Journal of Structural Engineering: Recent submissions
Now showing items 2501-2520 of 10765
-
Design of Single-Level Guyed Towers Considering Interrelationship between Bracing Strength and Rigidity Requirements
(American Society of Civil Engineers, 2017)Elastic buckling and second-order analyses are conducted to establish a more rigorous design procedure for single-level guyed towers, in which the interrelationship between the strength and rigidity requirements of the ... -
Model for the Plastic Region in Slender RC Columns with Nonlinear Moment and Stiffness Profiles
(American Society of Civil Engineers, 2017)This paper presents a nonlinear inelastic solution for the length of the critical plastic region in the case of nonlinear moment profiles along RC bridge columns. A new analytical expression for the length of the plastic ... -
Empirical Approach to Evaluating the Tornado Fragility of Residential Structures
(American Society of Civil Engineers, 2017)Tornado-induced wind load modeling has advanced significantly in recent years, but comparison of the experimental or numerical models to observed tornado damage is limited. This paper describes the development of empirically ... -
Scaling Bias and Record Selection for Quantifying Seismic Structural Demand
(American Society of Civil Engineers, 2017)Lack of sufficient earthquake records for a given site and hazard level is a frequent challenge in seismic response assessment. This paper considers the response of several simple nonlinear systems to “amplitude-scaled” ... -
Effects of Masonry Infill Wall on the Performance of RC Frames to Resist Progressive Collapse
(American Society of Civil Engineers, 2017)Masonry-infilled (MI) panels, which serve as partitions in buildings, are normally considered as architectural elements. Their weights are considered in progressive collapse analysis, but the resistance of the walls is ... -
Large-Scale Cyclic Testing of Steel-Plate Shear Walls with Coupling
(American Society of Civil Engineers, 2017)The steel-plate shear wall with coupling (SPSW-WC) system is a natural extension of the conventional steel-plate shear wall (SPSW) seismic force–resisting system. The SPSW-WC configuration is created by linking a pair of ... -
Influence of Column Strength and Stiffness on the Inelastic Behavior of Strong-Column-Weak-Beam Frames
(American Society of Civil Engineers, 2017)The design philosophy of strong-column-weak-beam (SCWB) in which plastic deformation is predominantly allowed to occur in beams while columns remain essentially elastic is commonly adopted in seismic design codes for ... -
Wind-Induced Vibration Mitigation in Tall Buildings Using the Tuned Mass-Damper-Inerter
(American Society of Civil Engineers, 2017)In this paper, the classical linear tuned mass damper (TMD) is coupled with an inerter, a two-terminal device resisting the relative acceleration of its terminals, in various tuned mass-damper-inerter (TMDI) topologies to ... -
Recent Advances in Assessment and Mitigation of Multiple Hazards
(American Society of Civil Engineers, 2017) -
Experimental Study of Dynamic Progressive Collapse in Flat-Plate Buildings Subjected to Exterior Column Removal
(American Society of Civil Engineers, 2017)This paper documents the findings from a dynamic collapse experiment carried out on a single-story two-by-two bay reinforced concrete flat-plate substructure. The test specimen had a 0.4 scale, represented older flat-plate ... -
Closure to “Modified Plastic-Hinge Method for Circular RC Bridge Columns” by Jason C. Goodnight, Mervyn J. Kowalsky, and James M. Nau
(American Society of Civil Engineers, 2017) -
Seismic Base Shear Modification Factors for Timber-Steel Hybrid Structure: Collapse Risk Assessment Approach
(American Society of Civil Engineers, 2017)In this paper, to supplement the Canadian building code for a timber-steel hybrid structure, over-strength, and ductility-related force modification factors are developed and validated using a collapse risk assessment ... -
Discussion of “Modified Plastic-Hinge Method for Circular RC Bridge Columns” by Jason C. Goodnight, Mervyn J. Kowalsky, and James M. Nau
(American Society of Civil Engineers, 2017) -
Experimental Study and Numerical Simulation of the Progressive Collapse Resistance of Single-Layer Latticed Domes
(American Society of Civil Engineers, 2017)Progressive collapse accidents of single-layer latticed domes seriously threaten public safety and social security. Structural integrity and progressive collapse–resisting capacity are gradually becoming essential requirements ... -
Prediction of the Lateral Load-Displacement Curves for Reinforced Concrete Squat Walls Failing in Shear
(American Society of Civil Engineers, 2017)The reinforced concrete squat wall, which demonstrates high stiffness and load capacity, is one of the most effective earthquake-resisting members. It has been widely used in seismic design and retrofitting and thus is ... -
Predicting Utah Ground Snow Loads with PRISM
(American Society of Civil Engineers, 2017)Despite their importance in building design, ground snow load requirements remain largely undefined for the western United States. This paper proposes an adaptation of the Parameter-Elevation Relationships on Independent ... -
Circular Concrete-Filled Steel Tubes Subjected to Coupled Tension and Chloride Corrosion
(American Society of Civil Engineers, 2017)This paper investigates the time-dependent behavior of concrete-filled steel tubular (CFST) tensile members subjected to coupled long-term loading and chloride corrosion. A series of experiments for CFST members under both ... -
Enriched Force-Based Frame Element with Evolutionary Plastic Hinge
(American Society of Civil Engineers, 2017)This paper presents a novel enriched force-based formulation for beam-column elements. The enrichment was developed on the basis of the concept of evolutionary plastic hinges and incorporated with conventional force-based ... -
Numerical Estimation for Initial Stiffness and Ultimate Moment of Top-Seat Angle Connections without Web Angle
(American Society of Civil Engineers, 2017)This paper develops new models predicting the initial stiffness and ultimate moment of top-seat angle connections without web angle (TSACs). The TSACs, bolted to the beam flange and the column flange, are studied to ... -
Experimental Investigation of Self-Centering Cross-Laminated Timber Walls
(American Society of Civil Engineers, 2017)Mass timber is an attractive and sustainable alternative structural engineering material to concrete and steel. Despite successful midrise to high-rise timber building projects around the world, such buildings have not ...