American Society of Civil Engineers, 2013)This paper presents the method and results of a study whose objective was to investigate the seismic performance of a new light-frame cold-formed steel-frame system. The system includes floor trusses, open panels, V-braced ...