Journal of Structural Engineering: Recent submissions
Now showing items 2321-2340 of 10765
-
Numerical Modeling of Concrete-Filled FRP Tubes’ Dynamic Behavior under Blast and Impact Loading
(American Society of Civil Engineers, 2016)A major difficulty of the analysis of and design for close-in blasts is the high variability of the blast shock waves and the complex interactions between these waves and structures. Close-in blasts also tend to be severe ... -
Modeling Reinforced Concrete Structures Using Smooth Plasticity and Damage Models
(American Society of Civil Engineers, 2016)In this work, a new smooth model for uniaxial concrete behavior that combines plasticity and damage considerations, together with unsymmetrical hysteresis for tension compression and nonlinear unloading, is presented. ... -
Experimental and Numerical Studies of Ferritic Stainless Steel Tubular Cross Sections under Combined Compression and Bending
(American Society of Civil Engineers, 2016)An experimental and numerical study of ferritic stainless steel tubular cross sections under combined loading is presented in this paper. Two square hollow section (SHS) sizes—SHS 40×40×2 and SHS 50×50×2 made of Grade EN ... -
Full-Scale Pseudodynamic Testing of Self-Centering Steel Plate Shear Walls
(American Society of Civil Engineers, 2016)This paper presents the first full-scale experimental investigation of the self-centering steel plate shear wall (SC-SPSW) system. The SC-SPSW system is a lateral force-resisting system developed to provide system recentering ... -
Push-Off Tests in the Study of Cyclic Behavior of Interfaces between Concretes Cast at Different Times
(American Society of Civil Engineers, 2016)The knowledge about the cyclic behavior and effects of fatigue on interfaces between concrete cast at different times, subjected to shear stress, is still very limited. This aspect is particularly relevant in structures ... -
Effects of Detailing on the Cyclic Behavior of Steel Baseplate Connections Designed to Promote Anchor Yielding
(American Society of Civil Engineers, 2016)This paper presents the results from an experimental investigation into the role that anchor selection, setting arrangement, and stretch length have on the post-yield behavior, rotation capacity, and ultimate strength of ... -
Demands on Reduced Beam Section Connections with Out-of-Plane Skew
(American Society of Civil Engineers, 2016)Some architectural designs for steel buildings require skew at moment frame connections. Reduced beam section (RBS) moment connections with out-of-plane skew have not been tested experimentally, and it is unclear how much ... -
Behavior and Strength of Headed Stud–SFRCC Shear Connection. I: Experimental Study
(American Society of Civil Engineers, 2016)The performance of a single-headed stud and group of studs embedded in steel-fiber-reinforced cementitious composites (SFRCC) were investigated by conducting push-out tests. A total of 16 specimens were tested with various ... -
Wind Load Combinations of Atypical Supertall Buildings
(American Society of Civil Engineers, 2016)Wind loads are generally divided into along-wind, across-wind, and torsional loads, but in reality they occur simultaneously in time and space. Furthermore, because they do not show their maximums at the same instant, they ... -
Effect of Environmental Aging on the Numerical Response of FRP-Strengthened Masonry Walls
(American Society of Civil Engineers, 2016)Recent durability studies have shown the susceptibility of bond in fiber-reinforced polymer (FRP) strengthened masonry components to hygrothermal exposures. However, it is not clear how this local material degradation ... -
Cyclic Load Tests on Self-Centering Concrete Pier with External Dissipators and Enhanced Durability
(American Society of Civil Engineers, 2016)A precast segmental pier using posttensioning technique has become a desirable candidate to realize rapid, environment-friendly bridge construction and minimal residual deformation. To avoid structural corrosion and to ... -
Experimental Characterization of a Composite Slab Subjected to Simulated Column Removal Loading
(American Society of Civil Engineers, 2016)Steel gravity frames are inherently simple systems, which has led to questions regarding their structural integrity or robustness. The concept of structural integrity is often tied to column removal scenarios in which the ... -
Influence of Dominant Response Modes on Structural Seismic Demand Modeling
(American Society of Civil Engineers, 2016)A seismic demand model attempts to describe the behavior of a structure in terms of a set of predictor variables that represents the loading. For buildings, the most frequently used demand parameter and predictor variables ... -
Influence of Vertical Ground Shaking on Horizontal Response of Seismically Isolated Buildings with Friction Bearings
(American Society of Civil Engineers, 2016)This paper focuses on a horizontal-vertical coupling effect observed in a full-scale shake table experiment of a 5-story moment frame building isolated with triple pendulum bearings. A significant increase or amplification ... -
An Engineering Application of Earthquake Early Warning: ePAD-Based Decision Framework for Elevator Control
(American Society of Civil Engineers, 2016)In a medium-to-large earthquake, there are often reports of people being trapped or injured in elevators. This study investigates using an earthquake early warning (EEW) system, which provides seconds to tens of seconds ... -
Full-Scale Tests and Numerical Analysis of Low-Rise CLT Structures under Lateral Loading
(American Society of Civil Engineers, 2016)This study examines the mechanical performance of large and small cross-laminated timber (CLT) wall panels with different applications. Two CLT structures were subjected to reversed cyclic lateral loads. One structure ... -
Analysis and Design of Noncompact and Slender CFT Beam-Columns
(American Society of Civil Engineers, 2016)Concrete-filled steel tube (CFT) beam-columns are categorized as compact, noncompact, or slender depending on the governing slenderness ratio (width-to-thickness b/t or D/t ratio, λ) of the steel-tube wall. The current ... -
Collapse Resistance of Steel Columns under Combined Axial and Lateral Loading
(American Society of Civil Engineers, 2016)The collapse resistance of steel columns subjected to combined axial and reversed lateral loading is investigated computationally. Detailed finite-element models that are validated using available experimental data are ... -
Behavior of Rectangular Reinforced-Concrete Columns under Biaxial Cyclic Loading and Variable Axial Loads
(American Society of Civil Engineers, 2016)The behavior of reinforced-concrete (RC) elements subjected to axial loading variation in conjunction with cyclic biaxial bending is recognized as a very important research topic with a reduced number of experimental results ... -
Hybrid Simulation of Thermomechanical Structural Response
(American Society of Civil Engineers, 2016)A new thermomechanical hybrid simulation method is proposed that extends the mechanical hybrid simulation method by including thermal degrees of freedom and temperature loads. The thermomechanical hybrid simulation method ...