Journal of Structural Engineering: Recent submissions
Now showing items 2521-2540 of 10765
-
Erratum for “Numerical Modeling of Rectangular Reinforced Concrete Structural Walls” by Farhad Dashti, Rajesh P. Dhakal, and Stefano Pampanin
(American Society of Civil Engineers, 2017) -
Numerical Simulation of Hybrid Sliding-Rocking Columns Subjected to Earthquake Excitation
(American Society of Civil Engineers, 2017)This paper introduces a novel element formulation for the dynamic analysis of bridges incorporating posttensioned segmental columns with hybrid sliding-rocking (HSR) joints distributed over their height. These columns are ... -
Dual-Hazard Blast and Seismic Behavior of Concrete-Filled Double-Skin Steel Tubes Bridge Pier
(American Society of Civil Engineers, 2017)The dual-hazard inelastic behavior of concrete-filled double-skin steel tubes (CFDSTs) is experimentally investigated as a substitute to reinforced concrete columns for bridge piers in multihazard applications. Results ... -
Experimental Behavior and Design of CFT-RC Short Columns Subjected to Concentric Axial Loading
(American Society of Civil Engineers, 2017)Concrete-filled steel tube (CFT)–RC composite members consist of multiple CFT columns connected by RC plates or webs. CFT-RC composite members have been used in different types of structures, for example, as ribs in long-span ... -
Group Behavior of Double-Headed Anchored Blind Bolts within Concrete-Filled Circular Hollow Sections under Cyclic Loading
(American Society of Civil Engineers, 2017)Seven full-scale curved T-stubs connected to concrete-filled circular hollow sections (CFCHSs) using groups of double-headed anchored blind bolts (DHABBs) have been cyclically tested in this paper considering different ... -
Bioinspired Tuned Mass Damper for Mitigation of Wind-Induced Building Excitation
(American Society of Civil Engineers, 2017)This paper presents a novel bioinspired actuator that mimics the sacrificial bond and hidden length mechanism, a highly efficient energy dissipation mechanism found in bio-organisms such as abalone shell and bone. The ... -
I-Shaped Unreinforced Masonry Wallettes with a Soft-Layer Bed Joint: Behavior under Static-Cyclic Shear
(American Society of Civil Engineers, 2017)In order to extend the latest findings on the in-plane shear behavior of rectangular unreinforced masonry (URM) wallettes with soft-layer bed joints and gain insight into the possible influence of flanges, two series of ... -
Bond Behavior of Concrete-Filled Steel Tubes at Elevated Temperatures
(American Society of Civil Engineers, 2017)Extensive studies have been conducted into the bond behavior in concrete-filled steel tubes (CFST) at ambient temperature. However, the bond behavior of CFST columns subjected to fire is still unclear. A total of 24 push-out ... -
Testing and Analysis of Composite Cold-Formed Steel and Wood−Based Flooring Systems
(American Society of Civil Engineers, 2017)An experimental study was conducted into the degree of composite action that can arise between cold-formed steel joists and wood-based flooring panels. A series of material, push-out and 4-point bending tests were carried ... -
Seismic Performance Evaluation of Cold-Formed Steel Shear Walls Using Corrugated Steel Sheathing
(American Society of Civil Engineers, 2017)Cold-formed steel shear wall with corrugated sheet steel sheathing is a newly proposed lateral force resisting system from recent research work. The advantages of noncombustibility, high shear strength and high shear ... -
Experimental Behavior of Nonconforming RC Columns with Deformed Bars under Constant Axial Load and Fixed Biaxial Bending
(American Society of Civil Engineers, 2017)Although recent efforts have been made to understand the behavior of RC members subjected to cyclic biaxial bending, the experimental data available in the literature are still limited for making conclusions about the ... -
Long-Term Behavior of LVL Posttensioned Timber Beams
(American Society of Civil Engineers, 2017)The long-term behavior of unbonded posttensioned laminated veneer lumber (LVL) timber beams was investigated for four years under uncontrolled environmental conditions. Two full-scale simply supported beam specimens with ... -
State of the Art of Multihazard Design
(American Society of Civil Engineers, 2017)This paper provides perspectives on multihazard engineering in the contemporary structural engineering context in order to frame the breadth and multiple dimensions it encompasses, to summarize recent activities on selected ... -
Cyclic Tests of Steel Frames with Concealed Vertical Slits in Reinforced Concrete Infill Walls
(American Society of Civil Engineers, 2017)Experimental testing revealed that installing concealed vertical slits in reinforced concrete (RC) infill walls enabled the RC infill walls to behave in a more ductile manner (as compared to conventional solid RC walls), ... -
Special Issue on Earthquake Ground-Motion Selection and Modification for Nonlinear Dynamic Analysis of Structures
(American Society of Civil Engineers, 2011) -
Role of Toothing on In-Plane and Out-of-Plane Behavior of Confined Masonry Walls
(American Society of Civil Engineers, 2014) -
Shear Behavior of High-Volume Fly Ash Concrete versus Conventional Concrete: Experimental Study
(American Society of Civil Engineers, 2015) -
Rotational Behavior of Bolted Beam-to-Column Connections with Locally Cross-Laminated Glulam
(American Society of Civil Engineers, 2015) -
Risk-Based Maintenance Optimization of Deteriorating Bridges
(American Society of Civil Engineers, 2015) -
Splitting Strength of Small Dowel-Type Timber Connections: Rivet Joint Loaded Perpendicular to Grain
(American Society of Civil Engineers, 2014)The existing models for the prediction of the splitting failure of dowel-type connections loaded perpendicular to grain are determined generally based on crack growth of the entire member cross-section. These models can ...