Journal of Structural Engineering: Recent submissions
Now showing items 2481-2500 of 10765
-
New Euler-Type Progressive Collapse Curves for Steel Moment-Resisting Frames: Analytical Method
(American Society of Civil Engineers, 2017)In order to assess the robustness of a building structure to progressive collapse, the removal of a structural key component is utilized. For a steel moment-resisting frame under a column-removal scenario, the two most ... -
Effect of Beam Tension on Cyclic Performance of WUF-W Steel Moment Connection
(American Society of Civil Engineers, 2017) -
Shear Strength Components in Reinforced Concrete Members
(American Society of Civil Engineers, 2017) -
Characterizing the In-Plane Rocking Response of Masonry Walls with Unbonded Posttensioning
(American Society of Civil Engineers, 2017)Unlike the use of bonded reinforcement to anchor a masonry wall to its foundation, the use of unbonded posttensioning may result in a controlled rocking response of the wall. Considering that conventional analysis techniques ... -
Blast Analysis of RC Beams Based on Moment-Curvature Relationship Considering Fixed-End Rotation
(American Society of Civil Engineers, 2017)An improved numerical model that can simulate the nonlinear behavior of RC beams subjected to blast loadings is introduced in this paper. The model is based on the moment-curvature relationship of a RC section, and a dynamic ... -
Reliability of Tower and Tower-Line Systems under Spatiotemporally Varying Wind or Earthquake Loads
(American Society of Civil Engineers, 2017)Towers or tower-line systems within a power network can experience damages under rare earthquakes or strong winds. The estimation of the failure probability of a tower-line system is rarely addressed for scenario wind or ... -
Crack Model for RC Members Based on Compatibility of Stress-Transfer and Mean-Strain Approaches
(American Society of Civil Engineers, 2017)The current study proposes a simple and mechanically sound analytical approach for crack analysis of reinforced concrete (RC) flexural members at the stage of stabilized cracking. The philosophy behind the proposed methodology ... -
Seismic Response of Reinforced-Concrete Masonry Shear-Wall Components and Systems: State of the Art
(American Society of Civil Engineers, 2017)This paper presents a concise state-of-the-art survey on the research work pertaining to the seismic response of reinforced masonry shear walls (RMSW) with a focus on the published research work as of the 1980s on mainly ... -
Development of Reinforcing Bars in SRCC Matrix: Modeling and Interpretation
(American Society of Civil Engineers, 2017)Experiments on deformed reinforcing bar anchorages developed in strain-resilient cementitious composites (SRCCs) with high tensile deformation capacity illustrate that the bar-matrix assembly may respond in a ductile manner ... -
Fiber-Section Model with an Exact Shear Strain Profile for Two-Dimensional RC Frame Structures
(American Society of Civil Engineers, 2017)A fiber-section model for nonlinear analysis of shear-critical reinforced concrete frames is developed. The model incorporates a new procedure for the computation of an exact shear strain profile and corresponding shear ... -
Finite-Element Modeling and Parametric Study of Glulam Beam-and-Deck Floors
(American Society of Civil Engineers, 2017)Small-amplitude cyclic vertical motions of timber floors perceived as unacceptable by humans are commonly the result of walking impact forces. Contemporary vibration serviceability guidelines mainly require prediction of ... -
Assessment of Strength Degradation of Historic Masonry Monuments due to Damage: Load Path–Based Approach
(American Society of Civil Engineers, 2017)Historic masonry monuments experience aging and accumulated damage, which consequently degrade both their stiffness and strength. Stiffness degradation can be quantified through nondestructive testing and has been widely ... -
Effect of Modeling Assumptions on the Earthquake-Induced Losses and Collapse Risk of Steel-Frame Buildings with Special Concentrically Braced Frames
(American Society of Civil Engineers, 2017)This paper quantifies the collapse risk and earthquake-induced economic losses of steel-frame buildings with special concentrically braced frames designed in urban California. A probabilistic building-specific loss estimation ... -
Three-Dimensional Finite-Element Modeling and Validation of a Timber-Framed House to Wind Loading
(American Society of Civil Engineers, 2017)This paper presents a three-dimensional (3D) finite-element model (FEM) of part of a contemporary timber-framed house for assessing the load sharing and contribution of lining elements to load sharing. Assembled with ... -
Collapse-Resisting Mechanisms of Planar Trusses Following Sudden Member Loss
(American Society of Civil Engineers, 2017)Progressive collapse incidents of truss structures are often reported; however, studies on the collapse resistance of truss structures are comparatively few. In order to investigate the collapse-resisting mechanisms of ... -
Collapse Response and Design of Deep Steel Columns Subjected to Lateral Displacement
(American Society of Civil Engineers, 2017)Recent experimental and computational studies have shown that the inelastic behavior of deep steel columns, where the cross-section depth is substantially greater than the flange width, is not yet well understood. To address ... -
Multihazard Analysis: Integrated Engineering and Social Science Approach
(American Society of Civil Engineers, 2017)Reducing the potential impacts from a future disaster can be accomplished through decreasing the hazard exposure and reducing the community’s vulnerability. Moreover, communities have both physical and social vulnerabilities ... -
Influence of Lap Splices on the Deformation Capacity of RC Walls. I: Database Assembly, Recent Experimental Data, and Findings for Model Development
(American Society of Civil Engineers, 2017)Recent postearthquake missions have shown that reinforced concrete (RC) wall buildings can experience critical damage owing to lap splices, which led to a recent surge in experimental tests of walls with such constructional ... -
Finite-Element Analysis of Reinforced Concrete Plates Subjected to Repeated Impact Loads
(American Society of Civil Engineers, 2017)This paper adapts and validates a three-dimensional finite element (3D-FE) model of reinforced concrete (RC) plates subjected to repeated low-velocity impact loads that were formerly tested by the authors. A brief description ... -
Influence of Lap Splices on the Deformation Capacity of RC Walls. II: Shell Element Simulation and Equivalent Uniaxial Model
(American Society of Civil Engineers, 2017)Spliced longitudinal reinforcement may result in a reduction of both strength and displacement capacity of reinforced concrete (RC) members. This applies in particular when lap splices are located in regions where inelastic ...