Journal of Structural Engineering: Recent submissions
Now showing items 4121-4140 of 10765
-
Seismic Behavior and Detailing of High-Performance Fiber-Reinforced Concrete Coupling Beams and Coupled Wall Systems
(American Society of Civil Engineers, 2013)The seismic behavior of coupling beams and walls constructed with tensile strain-hardening, high-performance fiber-reinforced concrete (HPFRC) was studied through tests of large-scale precast coupling beams and coupled ... -
Triaxial Behavior of Concrete Subjected to Dynamic Compression
(American Society of Civil Engineers, 2013)Experimental research is presented in this paper to investigate the hydrostatic behavior of concrete under dynamic compression. By using the MTS servohydraulic testing system, strain rates from -
Shake-Table Tests of a 3-Story Masonry-Infilled RC Frame Retrofitted with Composite Materials
(American Society of Civil Engineers, 2013)This paper presents a study that investigated the effectiveness of retrofitting unreinforced masonry infill walls with composite materials to enhance the seismic performance of infilled nonductile RC frames. The primary ... -
Approach for Modeling Fire Insulation Damage in Steel Columns
(American Society of Civil Engineers, 2013)This paper presents an approach for modeling the fire insulation damage in steel columns. Both experimental and numerical studies were carried out to investigate the failure pattern and damage phenomenon of fire insulation ... -
Monotonic Behavior of Reinforced Concrete Columns Confined with High-Performance Ferrocement
(American Society of Civil Engineers, 2013)In this study, a method of strengthening circular columns using high-performance ferrocement (HPF) is proposed. This is achieved by replacing the concrete cover by HPF (i.e., comprising rendering material and wire mesh). ... -
Semianalytical Calculation of the Collapse Load of Eccentrically Compressed, No-Tension Beams with an Annular Cross Section
(American Society of Civil Engineers, 2013)A second-order equilibrium analysis is developed for the calculation of the collapse load of an eccentrically compressed beam with an annular cross section in the presence of a no-tension material. Unlike the case of a ... -
Seismic Design and Viability of Hybrid Masonry Building Systems
(American Society of Civil Engineers, 2013)Hybrid masonry is an innovative technology for seismic design of buildings. The system uses reinforced masonry panels within a steel-framed structure, where steel connector plates link the steel frame to the masonry panels. ... -
Analysis of Reinforced Concrete Columns Subjected to Combined Axial, Flexure, Shear, and Torsional Loads
(American Society of Civil Engineers, 2013)This paper describes the implementation of a three-dimensional (3D) concrete constitutive model for fiber-based analysis of RC members subjected to combined loadings including torsion. The proposed model is formulated to ... -
Behavior of Horizontally Curved I-Girders during Lifting
(American Society of Civil Engineers, 2013)Several stages of performance need to be considered during the design of curved I-girders, including both the construction stage and the in-service conditions. Girder stability during the early stages of construction can ... -
Tensile Capacity of Single-Angle Shear Connections Considering Prying Action
(American Society of Civil Engineers, 2013)The 2009 International Building Code (IBC) structural integrity provisions include a minimum tensile capacity requirement for simple shear steel connections. An all-bolted single-angle connection has been physically tested ... -
Risk-Based Approach for Optimum Maintenance of Bridges under Traffic and Earthquake Loads
(American Society of Civil Engineers, 2013)Structures deteriorate as a result of material aging, aggressive environmental conditions, and increasing loads. During their lifetime, structures are also possibly exposed to some extreme events. The associated consequences ... -
Structural Identification of Constructed Systems: Collective Effort toward an Integrated Approach That Reduces Barriers to Adoption
(American Society of Civil Engineers, 2013) -
Truss-Arch Model for Shear Strength of Shear-Critical Reinforced Concrete Columns
(American Society of Civil Engineers, 2013)Experimental observations on 11 RC columns tested at Nanyang Technological University and existing experimental data of 79 shear-critical RC columns are presented. Significant arch action is found in columns with a small ... -
Generalized Probabilistic Framework for Optimum Inspection and Maintenance Planning
(American Society of Civil Engineers, 2013)This paper proposes a generalized probabilistic framework for optimum inspection and maintenance planning of deteriorating structures. The proposed framework covers (1) the damage occurrence and propagation and service ... -
Axial Failure of Reinforced Concrete Columns Damaged by Shear Reversals
(American Society of Civil Engineers, 2013)Results from tests on eight full-scale RC columns with ties with large spacing ( -
Net Section Tension Capacity of Cold-Reduced Sheet Steel Angle Braces Bolted at One Leg
(American Society of Civil Engineers, 2013)This paper examines the accuracy of equations specified by the North American and Australasian steel structures codes for determining the net section tension capacity of a cold-formed steel angle brace bolted at one leg. ... -
Dynamic Response of a Chevron Concentrically Braced Frame
(American Society of Civil Engineers, 2013)Large-scale shake table tests were conducted at E-Defense, Japan, to examine the dynamic response of a steel concentrically braced frame. The specimen was a single-bay, single-story frame with a pair of square hollow ... -
Simulation of Steel Brace Hysteretic Response Using the Force Analogy Method
(American Society of Civil Engineers, 2013)Steel concentrically braced frame (CBF) systems are widely used in buildings to resist lateral loads, because they possess high lateral strength and stiffness. For seismic applications, braces dissipate energy through ... -
Seismic Performance of Low-Rise Wood-Framed and Reinforced Masonry Buildings with Clay Masonry Veneer
(American Society of Civil Engineers, 2013)This paper describes a coordinated experimental and analytical study that investigated the seismic performance of wood-stud construction with clay masonry veneer and of RC masonry construction with clay masonry veneer ... -
Concentric and Eccentric Compression Experiments of Plastered Straw Bale Assemblies
(American Society of Civil Engineers, 2013)Straw bale construction is a nonconventional technique that involves stacking common straw bales and then applying layers of plaster to form load-bearing walls. The straw bales provide insulation, whereas the plaster ...